|
weente
新手上路
积分 4
发帖 1
注册 2007-7-30
状态 离线
|
『楼 主』:
请教ms-dos7.10下的U盘热插拔问题
使用 LLM 解释/回答一下
我在一块工控机主板上，安装了一个纯DOS操作系统ms-dos7.10.并从网上下载了dos下USB
驱动(一共是四个文件,分别是DI1000DD.SYS,RAMFD.SYS,USBCD.SYS,USBASPI.SYS),添加到
系统安装文件夹下，并修改了启动设置config.sys文件，插上U盘重新启动，成功读写优盘
，但是中间拔下U盘再插上去，U盘就没反应了，试了好多次都这样。偶估计是没有热插拔
功能。不知MS-DOS是不是支持U盘热插拔？还是这个U盘驱动出问题了？
如果驱动没问题，是不是MS-DOS7.10下有专门的支持PNP的模块，只是我没有调用而已？
I am on an industrial control computer motherboard, installed a pure DOS operating system ms-dos7.10. And downloaded the USB driver under DOS from the Internet (a total of four files, namely DI1000DD.SYS, RAMFD.SYS, USBCD.SYS, USBASPI.SYS), added to the system installation folder, and modified the boot setting config.sys file, plugged in the USB flash drive and restarted, successfully read and wrote the USB flash drive, but when I unplugged the USB flash drive and plugged it in again, the USB flash drive didn't respond, tried many times like this. I suspect there is no hot-swapping function. Does MS-DOS support USB flash drive hot-swapping? Or is there a problem with this USB drive?
If the driver is okay, is there a special PNP support module under MS-DOS7.10, but I just didn't call it?
|
|
 2007-7-30 22:09 |
|
|
Climbing
铂金会员
网络独行侠
积分 6962
发帖 2753
注册 2003-4-16
来自 河北保定
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
DOS对USB设备的驱动仅止于从启动时识别并能访问而已，至于热插拔，这根本就不是DOS所具有的功能。
The driver of DOS for USB devices only stops at recognizing and being able to access when booting. As for hot - plugging, this is simply not a function that DOS has.
|
偶只喜欢回答那些标题和描述都很清晰的帖子！
如想解决问题，请认真学习“这个帖子”和“这个帖子”并努力遵守，如果可能，请告诉更多的人！
|
|
|
2007-7-30 23:58 |
|
|
alex0007
初级用户
积分 104
发帖 40
注册 2007-6-7
状态 离线
|
『第 3 楼』:
使用 LLM 解释/回答一下
pnp的功能我也是在gui时代的ms家族中开始听闻..
I first heard about the function of PnP in the GUI-era MS family..
|
|
|
2007-8-2 02:34 |
|
|
qzwqzw
银牌会员
天的白色影子
积分 2343
发帖 636
注册 2004-3-6
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
印象中论坛有人做了一款实DOS下支持USB设备热插拔的驱动
曾经了解了一下
不过是用device.com等驱动加载命令加载、卸载USB驱动而已
而且竟然把加载、卸载的批处理加了密
后来因为兼容性问题，没有再做深入的研究
记得是从论坛下载的
谁有兴趣可以再找找看
It is remembered that someone in the forum made a driver for supporting USB device hot - plugging under real DOS. I once got to know about it. But it was just loading and unloading the USB driver by using commands like device.com for driver loading and unloading. Moreover, the batch files for loading and unloading were encrypted. Later, due to compatibility problems, no further research was carried out. I remember it was downloaded from the forum. Anyone who is interested can look for it again.
|
|
|
2007-8-2 08:02 |
|
|
john12900
初级用户
积分 95
发帖 40
注册 2007-5-2
状态 离线
|
『第 5 楼』:
使用 LLM 解释/回答一下
谢谢楼上各位分享
Thanks to the friends above for sharing
|
|
|
2007-8-2 08:09 |
|
|
fujianabc
金牌会员
积分 3467
发帖 1616
注册 2004-6-21
状态 离线
|
『第 6 楼』:
使用 LLM 解释/回答一下
如果不用config.sys加载而用loadsys.exe加载驱动就可以热插拔了。
要拔u盘前用loadsys卸载usb驱动，插上之后再用loadsys加载usb驱动。
写两个简单的bat即可。
If you don't use config.sys to load but use loadsys.exe to load drivers, you can hot-swap. Before unplugging the USB flash drive, use loadsys to unload the USB driver, and after plugging it in, use loadsys to load the USB driver. Just write two simple batch files.
|
|
|
2007-8-3 10:25 |
|
|
hhb96998
初级用户
积分 20
发帖 9
注册 2010-2-16
来自 anhui
状态 离线
|
『第 7 楼』:
使用 LLM 解释/回答一下
朋友！你装DOS7.1用软盘还是别的啊！
Friend! You install DOS 7.1 with a floppy disk or something else!
|
|
|
2010-4-7 15:32 |
|
