|
manbuz
初级用户
 
积分 34
发帖 13
注册 2006-11-6
状态 离线
|
『楼 主』:
郎科U208制作U盘心得
使用 LLM 解释/回答一下
:D这个U盘从买回来的那天起,我想每一天没被我格个50次以上。。~
这个U盘用自带的格式工具,格成HDD能很顺利的引导到DOS下,但是格成ZIP后,则会显示missing opration system......,然后工作指示灯长亮“死”在这儿了~!
还有这个U盘有写保护功能,但是U盘里如果文件太乱或东西放太多,往往引导DOS时或运行U盘里某一个DOS软件则会出现,“。。。。回写磁盘出现错误,是否重试,电脑给你的选择只有(R),”结果就是,等于死机了,而且你重启也没用,运行这个软件时还是会这样,解决的办法就是,U盘碎片整理一下,或是重新格一遍成HDD,然后把该放的DOS工具软件再放上去。
HDD格式其实也是还行的,只是用不了PQ8.0了,运行后会提示什么什么参数错误。。后退出程序,但是相信还有其它更好的工具呢,如diskgen。。。等等
:D This USB flash drive, from the day I bought it, I think I format it more than 50 times every day.. ~
This USB flash drive can be smoothly booted to DOS when formatted as HDD using the built-in formatting tool, but when formatted as ZIP, it will display "missing operation system......", and then the working indicator light is always on and it "dies" here~!
Also, this USB flash drive has a write-protect function, but if the files in the USB flash drive are too messy or there are too many things, often when booting DOS or running a certain DOS software in the USB flash drive, it will appear, "...... There is an error in writing back to the disk, do you want to retry, the computer only gives you the choice of (R)", and the result is that it is equivalent to a死机, and you can't restart, and it will still be like this when running this software. The solution is to defragment the USB flash drive, or reformat it as HDD, and then put the required DOS tool software on it.
The HDD format is actually okay, but PQ8.0 can't be used. After running it, it will prompt something about parameter error and then exit the program, but I believe there are other better tools, such as diskgen... and so on
|
|
2006-11-28 12:51 |
|
|
manbuz
初级用户
 
积分 34
发帖 13
注册 2006-11-6
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
这个U盘算是做成功了,不过在不同的机子上启动后的起始盘会不一样~有时会A:\有时会C:\。。。。
我的做法是混合型,我的U盘是1G,郎科自带的能格成ZIP,但是引导不了(我是菜鸟),只能是没辙,后来用惠普的再格式化了一道,然后把刚才ZIP格式里的引导文件拷到U盘,重启后可以引导了~ 发现DOS三个主要文件要是换成IO.sys只有100多KB的就不能引导了,USBOOT里面用的都是这三个改进后的文件,MSDOS.sys只有几百字节的,
奇怪的是我实验的这个U盘无论在USB-FDD USB-HDD USB-ZIP 均能启动~!
This USB flash drive is considered successful, but the starting drive after booting on different machines will be different~ Sometimes it's A:\, sometimes it's C:\...
My method is a mixed type. My USB flash drive is 1GB. The Netac one can be formatted as ZIP, but it can't boot (I'm a newbie), so there's no way. Then I formatted it again with HP, and then copied the boot file from the just ZIP format to the USB flash drive. After restarting, it can boot~! I found that if the three main DOS files are replaced with IO.sys that is only more than 100KB, it can't boot. The ones used in USBOOT are all these improved files. MSDOS.sys is only a few hundred bytes.
It's strange that this USB flash drive I experimented with can boot in USB-FDD, USB-HDD, USB-ZIP~!
|
|
2006-12-1 04:34 |
|
|
sunsmile23
初级用户
 
积分 26
发帖 11
注册 2005-7-25
状态 离线
|
『第 3 楼』:
使用 LLM 解释/回答一下
看了一下,有些地方看不大明白。看来我的汉语理解力有限。
After taking a look, there are some parts that I don't quite understand. It seems my Chinese comprehension ability is limited.
|
|
2006-12-1 11:33 |
|
|
manbuz
初级用户
 
积分 34
发帖 13
注册 2006-11-6
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
也许本人描述的不清楚,不明白的你说出来
Maybe I didn't describe clearly. If you don't understand, please let me know.
|
|
2006-12-1 23:56 |
|
|
DOSforever
金牌会员
     
积分 4639
发帖 2239
注册 2005-1-30
状态 离线
|
|
2006-12-5 01:27 |
|
|
laomo
新手上路

积分 2
发帖 1
注册 2006-9-22
状态 离线
|
『第 6 楼』:
使用 LLM 解释/回答一下
这个U盘DOS引导,涉及的关系太多了,首先要硬件全部支持,再就是你做的要符合电脑主板和U盘的要求。我原来试做了一个较特别的U盘,结果启动中BIOS都不认,有的能认也不一定能做成。到底要解决那些问题,我总结的是:“我不可能都懂”!
This USB flash drive DOS boot involves too many relationships. First, all hardware must be supported, and second, what you make must meet the requirements of the computer motherboard and the USB flash drive. I originally tried to make a relatively special USB flash drive, and as a result, the BIOS didn't even recognize it during booting. Some that can be recognized don't necessarily be made successfully. What problems should be solved? I summed it up as: "I can't understand everything!"
|
|
2006-12-6 08:04 |
|
|
leopardsaga
初级用户
 
积分 66
发帖 32
注册 2008-11-5
状态 离线
|
|
2008-12-6 12:01 |
|
|
Qtwdftxvt
初级用户
 
积分 190
发帖 101
注册 2008-11-23
状态 离线
|
『第 8 楼』:
使用 LLM 解释/回答一下
usb zip 与 usb fdd 有什么区别呀?
What is the difference between usb zip and usb fdd?
|
|
2008-12-6 12:15 |
|
|
zrx1018
新手上路

积分 7
发帖 4
注册 2008-11-30
状态 离线
|
『第 9 楼』:
使用 LLM 解释/回答一下
我的也是208,我给量产成成cdrom和HDD,好的很
Mine is also 208. I mass-produced it into CDROM and HDD, and it's great
|
|
2008-12-10 11:55 |
|