大家知道,MS-DOS 7.10是一个非常强大实用、兼容性好,也使用最多的DOS操作系统。比如它支持各种FAT12、FAT16、FAT32分区、大硬盘、大内存、长文件名等。并且,在它上面可以通过WIN命令来启动DOS下著名的GUI程序--Windows 3.x和Windows 9x。
这是它的完整安装版,其安装程序采用向导式进行,通过此安装程序,大家可以方便地将MS-DOS 7.10安装到系统(硬盘)中。
安装程序的特点:全图形方式操作,可以选择安装路径(默认是C:\DOS71)、安装方式(完全安装、只安装DOS命令、最小安装)等,而且支持与Win9x的和平共处、自动识别系统中已有的Windows NT/2K/XP或者旧版本的DOS(如MS-DOS 6.x)、并可以让用户选择是否自动做成双启动!
新增支持插件功能(后面的跟帖中有插件下载,例如PDOS95插件、CCDOS97、Windows GUI插件等等,并有集合插件下载)!
说明:MS-DOS 7.10安装版当发现硬盘还未分区或格式化时,安装程序将自动对硬盘进行分区、格式化、激活分区等操作。然后继续进行MS-DOS 7.10的安装。
可以直接使用软盘安装版,即先做好安装软盘,然后用安装盘1启动系统后即可自动进行MS-DOS 7.10的完整安装(或用硬盘启动后直接运行里面的SETUP也行),按照提示进行下去即可完成安装:
现已将MS-DOS 7.10安装程序(软盘版)上传到newdos.yginfo.net上,下载地址(注:以下地址为永久下载地址):
安装盘1:
http://www.cn-dos.net/msdos71/dos71_1.zip (必需)
安装盘2:
http://www.cn-dos.net/msdos71/dos71_2.zip (可选)
也可以将这两个1.44MB的IMG软盘镜像做成光盘的720KB、1.44MB或2.88MB的启动镜像来进行安装。下面是它的光盘安装版:
安装光盘:
http://help.cn-dos.net/soft/dos71cd.zip
对于IMG文件,请用HD-COPY、WinImage等软件将它展开到软盘中并启动即可。而且它也可以在虚拟机(例如Virtual PC、VMWare、Bochs)下完全正常运行!所以也可以在虚拟机下来测试或使用这个MS-DOS 7.10完整安装版。
更多信息,请看下面的详细介绍。强烈建议先仔细阅读此文章,里面还有一些相关资料和屏幕快照等):
http://www.cn-dos.net/newdos/dosart32.htm
Everyone knows that MS-DOS 7.10 is a very powerful, practical, well-compatible, and most widely used DOS operating system. For example, it supports various FAT12, FAT16, FAT32 partitions, large hard disks, large memory, long file names, etc. And on it, you can use the WIN command to start the famous GUI programs under DOS - Windows 3.x and Windows 9x.
This is its full installation version. Its installation program is in a wizard mode. Through this installation program, everyone can easily install MS-DOS 7.10 to the system (hard disk).
Characteristics of the installation program: operates in full-graphic mode, can choose the installation path (default is C:\DOS71), installation method (full installation, install only DOS commands, minimal installation), etc., and supports coexistence with Win9x, automatically identifies existing Windows NT/2K/XP or older versions of DOS (such as MS-DOS 6.x) in the system, and allows users to choose whether to automatically make a dual boot!
Newly supports plug-in functions (there are plug-in downloads in the following posts, such as PDOS95 plug-in, CCDOS97, Windows GUI plug-in, etc., and there are also combined plug-in downloads)!
Note: When the MS-DOS 7.10 installation version finds that the hard disk is not partitioned or formatted, the installation program will automatically partition, format, and activate the partition of the hard disk. Then continue the installation of MS-DOS 7.10.
You can directly use the floppy disk installation version, that is, first make the installation floppy disk, then boot the system with installation disk 1, and then the complete installation of MS-DOS 7.10 will be automatically carried out (or run SETUP inside directly after booting from the hard disk), and follow the prompts to complete the installation:
Now the MS-DOS 7.10 installation program (floppy disk version) has been uploaded to newdos.yginfo.net. The download addresses (note: the following addresses are permanent download addresses):
Installation disk 1:
http://www.cn-dos.net/msdos71/dos71_1.zip (required)
Installation disk 2:
http://www.cn-dos.net/msdos71/dos71_2.zip (optional)
You can also make the two 1.44MB IMG floppy disk images into 720KB, 1.44MB, or 2.88MB boot images of the CD for installation. Here is its CD installation version:
Installation CD:
http://help.cn-dos.net/soft/dos71cd.zip
For the IMG file, use software such as HD-COPY, WinImage to expand it to the floppy disk and boot it. And it can also run normally in virtual machines (such as Virtual PC, VMWare, Bochs)! So you can also test or use this full MS-DOS 7.10 installation version in the virtual machine.
For more information, please see the detailed introduction below. It is strongly recommended to read this article carefully first. There are also some relevant materials and screen shots, etc.):
http://www.cn-dos.net/newdos/dosart32.htm