|
chinaboy
初级用户
 
积分 115
发帖 4
注册 2002-10-25
状态 离线
|
『楼 主』:
在DOS下使用PCMCIA光驱
使用 LLM 解释/回答一下
先下一个驱动 http://www.mydrivers.com/dir59/d23892.htm
解压缩。
WIN98带系统格式化一张软盘,把WINDOWS目录下的himem.sys和mscdex.exe拷到软盘。把上面解压缩后得到的一个目录PCMIDE拷到软盘。
编辑config.sys
menuitem=CD, Start computer with CD-ROM support.
menuitem=PCMIDE, Start computer with PCMIDE CD-ROM support.
menudefault=CD,30
menucolor=7,0
device=himem.sys /testmemff
device=a:\pcmide\statpcdm.sys/d:mscd001
device=himem.sys /testmemff
REM ****** (PCMCIA/ATAPI SERVICES) ********
DEVICE=A:\PCMIDE\PCMI80CL.SYS /Q9 /P0
DEVICE=A:\PCMIDE\STATPCDM.SYS /D:MSCD001
files=10
buffers=10
dos=high,umb
stacks=9,256
lastdrive=z
编辑autoexec.bat
mscdex.exe/d:mscd001
用软盘启动系统,出现选择菜单,第一项为加载普通光驱,第二项为加载PCMCIA光驱。
在TP600上通过。
First, download a driver: http://www.mydrivers.com/dir59/d23892.htm
Extract it.
Format a floppy disk with the WIN98 system, and copy himem.sys and mscdex.exe from the WINDOWS directory to the floppy disk. Copy the decompressed directory PCMIDE to the floppy disk.
Edit config.sys
menuitem=CD, Start computer with CD-ROM support.
menuitem=PCMIDE, Start computer with PCMIDE CD-ROM support.
menudefault=CD,30
menucolor=7,0
device=himem.sys /testmemff
device=a:\pcmide\statpcdm.sys/d:mscd001
device=himem.sys /testmemff
REM ****** (PCMCIA/ATAPI SERVICES) ********
DEVICE=A:\PCMIDE\PCMI80CL.SYS /Q9 /P0
DEVICE=A:\PCMIDE\STATPCDM.SYS /D:MSCD001
files=10
buffers=10
dos=high,umb
stacks=9,256
lastdrive=z
Edit autoexec.bat
mscdex.exe/d:mscd001
Boot the system with the floppy disk, and a selection menu will appear. The first item is to load the normal CD-ROM, and the second item is to load the PCMCIA CD-ROM.
It works on TP600.
|
|
2002-10-25 00:00 |
|
|
justinshen
初级用户
 
积分 103
发帖 1
注册 2002-11-5
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
可是我的本本是compaq N400c的,按照上边的制作后总是提示没有安装card service,这个怎么搞定?请大侠赐教!
But my laptop is a Compaq N400c. After making according to the above, it always prompts that card service is not installed. How to fix this? Please master give advice!
|
|
2002-11-5 00:00 |
|
|
wang6-6
初级用户
 
积分 148
发帖 20
注册 2003-3-24
状态 离线
|
『第 3 楼』:
使用 LLM 解释/回答一下
我的笔记本没有软驱,在win98启动时按f8进dos后,怎样用pcmcia光驱呢?
My notebook doesn't have a floppy drive. After entering DOS by pressing F8 during Win98 startup, how to use the PCMCIA CD - ROM?
|

=================================
爱dos,难道需要理由吗?
=================================
我不是高手,希望与大家成为朋友。QQ:33408659 |
|
2003-3-25 00:00 |
|
|
mys
元老会员
        
积分 5170
发帖 1637
注册 2002-10-16 来自 广东佛山
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
那恐怕只好修改WIN98本身的CONFIG.SYS和autoexec.bat文件来加载了。
Then it is恐怕 have to modify the CONFIG.SYS and autoexec.bat files of WIN98 itself to load.
Wait, no, the correct translation should be: Then it is恐怕 have to modify the CONFIG.SYS and autoexec.bat files of WIN98 itself to load? No, that's wrong. Let's do it again.
Then I'm afraid we have to modify the CONFIG.SYS and autoexec.bat files of WIN98 itself to load them.
|

我的网志
http://hzmys.blog.163.com/
我的网盘
firststep.qjwm.com
fsmys.ys168.com
ssmys.ys168.com
www.brsbox.com/fsmys
www.brsbox.com/ssmys
www.brsbox.com/ccdos
|
|
2003-3-25 00:00 |
|
|
Wengier
系统支持
             “新DOS时代”站长
积分 27736
发帖 10521
注册 2002-10-9
状态 离线
|
『第 5 楼』:
使用 LLM 解释/回答一下
我觉得Win98自带的那个MS-DOS 7.x启动盘中的CONFIG.SYS和AUTOEXEC.BAT文件没有任何参考价值,所以我的MS-DOS 7.10启动盘中的这些配置文件从头到尾都是我自己编写的。
I think the CONFIG.SYS and AUTOEXEC.BAT files in the MS-DOS 7.x startup disk that comes with Win98 are of no reference value at all, so the configuration files in my MS-DOS 7.10 startup disk are written by myself from start to finish.
|

Wengier - 新DOS时代
欢迎大家来到我的“新DOS时代”网站,里面有各类DOS软件和资料,地址:
http://wendos.mycool.net/
E-Mail & MSN: wengierwu AT hotmail.com (最近比较忙,有事请联系DOSroot和雨露,谢谢!)
 |
|
2003-3-25 00:00 |
|