中国DOS联盟

大家好，有没有人知道DOS下如何用量产USB-CDROM做一键GHOST 下面的是我自己做的，只能在老一点的机器上用，最新的电脑老是说找不到光驱 这是我的autoexec.bat @ECHO OFF smartdrv.exe set EXPAND=YES SET DIRCMD=/O:N set LglDrv=27 * 26 Z 25 Y 24 X 23 W 22 V 21 U 20 T 19 S 18 R 17 Q 16 P 15 set LglDrv=%LglDrv% O 14 N 13 M 12 L 11 K 10 J 9 I 8 H 7 G 6 F 5 E 4 D 3 C cls call setramd.bat %LglDrv% set temp=%RAMD%:\ set tmp=%RAMD%:\ path=%RAMD%:\;a:\;%CDROM%: copy command.com %RAMD%:\ > NUL set comspec=%RAMD%:\command.com copy extract.exe %RAMD%:\ > NUL :ERROR IF EXIST ebd.cab GOTO EXT echo Please insert Windows 98 Startup Disk 2 echo. pause GOTO ERROR :EXT %RAMD%:\extract /y /e /l %RAMD%: ebd.cab > NUL echo The diagnostic tools were successfully loaded to drive %RAMD%. echo. IF "%config%"=="NOCD" GOTO QUIT IF "%config%"=="HELP" GOTO HELP echo. GOTO QUIT :HELP cls call help.bat echo Your computer will now restart and the startup menu will appear. restart.com GOTO QUIT :QUIT echo. devload.com Usbaspi.sys /norst /nocbc /r /e devload.com USBCD.SYS /D:usbcd001 goto end :end LH MSCDEX.EXE /D:mscd001 /D:usbcd001 /L:%CDROM% LH DOSKEY.COM > NUL findcd /s>nul %CDROM%: ghost -nousb -noide -clone,mode=pload,src=ghostxp.gho:1,dst=1:1 -crcignore -sure -rb 下面的是config.sys device=himem.sys /testmem:off devicehigh=RAMFD.SYS [COMMON] files=10 buffers=10 dos=high,umb stacks=9,256 devicehigh=ramdrive.sys /E 8192 lastdrive=z 老是说找不到光驱 ERROR: Target USB device not found [ Last edited by panqunzhou on 2010-7-10 at 01:49 ]

新主板 就是这样，我也不明白 是为何，你试试不加载 Usbaspi.sys 驱动看看。

楼主，你写的，看的我都要头晕了。。。

淘宝网址：http://shop62365712.taobao/ 客服QQ：859230308，859096898