中国DOS联盟

-- 联合DOS 推动DOS 发展DOS --

联盟域名：www.cn-dos.net 论坛域名：www.cn-dos.net/forum
DOS，代表着自由开放与发展，我们努力起来，学习FreeDOS和Linux的自由开放与GNU精神，共同创造和发展美好的自由与GNU GPL世界吧！

游客: 注册 | 登录 | 命令行 | 搜索 | 上传 | 帮助 »

中国DOS联盟论坛 » DOS启动盘 & LOGO技术（启动盘室） » 关于USB光驱DOS引导的问题请教？？？？

English/Chinese Fix Translation

zxf517
新手上路

积分 14
发帖 4
注册 2006-10-6
状态离线

『楼主』: 关于USB光驱DOS引导的问题请教？？？？使用 LLM 解释/回答一下

关于USB光驱DOS引导的问题请教

系统配置：
本人两台电脑，均为IBM，均安装XP 专业版操作系统。1台为R51，内置光驱；1台为X60S无光驱，配了一个外置USB的小光驱，机器用NERO 7 INFO TOOL验测为SONY Q58A的DVD-RW驱动器。

系统环境：
用GHOST分别在两台机上做了R51.GHO和X60S.gho
在X60S机器上分别用WIN98的IMA文件刻了两张光盘，一张用于引导R51，一张用于引导X60S。

系统问题：
两光盘制好后，两张光盘均在R51内置的光驱中可以引导，并驱动光驱，用光驱中的GHO文件进行恢复。而用外置光驱引导X60S机器时，可以实现引导，但不能访问光驱（找不到光盘盘符），更访问不了文件。

系统问题分析：
初步断定是这个WIN 98的IMA文件中的DOS光驱驱动（OAKCDROM.SYS)不能驱动光驱所致。想到本人这台X60S安装XP时是用这个外置光驱从XP引导光盘引导安装的，说明XP的光驱驱动很强，也提取过IMA文件，但发现盘有6个IMA文件，不知道那个可以驱动，又不知道那个是这个光驱驱动。也试了几个其它的IBM的USB驱动的IMA，还有几位大侠的IMA文件，都不行。在网上也找了半天也找不到这个DOS下的USB SONY Q58A DVD刻录光驱驱动，找了这么多天才发现这个网站，所以发贴向大家求助。问谁有这样的光驱驱动的SYS文件呀？怎么用呀？或是怎么样才可以驱动我这个光驱呀？

另还有一问，新注册的会员要等一个小时才可以发贴，等了我好久，建议版主改一下参数了。

Last edited by zxf517 on 2006-10-14 at 10:30 ]

Questions about USB CD-ROM DOS boot

System configuration:
I have two computers, both are IBM, both installed XP Professional operating system. One is R51 with built-in CD-ROM; the other is X60S without CD-ROM, equipped with an external USB small CD-ROM. The machine was tested with NERO 7 INFO TOOL as a SONY Q58A DVD-RW drive.

System environment:
Used GHOST to make R51.GHO and X60S.gho on the two machines respectively.
On the X60S machine, used the IMA file of WIN98 to burn two discs, one for booting R51 and one for booting X60S.

System problem:
After the two discs were made, both discs can be booted in the built-in CD-ROM of R51 and drive the CD-ROM, and use the GHO file in the CD-ROM for restoration. But when using the external CD-ROM to boot the X60S machine, it can be booted, but the CD-ROM cannot be accessed (no CD-ROM drive letter found), and the files cannot be accessed.

System problem analysis:
Initially determined that it is because the DOS CD-ROM driver (OAKCDROM.SYS) in this WIN 98 IMA file cannot drive the CD-ROM. I thought that when I installed XP on this X60S, I used this external CD-ROM to boot from the XP boot CD for installation, which shows that the XP CD-ROM driver is very strong. I also extracted the IMA file, but found that there are 6 IMA files on the disc, and I don't know which one can be driven, and I don't know which one is this CD-ROM driver. I also tried several other IBM USB driver IMA, and also the IMA files of several great gods, but it didn't work. I also searched the Internet for a long time and couldn't find the DOS USB SONY Q58A DVD burner CD-ROM driver. I found this website after searching for so many days, so I posted to ask everyone for help. Does anyone have such a CD-ROM driver SYS file? How to use it? Or how can I drive my CD-ROM?

Another question: Newly registered members have to wait for an hour to post. It has been waiting for me for a long time. I suggest the moderator change the parameters.

Last edited by zxf517 on 2006-10-14 at 10:30 ]

2006-10-6 11:57