|
goli2008
中级用户
  
积分 252
发帖 97
注册 2006-9-17
状态 离线
|
『第 31 楼』:
使用 LLM 解释/回答一下
有几个朋友说这个软件这个软件自带木马病毒,本人郑重声明:本软件绝无任何木马病毒!!!!!!!
如果你的防毒软件报说本软件带有木马病毒,有两个原因:
1、本软件运行时,会修改启动文件,并将运行所需的文件解压放到硬盘,一些不完善的防毒软件可能会误报。(本人用瑞星、卡巴等时均未报说有木马病毒)
2、您的系统可能染上了病毒,病毒又感染本文件。
本文件自带木马病毒判断功能,识别如下:让本软件运行10秒钟以上,如果本软件提示说有木马病毒,那么你的文件的确被感染了,请用杀毒软件进行杀毒;如果没有报说,那请您放心使用,保证不会有木马病毒。
由于以上原因,给您造成不便,请谅。
A few friends said that this software has a Trojan virus by itself. I solemnly declare: This software has no Trojan virus at all!!!!!!!!
If your antivirus software reports that this software has a Trojan virus, there are two reasons:
1. When this software runs, it will modify the startup file and extract the files required for operation to the hard disk. Some imperfect antivirus software may misreport. (I have never reported a Trojan virus when using Rising, Kaspersky, etc.)
2. Your system may be infected with a virus, and the virus infects this file.
This file has a Trojan virus judgment function, which is identified as follows: Let this software run for more than 10 seconds. If this software prompts that there is a Trojan virus, then your file is indeed infected. Please use an antivirus software to kill the virus; if there is no report, then please rest assured to use it, and there will be no Trojan virus for sure.
Due to the above reasons, we apologize for the inconvenience caused to you.
|
|
2006-10-26 23:13 |
|
|
zlgs
初级用户
 
积分 88
发帖 45
注册 2005-9-7
状态 离线
|
『第 32 楼』:
使用 LLM 解释/回答一下
花了不少心思~~
支持一下
想研究一下批处理关于ghost的命令行,可否提供
压缩率设置了哪一级~~
Spent quite a bit of thought~~
Support it
Want to study the command line of ghost in batch processing, can you provide
Which level is the compression ratio set to~~
|
|
2006-10-27 12:29 |
|
|
lianjiang2004
金牌会员
     
积分 3946
发帖 1884
注册 2006-1-20
状态 离线
|
『第 33 楼』:
使用 LLM 解释/回答一下
Originally posted by zlgs at 2006-10-27 12:29:
花了不少心思~~
支持一下
想研究一下批处理关于ghost的命令行,可否提供
压缩率设置了哪一级~~
用的是z2。
----------------
rem 还原
if exist ghost.hy ghost.exe -clone,mode=pload,src=1:2:\GLghos~1\SYSTEM.GHO:1,DST=1:1 -fx -sure -rb
rem 备份
if exist ghost.bf ghost.exe -clone,mode=pdump,src=1:1,DST=1:2:\GLghos~1\SYSTEM.GHO /z2 -fx -sure -rb
Originally posted by zlgs at 2006-10-27 12:29:
Spent quite a bit of effort~~
Support it
Want to study the command line of batch processing about ghost, can you provide
Which level is the compression ratio set to~~
Used is z2.
----------------
rem Restore
if exist ghost.hy ghost.exe -clone,mode=pload,src=1:2:\GLghos~1\SYSTEM.GHO:1,DST=1:1 -fx -sure -rb
rem Backup
if exist ghost.bf ghost.exe -clone,mode=pdump,src=1:1,DST=1:2:\GLghos~1\SYSTEM.GHO /z2 -fx -sure -rb
|
|
2006-10-27 19:54 |
|
|
lianjiang2004
金牌会员
     
积分 3946
发帖 1884
注册 2006-1-20
状态 离线
|
『第 34 楼』:
使用 LLM 解释/回答一下
在我的机上第二分区是隐藏的备用的win2k,无法用这软件备份。
On my computer, the second partition is a hidden backup of win2k, and this software cannot back it up.
|
|
2006-10-27 19:55 |
|
|
goli2008
中级用户
  
积分 252
发帖 97
注册 2006-9-17
状态 离线
|
『第 35 楼』:
使用 LLM 解释/回答一下
Originally posted by lianjiang2004 at 2006-10-27 19:54:
用的是z2。
----------------
rem 还原
if exist ghost.hy ghost.exe -clone,mode=pload,src=1:2:\GLghos~1\SYSTEM.GHO:1,DST=1:1 -fx -sure -rb
rem 备份
if ...
对!
压缩用Z2是比较理想的设置,压缩率与速度均有保证
Originally posted by lianjiang2004 at 2006-10-20 19:54:
Using z2.
----------------
rem Restore
if exist ghost.hy ghost.exe -clone,mode=pload,src=1:2:\GLghos~1\SYSTEM.GHO:1,DST=1:1 -fx -sure -rb
rem Backup
if ...
Right!
Setting Z2 for compression is relatively ideal, with both compression ratio and speed guaranteed
|
|
2006-10-27 20:57 |
|
|
zlgs
初级用户
 
积分 88
发帖 45
注册 2005-9-7
状态 离线
|
『第 36 楼』:
使用 LLM 解释/回答一下
我认为用-z4最好
还有那个美女图片新鲜一下还可以
如果内嵌软件感觉档次太低
还不如干脆干掉logo
还有一些dos反馈信息应尽用">nul"去掉
这些修改映像文件都可办到
但是却不能集成到楼主一样的一个文件中
楼主有升级的计划没有
I think using -z4 is the best. Also, refreshing with some beauty pictures is okay. If embedding software feels too low-grade, it's better to just get rid of the logo. There are also some DOS feedback messages that should be removed using ">nul". These modifications to the image file can all be done, but they can't be integrated into a single file like the楼主's. Does the楼主 have any upgrade plans?
|
|
2006-10-28 23:51 |
|
|
goli2008
中级用户
  
积分 252
发帖 97
注册 2006-9-17
状态 离线
|
『第 37 楼』:
使用 LLM 解释/回答一下
Originally posted by zlgs at 2006-10-28 23:51:
我认为用-z4最好
还有那个美女图片新鲜一下还可以
如果内嵌软件感觉档次太低
还不如干脆干掉logo
还有一些dos反馈信息应尽用">nul"去掉 ...
原来是有NUL命令的,后来我发现在一些比较慢的机器上运行时,给人有死机的错觉,所以才去掉NUL的,:)
Originally posted by zlgs at 2006-10-28 23:51:
I think using -z4 is the best
Also, refreshing with that beauty picture is okay
If embedding software feels too low-grade
It's better to just get rid of the logo
Also, some DOS feedback information should be removed with ">nul" as much as possible...
Originally, there was the NUL command, but later I found that when running on some slower machines, it gives the illusion of a freeze, so I removed NUL, :)
|
|
2006-10-30 02:53 |
|
|
zhixue209
新手上路

积分 2
发帖 1
注册 2006-11-11
状态 离线
|
『第 38 楼』:
使用 LLM 解释/回答一下
楼主的东东,我下载了试用,确实有些机子是可以用,有二台机子也是出现见到图像就不动了:(我想问下,现在的这个还原系统,就是在有分区,系统装好的情况下使用,能不能实现像一健还原精灵类似的,自动在DOS下无损分区,使用的软件一般都是PQ,无忧也有脚本,楼主要不要研究一下,个人觉得这样子,才算一个比较完美的程序
The things of the LZ, I downloaded and tried them. Indeed, some machines can be used, but there are two machines where it freezes when seeing the image: (I want to ask, now for this restore system, when there are partitions and the system is installed, can it achieve similar to the one-key restore spirit, automatically partition without loss in DOS. The software generally is PQ, and Wuyou also has scripts. Does the LZ want to study it? Personally, I think this way, it can be regarded as a relatively perfect program
|
|
2006-11-12 01:47 |
|
|
kkkgye
中级用户
  
积分 209
发帖 44
注册 2003-7-6
状态 离线
|
『第 39 楼』:
使用 LLM 解释/回答一下
谢谢楼主的热心提供。。。
Thanks to the LZ's enthusiastic provision...
|
|
2006-11-29 12:59 |
|