|
lyq325
中级用户
积分 290
发帖 63
注册 2003-5-3
状态 离线
|
『第 31 楼』:
使用 LLM 解释/回答一下
我不知道是中毒 还是逻辑锁（这几天在论坛上听说的一种东西） 还是有被病毒破坏的硬盘有坏区了~我该怎么办呢？
I don't know if it's a virus, or a logic lock (something I heard about on the forum these past few days), or if there are bad sectors on the hard drive damaged by a virus~ What should I do?
|
|
 2003-5-6 00:00 |
|
|
红色狂想
金牌会员
龙哥DOS
积分 4289
发帖 1501
注册 2003-2-23
来自 河南省
状态 离线
|
『第 32 楼』:
使用 LLM 解释/回答一下
你的 D，E，F 盘上有多少你舍不得的文件，都是什么文件？
How many files on your D, E, F drives are the ones you can't bear to part with, and what are those files?
|
C++C++C++C++C++C++C++C++C++C++C++C++C++C++C++
C++ ☆☆☆ 中国ＤＯＳ联盟成员 ☆☆☆ C++
C++ ★★★ 爱提问的红色狂想 ★★★ C++
C++C++C++C++C++C++C++C++C++C++C++C++C++C++C++ |
|
|
2003-5-6 00:00 |
|
|
lyq325
中级用户
积分 290
发帖 63
注册 2003-5-3
状态 离线
|
『第 33 楼』:
使用 LLM 解释/回答一下
都是一直以来收集的各样东西 有程序 娱乐的东西 图片 音乐等等 如果不到万不得已 我是不想把这些数据都弄没的……唉~：（
现在就是提示我c盘没有准备好 但是我的确电源线和数据县都插上了~而且我以前也没动过这些东西 就是上网时忽然死机 出现的错误 然后我就拆过硬盘 不过我是按照原先的 样子把硬盘装上的 不应该有错误啊 这是为什么……~55555~~~
These are all kinds of things collected over the years, including programs, entertainment stuff, pictures, music, etc. I don't want to lose all this data unless it's absolutely necessary... Alas~ :(
Now it's prompting me that the C drive isn't ready. But I did plug in the power cord and the data cable~ And I didn't touch these things before. It just froze when I was surfing the Internet, and then this error appeared. Then I took apart the hard drive, but I installed the hard drive back exactly as it was originally, so there shouldn't be an error. Why is this...~55555~~~
|
|
|
2003-5-6 00:00 |
|
|
红色狂想
金牌会员
龙哥DOS
积分 4289
发帖 1501
注册 2003-2-23
来自 河南省
状态 离线
|
『第 34 楼』:
使用 LLM 解释/回答一下
你的 D，E，F 盘现在可以访问吗，内部的文件可以使用吗？
Can you access drives D, E, and F now, and can you use the files inside them?
|
C++C++C++C++C++C++C++C++C++C++C++C++C++C++C++
C++ ☆☆☆ 中国ＤＯＳ联盟成员 ☆☆☆ C++
C++ ★★★ 爱提问的红色狂想 ★★★ C++
C++C++C++C++C++C++C++C++C++C++C++C++C++C++C++ |
|
|
2003-5-6 00:00 |
|
|
如是大师
元老会员
步行的人
积分 9654
发帖 3351
注册 2003-3-11
来自 湖北
状态 离线
|
『第 35 楼』:
使用 LLM 解释/回答一下
怎么回到低格的地步呢？估计是，当初装机商用dm分的区吧。。不是问题。用spfdisk删除c盘，再重建，格式化就好了。有耐心的话，先用ndd2002修复一下试试。。。。
How to get back to the low-level formatting situation? It is estimated that it was the area divided by dm when installing the commercial machine at the beginning. It's not a problem. Delete the C drive with spfdisk, then recreate and format it. If you are patient, first try to repair it with ndd2002.
|
弄花香满衣，掬水月在手。
明月鹭鸟飞， 芦花白马走。
我自一过后，野渡现横舟。
青云碧空在，净瓶水不流。
http://dos.e-stone.cn/guestbook/index.asp
＝＝＝＝＝＝中國DOS聯盟＝＝＝＝＝
我的新网页http://rsds.7i24.com欢迎光顾 |
|
|
2003-5-6 00:00 |
|
|
lyq325
中级用户
积分 290
发帖 63
注册 2003-5-3
状态 离线
|
『第 36 楼』:
使用 LLM 解释/回答一下
现在除了a盘 只能看见c盘和d盘。其中c盘不能做任何操作 做任何操作都是提示找不到c盘
至于d盘 我原先存在d怕的东西都没了 用rdos启动 d盘什么也没有 用超级msdos启动 d盘只有启动盘里有的一些东西 包括什么fdisk 等等命令而已 原先的东西也没有了 e和f盘都没有 找不到 我用ndd扫描时 到达3%就读不过去了 硬盘有刷刷的声音（硬盘没出事前没有过这声音）一直停留在3%的位置上 ！
可能是0磁道损坏？还是什么损坏 ？
各位大哥帮帮我吧！！！
Now, besides drive A, only drive C and drive D are visible. Among them, drive C cannot be operated at all; any operation prompts that drive C is not found. As for drive D, the things I originally stored in drive D are all gone. When booted with rdos, drive D has nothing. When booted with Super MSDOS, drive D only has some things from the boot disk, including commands like fdisk, etc., and the original things are also gone. Drives E and F do not exist and cannot be found. When I scanned with NDD, it got stuck at 3% and couldn't proceed. There is a clicking sound from the hard disk (this sound didn't exist before the hard disk had an issue), and it has been stuck at 3% all the time! Maybe the track 0 is damaged? Or something else is damaged? Everyone, please help me!!!
|
|
|
2003-5-7 00:00 |
|
|
如是大师
元老会员
步行的人
积分 9654
发帖 3351
注册 2003-3-11
来自 湖北
状态 离线
|
『第 37 楼』:
使用 LLM 解释/回答一下
哦，这个d盘并不是你硬盘上的D盘，它是启动盘创建的虚拟盘。。。。用diskgen看看吧。。。这是硬盘分区表丢失了的现象。。。。不要紧的。。
Oh, this D drive is not the D drive on your hard disk; it's a virtual disk created by the boot disk... Use DiskGen to take a look... This is a phenomenon where the hard disk partition table is lost... It's okay.
|
弄花香满衣，掬水月在手。
明月鹭鸟飞， 芦花白马走。
我自一过后，野渡现横舟。
青云碧空在，净瓶水不流。
http://dos.e-stone.cn/guestbook/index.asp
＝＝＝＝＝＝中國DOS聯盟＝＝＝＝＝
我的新网页http://rsds.7i24.com欢迎光顾 |
|
|
2003-5-7 00:00 |
|
|
lyq325
中级用户
积分 290
发帖 63
注册 2003-5-3
状态 离线
|
『第 38 楼』:
使用 LLM 解释/回答一下
大师大哥 我现在该怎么办呢？因为我什么都不是很懂 所以您光告诉我用什么看看 我不是很明白的 我该具体怎么做呢？我现在只有两个启动盘（rdos和msdos） ndd放在rdos的启动盘里
您说的这个我不知道有没有 也不知道怎么用！
而且 “我用ndd扫描时 到达3%就读不过去了 硬盘有刷刷的声音（硬盘没出事前没有过这声音）一直停留在3%的位置上 ！”
这是什么 原因呢？？我现在就不知道因是物理损坏还是里面的文件（分区表，引导记录 什么的）损坏
我最开始在同学的电脑上是能用win98 的启动盘启动的（现在不行了，只能用上述的两个启动盘），当时cdef盘都在 而且也可以看见里面的数据 当时格式化c盘的时候就是到达3%的时候过不去了 硬盘一直刷刷的响 屏幕上有数字在慢慢的动 好象正在扫描似的的感觉（因为我不懂是什么意思，所以是感觉好象在扫描一样） 同学说好象是蔟的问题（他也不是很明白）
这可能是什么原因呢？
Master大哥, what should I do now? Because I don't understand anything very much, so just telling me what to use to check, I don't understand clearly. What should I do specifically? I only have two boot disks now (rdos and msdos), and ndd is placed in the rdos boot disk. I don't know if this exists or how to use it!
And "when I scanned with ndd, it couldn't read past 3%, and the hard drive made a whooshing sound (it didn't have this sound before the hard drive had problems) and stayed at 3% all the time!"
What is the reason for this?? Now I don't know if it's a physical damage or the files inside (partition table, boot record, etc.) are damaged.
I could originally boot with a Win98 boot disk on my classmate's computer (now I can't, only the above two boot disks can be used). At that time, the C, D, E, F drives were all there, and I could also see the data inside. When I formatted the C drive at that time, it couldn't pass at 3%, the hard drive kept whooshing, and there were numbers moving on the screen. It seemed like it was scanning (because I don't understand what it means, so it feels like it's scanning). My classmate said it seemed like a cluster problem (he doesn't understand very well either).
What might be the reason for this?
|
|
|
2003-5-7 00:00 |
|
|
如是大师
元老会员
步行的人
积分 9654
发帖 3351
注册 2003-3-11
来自 湖北
状态 离线
|
『第 39 楼』:
使用 LLM 解释/回答一下
你执行diskgen，是中文的，不用中文平台，看看各分区的情况，如果什么也没有，就选重建分区表的选项，执行，看能不能找回你的分区。自动的不行就用手动。找回后，存盘重启，就可以找回你丢失的数据了。。。。这是典型的分区表被破坏的症状。。。
执行后，有什么情况，再说说。。。。我再来想办法。。。。
You run diskgen, which is in Chinese. Without a Chinese platform, check the situation of each partition. If there's nothing, select the option to rebuild the partition table, execute it, and see if you can retrieve your partitions. If automatic doesn't work, use manual. After retrieving, save the changes and restart, then you can retrieve your lost data... This is a typical symptom of partition table corruption... After execution, let me know what happens... Then I'll figure out a way...
|
弄花香满衣，掬水月在手。
明月鹭鸟飞， 芦花白马走。
我自一过后，野渡现横舟。
青云碧空在，净瓶水不流。
http://dos.e-stone.cn/guestbook/index.asp
＝＝＝＝＝＝中國DOS聯盟＝＝＝＝＝
我的新网页http://rsds.7i24.com欢迎光顾 |
|
|
2003-5-7 00:00 |
|
|
lyq325
中级用户
积分 290
发帖 63
注册 2003-5-3
状态 离线
|
『第 40 楼』:
使用 LLM 解释/回答一下
好的 多谢大师大哥！我先去弄弄 然后不懂的我再问 多谢您
顺便问你一下 象我这种情况 最坏的情况是什么呢？我一直没动过硬盘 这次应该是病毒作怪 应该不会有太大的物理损坏 实在不行的话 我低格硬盘 是不是就能解决所有问题了？引导记录 分区表 分配表什么的都好了吧？
唉~实在不行 就只能低格 数据没了 总比硬盘没了强！！
Okay, thank you, master brother! I'll go and do it first. I'll ask you again if I don't understand. Thank you. By the way, what's the worst case for my situation? I've never touched the hard drive. This time it should be caused by a virus. There shouldn't be too much physical damage. If it really doesn't work, can I low-level format the hard drive to solve all problems? The boot record, partition table, allocation table, etc. will all be okay? Alas~ If it really doesn't work, I can only low-level format. The data is gone, but it's better than the hard drive being gone!
|
|
|
2003-5-7 00:00 |
|
|
lyq325
中级用户
积分 290
发帖 63
注册 2003-5-3
状态 离线
|
『第 41 楼』:
使用 LLM 解释/回答一下
大师大哥 忘记问您了 您说的这个diskgen 我的这两个启动盘上有吗？
我这几天确认过了 应该主板没问题 因为没有任何主板损坏的迹象 不过我进入bios设置 看硬盘时 有时候硬盘的名字会显示乱码 有时候就不会
应该是硬盘的问题了~现在我不太懂 手里也只有dm 和ndd 两个工具（不包括启动盘里的那些） 所以还请您多多帮助我 小弟万分感谢了！！！！
Master大哥, I forgot to ask you. Does this diskgen exist on my two boot disks?
I've confirmed these days that the motherboard should be okay because there are no signs of motherboard damage. But when I enter the BIOS setup and check the hard drive, sometimes the name of the hard drive shows garbled characters, and sometimes it doesn't.
It should be a problem with the hard drive~ Now I don't understand much, and I only have two tools, dm and ndd, on hand (excluding those in the boot disk), so please help me a lot, little brother is very grateful!!!
|
|
|
2003-5-7 00:00 |
|
|
如是大师
元老会员
步行的人
积分 9654
发帖 3351
注册 2003-3-11
来自 湖北
状态 离线
|
『第 42 楼』:
使用 LLM 解释/回答一下
diskgen在http://newdos.yginfo.net/应该有吧，找不到的话，在软件区发个贴。。。。
你的bios能检测到硬盘，说明问题不大。。。不要急。。。。
diskgen should be available at http://newdos.yginfo.net/; if you can't find it, post a thread in the software section...
Your BIOS can detect the hard drive, which means the problem is not serious... Don't be anxious...
|
弄花香满衣，掬水月在手。
明月鹭鸟飞， 芦花白马走。
我自一过后，野渡现横舟。
青云碧空在，净瓶水不流。
http://dos.e-stone.cn/guestbook/index.asp
＝＝＝＝＝＝中國DOS聯盟＝＝＝＝＝
我的新网页http://rsds.7i24.com欢迎光顾 |
|
|
2003-5-7 00:00 |
|
|
lyq325
中级用户
积分 290
发帖 63
注册 2003-5-3
状态 离线
|
『第 43 楼』:
使用 LLM 解释/回答一下
我现在只知道硬盘认不出来 现在从启动盘进去以后 只有c：能进（刚才听大师大哥说了 d：是启动盘创建的虚拟区） 虽然能显示c：\> 但是做任何操作都不行 提示我读不到c驱 其他区也进不去 提示不认 我能运行ndd dm fdisk命令和工具 但是scandisk format常用dos命令都不能运行 5555~~~~
fdisk我不会用 不敢乱动 dm也不会用 （刚才看了介绍，好象没有什么用） ndd又读不过去 我确实很急的 但是我又不敢底格 害怕故障没有我想的那么严重 现在我真是不知所措！！！
Now I only know that the hard drive is not recognized. Now after booting from the boot disk, only C: can be accessed (just now I heard from the master that D: is a virtual area created by the boot disk). Although C:\> is displayed, any operation cannot be done, and it prompts that the C drive cannot be read. Other drives cannot be accessed either, and it prompts that they are not recognized. I can run NDD, DM, FDISK commands and tools, but common DOS commands like SCANDISK and FORMAT cannot be run. 5555~~~~
I don't know how to use FDISK and don't dare to move it randomly. DM is also not used. (Just now I read the introduction, it seems to be useless). NDD can't be read. I'm really in a hurry, but I don't dare to low-level format, afraid that the failure is not as serious as I thought. Now I'm really at a loss!!!
|
|
|
2003-5-7 00:00 |
|
|
lyq325
中级用户
积分 290
发帖 63
注册 2003-5-3
状态 离线
|
『第 44 楼』:
使用 LLM 解释/回答一下
找不到diskgen 华军上也没有下载的 ……惨了！！
Can't find diskgen. There's no download on Huajun... Sad!
|
|
|
2003-5-7 00:00 |
|
|
如是大师
元老会员
步行的人
积分 9654
发帖 3351
注册 2003-3-11
来自 湖北
状态 离线
|
『第 45 楼』:
使用 LLM 解释/回答一下
等等。。。。
|
弄花香满衣，掬水月在手。
明月鹭鸟飞， 芦花白马走。
我自一过后，野渡现横舟。
青云碧空在，净瓶水不流。
http://dos.e-stone.cn/guestbook/index.asp
＝＝＝＝＝＝中國DOS聯盟＝＝＝＝＝
我的新网页http://rsds.7i24.com欢迎光顾 |
|
|
2003-5-7 00:00 |
|
