|
cksdxz
新手上路
积分 4
发帖 2
注册 2005-12-4
来自 fj
状态 离线
|
『第 46 楼』:
使用 LLM 解释/回答一下
顶个撒。又学会一个东西啦。
Just making a comment. Learned another thing again.
|
|
 2005-12-4 17:09 |
|
|
wind198341
新手上路
积分 18
发帖 5
注册 2005-12-4
状态 离线
|
『第 47 楼』:
关于安装MS-DOS 7.10完整版的菜鸟疑问？
使用 LLM 解释/回答一下
问题的起因：我已经安装了WINXP-SP2系统(各个盘全是FAT32格式），想再加上一个DOS系统变成双系统。看到你们这个MS-DOS 7.10的介绍，说是可以直接在XP的基础上增加一个DOS系统，所以就下载了你们的软件，尝试了一下，但出现了2个问题：
1：我将你们给的MS-DOS 7.10光盘安装版刻成了CD光盘，而且可以正常启动进入DOS界面，但从光盘启动时没有提示我“是不是从CD-ROM启动”，而是直接就进入了DOS界面，不知道算不算问题？对系统没有影响吧？
2：进入DOS界面后，怎样操作才能将DOS安装到硬盘上得到双系统？（本人对DOS不熟悉）？
再详细点：就是如何操作才能看到这个界面？（我找了半天也没见到有什么“Setup"命令？只看到H盘里有一个MSDOS71.ISO文件。如果有，在哪里在？）
然后怎么就进入这个界面？
最后显示到这个界面。
可能是我太笨了，但真诚希望各位达人耐心解答！
Last edited by wind198341 on 2005-12-4 at 22:21 ]
Causes of the problem: I have installed the WINXP - SP2 system (all partitions are in FAT32 format), and I want to add a DOS system to make it a dual - system. After seeing your introduction of MS - DOS 7.10, which says it can directly add a DOS system on the basis of XP, so I downloaded your software and tried it, but two problems occurred:
1: I burned the CD installation version of MS - DOS 7.10 you gave into a CD, and I can normally boot into the DOS interface. But when booting from the CD, there is no prompt asking me "whether to boot from CD - ROM", but it directly enters the DOS interface. I don't know if this is a problem? Does it have no impact on the system?
2: After entering the DOS interface, how to operate to install DOS to the hard disk to get a dual - system? (I am not familiar with DOS)?
More detailed: That is, how to operate to see this interface? (I have been looking for a long time and didn't see any "Setup" command? I only saw an MSDOS71.ISO file in the H drive. If it exists, where is it?)
Then how to enter this interface?
Finally, it is displayed to this interface.
Maybe I am too stupid, but I sincerely hope that all experts can answer patiently!
Last edited by wind198341 on 2005-12-4 at 22:21 ]
|
|
|
2005-12-4 20:38 |
|
|
chujiafu
银牌会员
积分 1337
发帖 594
注册 2004-5-26
来自 安徽 宿州
状态 离线
|
『第 48 楼』:
使用 LLM 解释/回答一下
抱歉，我没有用过MS-DOS 7.10光盘完整安装版，无法给你回答。
Sorry, I haven't used the full installation version of MS-DOS 7.10 CD, so I can't answer you.
|
|
|
2005-12-6 10:14 |
|
|
gdxuzy
初级用户
积分 30
发帖 7
注册 2005-12-7
状态 离线
|
『第 49 楼』:
好东东,借用了.
使用 LLM 解释/回答一下
我很想请教一个问题.
就是笔记本的硬盘下下后,用转接卡,接到台式机后,如何回到本本后,能启动DOS.???
听着简单,但我做了次了.
本本是,富士通小本,无光软驱.但硬盘可以用转接卡接在台式机上.听\说,一定要在本本上分区才行.辛苦的是我,在台式机上分区了.所以,一直没法在本本上启动,玩完了,我的小本.QQ44808757
I really want to ask a question.
That is, after removing the hard disk of the notebook, using an adapter card and connecting it to the desktop, how to be able to boot into DOS when going back to the notebook.???
It sounds simple, but I did it once.
The notebook is a Fujitsu netbook, with no optical or floppy drive. But the hard disk can be connected to the desktop using an adapter card. I heard that it must be partitioned on the notebook. The hard part is that I partitioned it on the desktop. So, I have been unable to boot on the notebook, and my netbook is ruined. QQ44808757
|
|
|
2005-12-7 21:19 |
|
|
qzwqzw
银牌会员
天的白色影子
积分 2343
发帖 636
注册 2004-3-6
状态 离线
|
『第 50 楼』:
使用 LLM 解释/回答一下
软驱、光驱都没有吗？USB口呢？或者其他可启动设备的接口呢？
如果都没有，那肯定上了J商的当了。
另外，试过全分成FAT16或其他老格式的分区吗？
Are there no floppy drives or optical drives? What about USB ports? Or interfaces for other bootable devices?
If there are none, then you must have been scammed by a merchant.
Also, have you tried partitioning all into FAT16 or other old formats?
|
|
|
2005-12-8 20:51 |
|
|
xwgodxwgod
新手上路
积分 12
发帖 4
注册 2005-12-22
状态 离线
|
『第 51 楼』:
使用 LLM 解释/回答一下
我是C盘XP，D盘98，用这种办法和控制台修复的，进98都提示I/O错误
那个BOOT文件也生成了，2个盘都是FAT32
有什么办法？
I am C drive XP, D drive 98, and I fixed it with this method and the console. When entering 98, it prompts I/O error. The BOOT file is also generated. Both drives are FAT32. Is there any way?
|
|
|
2005-12-22 21:20 |
|
|
chujiafu
银牌会员
积分 1337
发帖 594
注册 2004-5-26
来自 安徽 宿州
状态 离线
|
『第 52 楼』:
使用 LLM 解释/回答一下
你是先装Xp后装的98，装完之后只能从98启动，不能从XP启动。你的问题是：如何恢复Win98和WinXP的双系统的启动菜单？建议你从网上找一下，到处都是此类问题的解决办法。要注意的是，你的C:盘是WinXP，D:盘是Win98.
You installed XP first and then 98. After installation, you can only boot from 98 and not from XP. Your question is: How to restore the dual-boot menu of Win98 and WinXP? It is suggested that you look for it online, as there are solutions to such problems everywhere. It should be noted that your C: drive is WinXP and D: drive is Win98.
|
|
|
2005-12-23 11:32 |
|
|
taoran
新手上路
积分 4
发帖 2
注册 2005-12-23
状态 离线
|
『第 53 楼』:
使用 LLM 解释/回答一下
我的是NTFS的，所以不好用了！
Mine is NTFS, so it doesn't work well!
|
|
|
2005-12-23 16:49 |
|
|
taoran
新手上路
积分 4
发帖 2
注册 2005-12-23
状态 离线
|
『第 54 楼』:
使用 LLM 解释/回答一下
有什么方法将C盘的NTFS格式（我在C盘装XP，在D盘装2000）改为FAT32格式呢？谢谢！盼复！
What methods are there to change the NTFS format of the C drive (I installed XP on the C drive and 2000 on the D drive) to the FAT32 format? Thanks! Looking forward to your reply!
|
|
|
2005-12-24 08:12 |
|
|
kong
新手上路
积分 4
发帖 2
注册 2005-12-24
状态 离线
|
『第 55 楼』:
hO
使用 LLM 解释/回答一下
Originally posted by chujiafu at 2005-8-30 18:30:
现在很多朋友都装了WinXP，它确实既快又稳定，但也带来不便，比如你想用Ghost进行克隆时，却不行，因为Ghost要求在纯Dos下才能运行。怎么办呢？有皠...
Originally posted by chujiafu at 2005-8-30 18:30:
Now many friends have installed WinXP. It is indeed fast and stable, but it also brings inconveniences. For example, when you want to use Ghost for cloning, it doesn't work because Ghost requires to run under pure DOS. What to do? There is...
|
|
|
2005-12-24 10:54 |
|
|
chujiafu
银牌会员
积分 1337
发帖 594
注册 2004-5-26
来自 安徽 宿州
状态 离线
|
『第 56 楼』:
使用 LLM 解释/回答一下
Originally posted by taoran at 2005-12-24 08:12 AM:
有什么方法将C盘的NTFS格式（我在C盘装XP，在D盘装2000）改为FAT32格式呢？谢谢！盼复！
用PqMagic 即可。
Originally posted by taoran at 2005-12-24 08:12 AM:
Is there any way to change the NTFS format of drive C (I installed XP on drive C and 2000 on drive D) to FAT32 format? Thanks! Looking forward to your reply!
Using PqMagic is okay.
|
|
|
2005-12-25 14:16 |
|
|
ilovery
新手上路
积分 18
发帖 5
注册 2005-12-13
状态 离线
|
『第 57 楼』:
使用 LLM 解释/回答一下
老大 你说的这个方法不行啊~~~害得我连XP都进不去了。直接就进DOS
其中你说的
4.Echo y|Bootpart winnt boot:c: （这一步是重新恢复Nt的启动内核，因为你用Sys a: c:把C: 盘原先的Nt的启动信息覆盖了，如果不进行这一步的话，从硬盘启动就变成纯Dos了。）
我用了 提示 command bad 郁闷~~~恢复不过来 只好重做系统了
顺便问下 vfloppy 虚拟的 不是纯DOS吗 原来我问过 有的人说是纯的
Boss, the method you mentioned doesn't work~~~ It made me unable to even boot into XP. It directly boots into DOS.
Among what you said:
4. Echo y|Bootpart winnt boot:c: (This step is to re - restore the boot kernel of Nt, because you used Sys a: c: to overwrite the original boot information of Nt on the C: drive. If this step is not carried out, booting from the hard disk will become pure DOS.)
I used it and it prompted command bad. It's depressing~~~ Can't recover it. I have to reinstall the system.
By the way, vfloppy is virtual, isn't it pure DOS? Originally I asked, some people said it was pure.
|
|
|
2005-12-27 23:13 |
|
|
chenyy
初级用户
积分 143
发帖 49
注册 2005-11-28
状态 离线
|
|
|
2005-12-28 10:06 |
|
|
XHR
新手上路
积分 4
发帖 2
注册 2006-1-8
状态 离线
|
『第 59 楼』:
使用 LLM 解释/回答一下
直接安装纯DOS不可以么？
Can't we just install pure DOS directly?
|
|
|
2006-1-8 02:33 |
|
|
XHR
新手上路
积分 4
发帖 2
注册 2006-1-8
状态 离线
|
『第 60 楼』:
使用 LLM 解释/回答一下
我是直接下了DOS7.0版本，然后直接用虚拟光驱打开这个ISO文件，将ISO里的DOS目录全部剪贴到C盘。然后用启动盘进入DOS，运行setup.bat就安装完了！
I directly downloaded the DOS 7.0 version, then used a virtual drive to open this ISO file, and cut and pasted all the DOS directories in the ISO to the C drive. Then I booted into DOS with a boot disk and ran setup.bat to complete the installation!
|
|
|
2006-1-8 03:46 |
|
