|
henryhoo
新手上路

积分 10
发帖 4
注册 2006-8-3 来自 中山
状态 离线
|
|
2006-8-3 08:50 |
|
|
Stone1217
新手上路

积分 6
发帖 3
注册 2006-8-9
状态 离线
|
『第 272 楼』:
使用 LLM 解释/回答一下
请问站长,我用WinImage将下载的MS-DOS 7.10的完整安装版下载(软盘版)释放到D:\MS-DOS(fat32)然后用光盘启动dos运行D:\MS-DOS\setup,安装到c:\ms-dos目录中,当进行到选择两张盘一起安装和只安装DISK 1时不知用哪个键切换,我就一路OK或YES,后提示找不到C盘,安装失败,请问什么原因,ASUS A6笔记本,60G硬盘,分区(C:D:E:F:)FAT32 G:NTFS,用win XP系统,C盘正常,光驱H:光盘驱动DOS后提示符为A:>。注:用此光盘启动装有软驱的台式机,无法使用软驱,找不到驱动器,是否光盘DOS有问题?
Excuse me, webmaster. I used WinImage to extract the downloaded full installation version of MS-DOS 7.10 (floppy disk version) to D:\MS-DOS (fat32) and then used the CD to boot into DOS and ran D:\MS-DOS\setup to install it to the c:\ms-dos directory. When it came to choosing to install both disks together and only installing DISK 1, I didn't know which key to use to switch, so I just kept pressing OK or YES. Then it prompted that the C drive was not found and the installation failed. What's the reason? It's an ASUS A6 notebook, a 60G hard disk, partitions (C: D: E: F:) FAT32, G: NTFS, using the win XP system, the C drive is normal, the CD drive H: After booting DOS from the CD, the prompt is A:>. Note: When using this CD to boot a desktop with a floppy drive, the floppy drive cannot be used and the drive cannot be found. Is there a problem with the CD DOS?
|
|
2006-8-9 14:29 |
|
|
Stone1217
新手上路

积分 6
发帖 3
注册 2006-8-9
状态 离线
|
『第 273 楼』:
使用 LLM 解释/回答一下
在xp中修改boot.ini 不用那么麻烦,右击My computer 选择propertis选择Advanced点击Startup and Recovery项的settings,然后单击Edit即可对boot.ini进行编辑
In XP, modifying boot.ini is not that complicated. Right - click My computer, select propertis, select Advanced, click the settings of Startup and Recovery item, and then click Edit to edit boot.ini.
|
|
2006-8-9 14:40 |
|
|
awen162
新手上路

积分 16
发帖 8
注册 2006-8-1
状态 离线
|
|
2006-8-9 22:18 |
|
|
hyfei2006
新手上路

积分 6
发帖 3
注册 2006-8-13
状态 离线
|
|
2006-8-14 15:26 |
|
|
anqing
高级用户
   
积分 859
发帖 413
注册 2006-8-14
状态 离线
|
『第 276 楼』:
使用 LLM 解释/回答一下
Originally posted by Wengier at 2003-10-15 00:00:
不是说过可以直接将IMG文件解开到硬盘就可以从硬盘进行安装吗?
]
]
DOS71.IMG把它解开到硬盘上,双击里面的setup.bat就可以硬盘安装了吗?
它和DOS71CD.iso光盘刻录在功能上,有什么分别,能差什么,多少?
Originally posted by Wengier at 2003-10-15 00:00:
Didn't I say that you can directly extract the IMG file to the hard disk and then install from the hard disk?
]
]
If you extract DOS71.IMG to the hard disk and double-click the setup.bat inside, can you install it from the hard disk? What are the differences in functions between it and DOS71CD.iso for burning to a CD, and what are the differences and how much?
|
|
2006-8-15 12:02 |
|
|
Stone1217
新手上路

积分 6
发帖 3
注册 2006-8-9
状态 离线
|
『第 277 楼』:
使用 LLM 解释/回答一下
经过几次尝试终于安装成功,原来问题主要是安装到一半是显示找不到c盘,后将c盘删除,重新分区后可以了,分了c:800M 作为dos 分区,d:10G为winXP系统盘
谢谢站长的平台
After several attempts, it was finally installed successfully. Originally, the main problem was that when installing halfway, it showed that the C drive was not found. Then, I deleted the C drive, re-partitioned, and it worked. I divided C: 800M as the DOS partition and D: 10G as the Windows XP system drive. Thanks to the webmaster's platform
|
|
2006-8-16 03:13 |
|
|
jmm988
初级用户
 
积分 37
发帖 18
注册 2006-5-13
状态 离线
|
『第 278 楼』:
使用 LLM 解释/回答一下
曾经完全安装过,只是用起来有眼花缭乱的感觉,不方便!这次部分安装再试试!谢谢!
I have completely installed it before, but it feels confusing to use and is not convenient! I'll try partial installation this time! Thanks!
|
|
2006-8-17 06:40 |
|
|
klongyun
新手上路

积分 6
发帖 3
注册 2006-1-9
状态 离线
|
|
2006-9-2 22:17 |
|
|
itjxh
新手上路

积分 2
发帖 1
注册 2006-10-8 来自 江西
状态 离线
|
『第 280 楼』:
使用 LLM 解释/回答一下
为什么没有硬盘安装版,这样的话没有光软驱的也可以安装了
Why is there no hard disk installation version? In this way, those without optical or floppy drives can also install it.
|
|
2006-10-10 23:08 |
|
|
mxl800
初级用户
 
积分 22
发帖 10
注册 2006-10-11
状态 离线
|
『第 281 楼』:
使用 LLM 解释/回答一下
楼主还会不会回来看这个帖子呀?!
求楼主的帮助呀!
我把下下来的软盘安装版解压缩到硬盘上,然后用在网上下的一个U盘启动工具作了一个启动U盘,然后用这个U盘启动电脑进入纯DOS结果U盘变成C盘了,原来的C盘变成D盘了,这样一来安装MS-DOS7.10时,引导信息被写入了U盘,没办法从硬盘启动DOS。
请问楼主怎么解决这个问题呀??
Will the LZ still come back to look at this post?!
Asking for the LZ's help!
I extracted the floppy disk installation version I downloaded to the hard disk, then used a USB flash drive boot tool downloaded online to make a boot USB flash drive. Then I used this USB flash drive to boot the computer into pure DOS and the USB flash drive became drive C, and the original drive C became drive D. In this way, when installing MS-DOS 7.10, the boot information was written to the USB flash drive, and I can't boot DOS from the hard disk.
May I ask how the LZ solves this problem??
|
|
2006-10-12 02:50 |
|
|
xxddljj
初级用户
 
积分 28
发帖 14
注册 2006-6-23
状态 离线
|
『第 282 楼』:
使用 LLM 解释/回答一下
好呀,楼主,是不是下载了做成启动盘就行了?
Okay, the landlord, is it just that you download it and make it into a bootable disk?
|
|
2006-10-15 22:33 |
|
|
雨露
管理员
          DOS非常爱好者
积分 6209
发帖 2598
注册 2006-1-20
状态 离线
|
『第 283 楼』:
使用 LLM 解释/回答一下
这个贴子好长,应该不会有人全部看完,所以就有人反复问同一问题,建议楼主将主要的问题解答放在第一楼!
This post is quite long, and no one is likely to read it all, so some people repeatedly ask the same question. It is suggested that the LZ (楼主) put the main question answers in the first floor!
|

|
|
2006-10-15 23:00 |
|
|
mxhchtp
新手上路

积分 5
发帖 3
注册 2006-10-17
状态 离线
|
『第 284 楼』:
使用 LLM 解释/回答一下
非常感谢,学习之中。
Thanks a lot. In the process of learning.
|
|
2006-10-17 22:17 |
|
|
weiwei123
初级用户
 
积分 41
发帖 22
注册 2006-4-9 来自 hn
状态 离线
|
|
2006-10-18 21:14 |
|