Ask how to solve "program too big to fix in memory", the translation is: Asking how to solve "program too big to fix in memory" - China DOS Union Forum

After installing MS Network Client 3.0, the memory screen when running MEM is as follows:
memtype total= used + free
conventional 640K 261K 379k
upper 155k 155k 0
reserved 384k 384k 0
extended(XMS) 56165k 3706k 52459k

total 57344k 4506k 52838k
total under 1m 795k 416k 579k

The configuration of the config.sys file is as follows:
DEVICE=C:\DOS\SETVER.EXE
DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE NOEMS
DOS=HIGH,UMB
FILES=40
BUFFERS=40
DEVICEHIGH=C:\DOS\RAMDRIVE.SYS 2048 /E
device=C:\NET\ifshlp.sys
LASTDRIVE=Z

The configuration of the autoexec.bat file is as follows:
C:\NET\net initialize
call chkramd.bat

C:\DOS\SMARTDRV.EXE /X 150
@ECHO OFF
PROMPT $p$g
PATH C:\NET;C:\;C:\DOS;C:\UTTF
SET TEMP=C:\DOS
CALL C:\TR-518FC\DYNA
C:\NET\netbind.com
C:\NET\umb.com
C:\NET\tcptsr.exe
C:\NET\tinyrfc.exe
C:\NET\nmtsr.exe
C:\NET\emsbfr.exe
C:\NET\net start
c:\tr-518fc
ict

As soon as the last software (ICT) in the autoexec.bat file is run, the error prompt "program too big to fix in memory" appears. Other software cannot run normally.
Please help from the experts.
Thank you!!!

Floor1　tottia	Posted 2006-08-25 13:07
初级用户　Posts 10　Credits 36
After installing MS Network Client 3.0, the memory screen when running MEM is as follows: memtype total= used + free conventional 640K 261K 379k upper 155k 155k 0 reserved 384k 384k 0 extended(XMS) 56165k 3706k 52459k total 57344k 4506k 52838k total under 1m 795k 416k 579k The configuration of the config.sys file is as follows: DEVICE=C:\DOS\SETVER.EXE DEVICE=C:\DOS\HIMEM.SYS DEVICE=C:\DOS\EMM386.EXE NOEMS DOS=HIGH,UMB FILES=40 BUFFERS=40 DEVICEHIGH=C:\DOS\RAMDRIVE.SYS 2048 /E device=C:\NET\ifshlp.sys LASTDRIVE=Z The configuration of the autoexec.bat file is as follows: C:\NET\net initialize call chkramd.bat C:\DOS\SMARTDRV.EXE /X 150 @ECHO OFF PROMPT $p$g PATH C:\NET;C:\;C:\DOS;C:\UTTF SET TEMP=C:\DOS CALL C:\TR-518FC\DYNA C:\NET\netbind.com C:\NET\umb.com C:\NET\tcptsr.exe C:\NET\tinyrfc.exe C:\NET\nmtsr.exe C:\NET\emsbfr.exe C:\NET\net start c:\tr-518fc ict As soon as the last software (ICT) in the autoexec.bat file is run, the error prompt "program too big to fix in memory" appears. Other software cannot run normally. Please help from the experts. Thank you!!!

Floor2　Kinglion	Posted 2006-08-28 23:51
铂金会员　Posts 1,924　Credits 5,798　From 金獅電腦軟體工作室
I'm not sure in which language this ICT program is written. If you can ensure that this file runs normally on other machines but can't start on the current machine, try optimizing memory management with MEMMAKER.EXE and then try again. Or try running it without loading the network driver first to see if the problem still exists. You can first consider not loading the following program: DEVICEHIGH=C:\DOS\RAMDRIVE.SYS 2048 /E

Floor3　tottia	Posted 2006-08-29 11:51
初级用户　Posts 10　Credits 36
It has been found out that it is because a Chinese font library called DNYA was loaded. Once this font library is loaded, the memory will be exhausted. I don't know if you have heard of this Chinese font library. I don't know if it can be replaced.