China DOS Union

MS-DOS 7.10 Installation CD Menu
MS-DOS 7.10 安装CD 菜单
(1)Install MS-DOS 7.10 [enter]
(1)安装MS-DOS 7.10 [enter]
(2)Boot from Floppy Drive
(2)从软驱启动
(3)Boot from Hard Drive
(3)从硬盘启动
(4)Restart the system
(4)重新启动系统
Hit the key of choice:
击中选择的键:


MS-DOS 7.10 Setup
MS-DOS 7.10 安装
Welcome to MS-DOS 7.10 Setup.
欢迎安装MS-DOS 7.10 .
This wizard will help you to install MS-DOS 7.10 onto your system.
这个向导将帮助你在你的系统之上安装MS-DOS 7.10.
Please click "Next" to continue, or click "Cancel" to close this wizard.
请单击 "下一步" 继续,或单击 "取消" 关闭向导.


MS-DOS is the most widely-used and useful DOS today.
MS-DOS 是现在使用最广泛的DOS系统.
It fully supports large hard disks, FAT12/16/32 drives, Long File Names (LFN), large memory, Windows GUI, etc.
它完全支持大硬盘,FAT12/16/32文件系统,长文件名 (LFN), 大内存,WindowsGUI,等等.
MS-DOS 7.10 will provide you with a lot of new features, and you will gain a lot of new experiences.
MS-DOS 7.10 将向你提供很多新特性,你将获得很多新的体验.
Note:Don't install it if the primary partition of your hard drives is an NTFS/HPES or Ext partition.
注意:如果你的硬盘的主分区是NTFS/HPFS 或Ext partition请不要安装它.


Before you continue, you must obey the following licence:
在你继续以前,你必须服从下列许可:
This program is Free Software under GNU GPL.
本程序是基于GNU GPL 的自由软件.
This program may be used freely, and you are welcome to redistribute it under certain conditions.
可以免费使用本程序, 并且在肯定的条件下面再分配它.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the MS-DOS License Agreement for more details.You should have received a copy of the MS-DOS 7.10 License Agreement along with this program;
see the file LICENSE.TXT for more info.If not, please contact Support Center.


MS-DOS 7.10 will now check the partitions on your hard drives.
MS-DOS 7.10 现在将检查你的硬盘上的分区.
This can help you to set up your hard drives and so forth automatically if not done properly yet.
这能帮助你设置你的硬盘驱动器.
Thus it's strongly recommended NOT to skip this step.
强烈建议不要跳过这步骤.
Please click "Continue" to continue.
请单击 "继续" 继续.
However, if you encounter some problem while it's checking your partitions, please click "Skip"
然而,如果在检查分区时遇见一些问题,请单击 "跳过"


Rewriting Master Boot Record (MBR) of your hard drive will ensure that the MBR code is correct.
重写硬盘主引导记录 (MBR) 将确保MBR 代码是正确的.
However, if youhave already installed a special boot loader(such as GNU GRUB) in MBR, it will be overwritten.
然而,如果你已经在MBR中安装了一个启动管理器(例如GNU GRUB) ,它将被覆盖.
Do you want to rewrite the MBR code?
你想要重写MBR 代码吗?


Setup will install MS-DOS 7.10 in the following path:
安装程序将要在下列路径安装MS-DOS 7.10:
To install to a different path, please change it.
要在一不同的路径安装,请更改它.
Destination (full path):
目标 (完整路径):


The directory "C:\DOS71" doesn't exist, do you want to create it?
目录 "C:\DOS71" 不存在,你想要创建它吗?


There are three installation types to install MS-DOS 7.10:
有3个安装选项用于安装MS-DOS 7.10:
Full installation (2 Disks)
完全安装
DOS commands only (1 Disks)
只安装DOS
Minimal DOS system (1 Disks)
最小的DOS系统

Install Add-Ons
安装附件:
Note: If you don't want to install Add-Ons for MS-DOS 7.10 now, please uncheck the "Install Add-Ons" box.
注意：如果你现在不想安装附件到MS-DOS 7.10, 请取消 "安装附件"选项.


You have chosen Full Installation in the previous menu.
你在前面的菜单选择了完全安装.
Some useful tools and utilities, such as ScanDisk, CVT, DOSShell, MemMaker, and MS-DOS help, will be installed on your system.
一些常用的工具和实用程序,例如磁盘扫描程序,CVT,DOSShell, MemMaker以及MS-DOS 帮助,将会安装在你的电脑里.
AccessDOS is a DOS extension included in MS-DOS 7.10 Setup Disk which provides additional flexibility in the user-interface for DOS, and which are useful to individuals both with and without disabilities.
AccessDOS 是MS-DOS 7.10 安装盘内置的扩展,它在DOS里提供具有灵活性的使用界面，它是一个很有用的工具.
This extension allows the user to control the key repeat, to adjust the way the keys on the keyboard respond when pressed, to make all modifier keys into locking keys (something like the Caps Lock key),to control the mouse cursor with precision from the
这扩展允许使用者控制按键,调整按键在键盘上的路径把任何键转换为另一个按键 (象Caps Lock),或在键盘上精确地控制鼠标，
keyboard, and to obtain a visual indication of beeps or other sounds made by the computer.
而且还会让计算机发出哔哔声或另外的音效进行指示.
After you install AccessDOS, type "ADOS" to start it from DOS.
在你安装AccessDOS 以后,键入 "ADOS" 在DOS中启动它.
Would you like to install AccessDOS?
你想安装AccessDOS 吗?


Setup will install MS-DOS 7.10 to the following path:C:\DOS71
安装程序将安装MS-DOS 7.10到以下路径:C:\DOS71
Installation type:Full installation :
安装类型：完全安装
Install AccessDOS:yes
安装AccessDOS：是
Install Add-Ons:yes
安装附件:是
Click "OK" to start the installation.
按 "确定" 开始安装.
If you want to make some changes, please click "Change".
如果你想改变一些选项,请单击 "更改".


MS-DOS 7.10 Add-On Setup
MS-DOS 7.10附件安装
Welcome to MS-DOS 7.10 Add-On Setup.
欢迎进入MS-DOS 7.10附件安装。
With this feature, you can install Add-Ons or plug-ins for MS-DOS 7.10 easily.
现在你能很容易地安装附件或插件到MS-DOS 7.10.
Add-Ons or plug-ins can make MS-DOS 7.10 much more powerful and easier to use.
附件或插件能使MS-DOS 7.10 更强大并且易用.
If you don't want to install Add-Ons now, please click "Cancel".
如果你现在不想安装,请单击 "取消".


MS-DOS 7.10 Setup will install the following Add-On:
MS-DOS 7.10 安装程序将要安装下列附件:
Name:ADDPACK
名称:ADDPACK
Version:1.0
版本:1.0
Description:Add-On Packs for MS-DOS 7.10 Setup Using the following ZIP package as the source:
说明:附件来源于以下ZIP压缩包:
D:\dos71\addons\autorun\DOS71ADD.ZIP
Do you want to install this Add-On now?
你想要现在安装它吗?


MS-DOS 7.10 Setup will install the following Add-On:
MS-DOS 7.10 安装程序将要安装下列附件:
Name:MMPACK
名称:MMPACK
Version:1.01.0
版本:
Description:MultiMedia Pack for MS-DOS 7.10 Setup Using the following ZIP package as the source:
说明:附件来源于以下ZIP压缩包:
D:\dos71\addons\autorun\..\mmedia\MMPACK.ZIP
Do you want to install this Add-On now?
你想要现在安装它吗?

Do you want to install drives for your sound cards?
你想要为你的声卡安装驱动器吗?


MS-DOS 7.10 Setup will install the following Add-On:
MS-DOS 7.10 安装程序将要安装下列附件:
Name:SNDDRV
名称:SNDDRV
Version:1.0
版本:1.0
Description:Sound Drivers for MS-DOS 7.10 Setup Using the following ZIP package as the source:
说明:附件来源于以下ZIP压缩包:
D:\dos71\addons\autorun\..\mmedia\snddrv\SNDDRV.ZIP
Do you want to install this Add-On now?
你想要现在安装它吗?


please choose your sound card:(Some drivers are untested yet)
请选择你的声卡:(一些驱动程序还是未经检测的)
Sound Blaster AWE PnP
Sound Blaster PCI
Sound Blaster Live!
ESS ISA 688/1688 VIA
AC97 C-Media AC97
No sound card or none of above
没有声卡或不是上面的类型


MS-DOS 7.10 Setup will install the following Add-On:
MS-DOS 7.10 安装程序将要安装下列附件:
Name:QV246
名称:QV246
Version:1.0
版本:1.0
Description:QuickView Pro 2.46 Add-On for MS-DOS 7.10 Setup Using the following ZIP package as the source:
说明:附件来源于以下ZIP压缩包:
D:\dos71\addons\autorun\..\mmedia\sndprg\qv\QVPRO.ZIP
Do you want to install this Add-On now?
你想要现在安装它吗?

QuickView Pro 2.46 Add-On has been installed.
附件QuickView Pro 2.46 已经安装

MS-DOS 7.10 Setup will install the following Add-On:
MS-DOS 7.10 安装程序将要安装下列附件:
Name:MPXP147
名称:MPXP147
Version:1.0
版本:1.0
Description:MPXPLAY 1.47 Add-On for MS-DOS 7.10 Setup Using the following ZIP package as the source:
说明:附件来源于以下ZIP压缩包:
D:\dos71\addons\autorun\..\mmedia\sndprg\mpxplay\MPXPLAY.ZIP
Do you want to install this Add-On now?
你想要现在安装它吗?

MPXPLAY 1.47 Add-On has been installed.
附件MPXPLAY 1.47已经安装.


MS-DOS 7.10 Setup will install the following Add-On:
MS-DOS 7.10 安装程序将要安装下列附件:
Name:CDP
名称:CDP
Version:1.0
版本:1.0
Description:CDP Add-On for MS-DOS 7.10 Setup Using the following ZIP package as the source:
说明:附件来源于以下ZIP压缩包:
D:\dos71\addons\autorun\..\mmedia\sndprg\cdp\CDP.ZIP
Do you want to install this Add-On now?
你想要现在安装它吗?


CDP Add-On has been installed.
附件CDP已经安装.

MS-DOS 7.10 Setup will install the following Add-On:
MS-DOS 7.10 setup will install the following add-ons:
Name:SYSTOOLS
Name: SYSTOOLS
Version:1.0
Version: 1.0
Description:System Tools Add-On for MS-DOS 7.10 Setup Using the following ZIP package as the source:
Description: System tools add-on for MS-DOS 7.10 setup, using the following ZIP package as the source:
D:\dos71\addons\autorun\..\system\SYSTEM.ZIP
D:\dos71\addons\autorun\..\system\SYSTEM.ZIP
Do you want to install this Add-On now
Do you want to install this add-on now?

MS-DOS 7.10 Setup will install the following Add-On:
MS-DOS 7.10 setup will install the following add-ons:
Name:MSAV
Name: MSAV
Version:1.0
Version: 1.0
Description:Microsoft Anti-Virus Add-On for MS-DOS 7.10 Setup Using the following ZIP package as the source:
Description: Microsoft anti-virus add-on for MS-DOS 7.10 setup, using the following ZIP package as the source:
D:\dos71\addons\autorun\..\system\msav\MSAV.ZIP
D:\dos71\addons\autorun\..\system\msav\MSAV.ZIP
Do you want to install this Add-On now?
Do you want to install this add-on now?

MSAV Add-On has been installed.
MSAV add-on has been installed.
Type MSAV from DOS to start.
Type MSAV from DOS to start.


MS-DOS 7.10 Setup will install the following Add-On:
MS-DOS 7.10 setup will install the following add-ons:
Name:MSBACKUP
Name: MSBACKUP
Version:1.0
Version: 1.0
Description:Microsoft Backup Add-On for MS-DOS 7.10 Setup Using the following ZIP package as the source:
Description: Microsoft backup add-on for MS-DOS 7.10 setup, using the following ZIP package as the source:
D:\dos71\addons\autorun\..\system\msbackup\MSBACKUP.ZIP
D:\dos71\addons\autorun\..\system\msbackup\MSBACKUP.ZIP
Do you want to install this Add-On now?
Do you want to install this add-on now?

MSBACKUP Add-On has been installed.
MSBACKUP add-on has been installed.
Type MSBACKUP from DOS to start.
Type MSBACKUP from DOS to start.


MS-DOS 7.10 Setup will install the following Add-On:
MS-DOS 7.10 setup will install the following add-ons:
Name:NORTON
Name: NORTON
Version:1.0
Version: 1.0
Description:Norton Utilities Add-On for MS-DOS 7.10 Setup Using the following ZIP package as the source:
Description: Norton Utilities add-on for MS-DOS 7.10 setup, using the following ZIP package as the source:
D:\dos71\addons\autorn\..\system\norton\NORTON.ZIP
D:\dos71\addons\autorn\..\system\norton\NORTON.ZIP
Do you want to install this Add-On now?
Do you want to install this add-on now?

Norton Utilities (DISKEDIT, NDD, UNERASE, etc) Add-On has been installed.
Norton Utilities (DISKEDIT, NDD, UNERASE, etc.) add-on has been installed.


MS-DOS 7.10 Setup will install the following Add-On:
MS-DOS 7.10 setup will install the following add-ons:
Name:FILEMAN
Name: FILEMAN
Version:1.0
Version: 1.0
Description:File Manager Add-On for MS-DOS 7.10 Setup Using the following ZIP package as the source:
Description: File manager add-on for MS-DOS 7.10 setup, using the following ZIP package as the source:
D:\dos71\addons\autorn\..\fileman\FILEMAN.ZIP
D:\dos71\addons\autorn\..\fileman\FILEMAN.ZIP
Do you want to install this Add-On now?
Do you want to install this add-on now?

MS-DOS 7.10 Setup will install the following Add-On:
MS-DOS 7.10 setup will install the following add-ons:
Name:VC499
Name: VC499
Version:1.0
Version: 1.0
Description:Volkov Commander 4.99 Add-On for MS-DOS 7.10 Setup Using the following ZIP package as the source:
Description: Volkov Commander 4.99 add-on for MS-DOS 7.10 setup, using the following ZIP package as the source:
D:\dos71\addons\autorn\..\fileman\vc\VC.ZIP
D:\dos71\addons\autorn\..\fileman\vc\VC.ZIP
Do you want to install this Add-On now?
Do you want to install this add-on now?

Volkov Commander 4.99 Add-On has been installed.
Volkov Commander 4.99 add-on has been installed.
Autorun each time?
Run automatically each time?


MS-DOS 7.10 Setup will install the following Add-On:
MS-DOS 7.10 setup will install the following add-ons:
Name:GVFM
Name: GVFM
Version:1.0
Version: 1.0
Description:Graphics Vision File Manager Add-On for MS-DOS 7.10 Setup Using the following ZIP package as the source:
Description: Graphics Vision file manager add-on for MS-DOS 7.10 setup, using the following ZIP package as the source:
D:\dos71\addons\autorn\..\fileman\gvfm\GVFM.ZIP
D:\dos71\addons\autorn\..\fileman\gvfm\GVFM.ZIP
Do you want to install this Add-On now?
Do you want to install this add-on now?

Graphics Vision File Manager Add-On has been installed.
Graphics Vision file manager add-on has been installed.
Autorun each time?
Run automatically each time?


MS-DOS 7.10 Setup will install the following Add-On:
MS-DOS 7.10 setup will install the following add-ons:
Name:CHISYS
Name: CHISYS
Version:1.0
Version: 1.0
Description:Chinese Add-On for MS-DOS 7.10 Setup Using the following ZIP package as the source:
Description: Chinese add-on for MS-DOS 7.10 setup, using the following ZIP package as the source:
D:\dos71\addons\autorn\..\chisys\CDOS.ZIP
D:\dos71\addons\autorn\..\chisys\CDOS.ZIP
Do you want to install this Add-On now?
Do you want to install this add-on now?

Relly want to install Chinese Add-Ons for MS-DOS 7.10?
Really want to install Chinese add-ons for MS-DOS 7.10?


Do you want to install another Add-On for MS-DOS 7.10 now?
Do you want to install another add-on for MS-DOS 7.10 now?


Please insert the MS-DOS 7.10 Add-On Disk to the following path, and click "Continue".
Please insert the MS-DOS 7.10 add-on disk to the following path and click "Continue".
If you want to cancel and don't install Add-On for Setup, please click "Cancel".
If you want to cancel and not install the add-on for setup, please click "Cancel".


This Add-On might be already installed.
This add-on might already be installed.
Do you want to reinstall or update it?
Do you want to reinstall or update it?


If you want to start MS-DOS 7.10 Add-On Setup next time, you must run MS-DOS 7.10 Setup again. Do you really want to quit from MS-DOS 7.10 Add-On Setup now?
If you want to start the MS-DOS 7.10 add-on setup next time, you must run the MS-DOS 7.10 setup again. Do you really want to quit the MS-DOS 7.10 add-on setup now?


By default, the system will show MS-DOS 7.10 Startup Logo when MS-DOS 7.10 starts.
By default, the system will display the MS-DOS 7.10 startup logo when MS-DOS 7.10 starts.
But you can disable it now.
But you can disable it now.
If you answer "Yes"
If you answer "Yes"
you can always press the ESC key to disable it temporarily when it appears during DOS startup.
you can always press the ESC key to temporarily disable it when it appears during DOS startup.
Would you like the DOS Startup Logo to be shown?
Would you like the DOS startup logo to be shown?


MS-DOS 7.10 could create a DOS startup log file BOOTLOG.TXT, which can sometimes provide some useful information for troubleshooting or so.
MS-DOS 7.10 could create a DOS startup log file BOOTLOG.TXT, which can sometimes provide some useful information for troubleshooting and so on.
On the other hand, however, it may slow down the boot up procedure.
On the other hand, however, it may slow down the boot-up procedure.
Do you want to enable this DOS startup log function?
Do you want to enable this DOS startup log function?


Some older DOS programs which don't support Long File Names(LFN) may destroy LFN and cause data loss while making write access to drives directly.
Some older DOS programs that don't support long file names (LFN) may destroy LFN and cause data loss when making direct write access to drives.
Thus by default, MS-DOS 7.10 disables direct disk write access by unlocking all drives in order to protect LFNs and data on your system.
Thus, by default, MS-DOS 7.10 disables direct disk write access by unlocking all drives to protect LFNs and data on your system.
However, certain special programs sometimes may need to write to the drives directly without causing LFN loss(for example, when Windows 3.x is attempting to create a *permanent* swap file).
However, certain special programs sometimes may need to write directly to the drives without causing LFN loss (for example, when Windows 3.x is attempting to create a *permanent* swap file).
Do you want MS-DOS 7.10 to enable direct disk write access for these programs by locking the drives automatically?
Do you want MS-DOS 7.10 to enable direct disk write access for these programs by automatically locking the drives?
Note:you can get more information about this and the usage of the LOCK command by typing "LOCK /?" on the DOS command line.
Note: You can get more information about this and the usage of the LOCK command by typing "LOCK /?" on the DOS command line.


EMM386 can provide access to Upper Memory Block(UMB) and use extended memory(XMS) to simulate expanded memory(EMS).If UMB memory is enabled, the DOS kernel, DOS programs and device drivers can be loaded high to save the 640KB low memory.
EMM386 can provide access to upper memory block (UMB) and use extended memory (XMS) to simulate expanded memory (EMS). If UMB memory is enabled, the DOS kernel, DOS programs, and device drivers can be loaded high to save the 640KB low memory.
EMS memory is needed by certain programs, such as some older games.
EMS memory is needed by certain programs, such as some older games.
However, if you enable both UMB and EMS memory, then the total available UMB memory will be reduced by 64KB, so it's not recommended to enable EMS memory unless it's required.
However, if you enable both UMB and EMS memory, then the total available UMB memory will be reduced by about 64KB, so it's not recommended to enable EMS memory unless it's required.
Also, EMM386 will provide VCPI memory and switch DOS into the protected and V86 mode automatically.
Also, EMM386 will automatically provide VCPI memory and switch DOS into protected and V86 mode.
However, certain DOS programs may not be compatible with EMM386.If this is the case, please don't load EMM386.
However, certain DOS programs may not be compatible with EMM386. If this is the case, please don't load EMM386.
Do you want to enable UMB and/or EMS memory by loading EMM386?
Do you want to enable UMB and/or EMS memory by loading EMM386?


Most people have at least one IDE CD-ROM/RW or DVD-ROM/RW drive on their systems.
Most people have at least one IDE CD-ROM/RW or DVD-ROM/RW drive on their systems.
To access a CD/DVD drive, the corresponding CD/DVD driver for CD/DVD drivers and MSCDEX.EXE when DOS starts.
To access a CD/DVD drive, the corresponding CD/DVD driver for CD/DVD drives and MSCDEX.EXE when DOS starts.
If you have another type of CD/DVD drive (e.g.SCSI or USB CD), then you may need to load a different CD/DVD driver in CONFIG.SYS and/or AUTOEXEC.BAT to make that CD/DVD drive work correctly.
If you have another type of CD/DVD drive (e.g., SCSI or USB CD), then you may need to load a different CD/DVD driver in CONFIG.SYS and/or AUTOEXEC.BAT to make that CD/DVD drive work correctly.
Do you want MS-DOS 7.10 to load the IDE CD/DVD .SYS driver and the CD/DVD extension (MSCDEX.EXE) automatically when DOS starts?
Do you want MS-DOS 7.10 to automatically load the IDE CD/DVD .SYS driver and the CD/DVD extension (MSCDEX.EXE) when DOS starts?
Note:
Note:
If you are not sure about this, please click "Load both".
If you are not sure about this, please click "Load both".

With this, you can configure MS-DOS 7.10 easily.
至此,你可以很容易地设置MS-DOS 7.10.
Please check the programs you want to load when MS-DOS 7.10 starts.
请检查你想要加载的程序,当MS-DOS 7.10 启动时.
SHARE (File - sharing and locking capabilities)
共享 (文件共享和锁定能力)
POWER (Advanced power management)
电源 (电源管理)
DOSLFN (Long File Names support)
DOSLFN (长文件名支持)
CTMOUSE (PS/2 & serial mouse support)
CTMOUSE (PS/2&串行鼠标支持)
NLSFUNC (For CHCP to switch code page)
NLSFUNC (为到交换码页的CHCP)
SMARTDRV (Disk cache to speed the drives up)
SMARTDRV (磁盘缓冲加速驱动器起来)
Note:If you want to change these settings later, please modify the file CONFIG.SYS and/or AUTOEXEC.BAT manually.
注意:如果你想要晚些更改这些设置,请手工修改文件CONFIG.SYS 或AUTOEXEC.BAT.


MS-DOS 7.10 needs to know what code page you are using in order to provide LFN, display and keyboard support, and other country - specify information for itself and some programs.
MS-DOS 7.10 需要知道你使用的代码页以便提供LFN 的,显示和键盘支持,其它为自己国家指定信息,一些程序.
Code Page 437 (US International)
代码页437 (美国国际)
Code Page 850 (Multilingual/Latin Ⅰ, with Euro sign)
代码页850 (Multilingual/Latin Ⅰ, 与Euro 符号)
Code Page 852 (Slavic/Latin Ⅱ)
代码页852 (Slavic/Latin Ⅱ)
Code Page 863 (Canadian - French)
代码页863 (加拿大人法语)
Code Page 866 (Russian/Cyrillic)
代码页866 (Russian/Cyrillic)
Code Page 869 (Greek)
代码页869 (希腊)
Code Page 936 (Simplified Chinese)
代码页936 (简体中文)
Code Page 950 (traditional Chinese) Note:
代码页950 (繁体中文) 注意:
Note:For multilingual countries, please select Code Page 850 in order to support different keyboard layouts (such as US/UK English, French and German) with Euro sign.
注意:为多种语言的国家,请选定编码页850以便支持不同的键盘页面布局 (例如US/UK 英语,法国,德语) 与Euro 符号.


Congregations!
集合!
You have completed MS-DOS 7.10 installation.
你完成了MS-DOS 7.10 安装.
This distribution is in the hope that it will be useful.
这分配在希望它将有用.
Enjoy it!!!(C)Copyright Microsoft Corp 1981 - 1999.
欣赏它!!!(C)保护Microsoft公司1981 - 1999.
This program is Free Software under GNU GPL.
这程序是基于GNU GPL 的自由软件.
Any questions or problems, please contact Support Center.
任何问题,请联系支持中心.


To use MS-DOS 7.10,you must restart your system.
使用MS-DOS 7.10,你必须重新启动你的系统.
Please remove this disk in the drive before reboot.
请重新启动前从驱动器取出这个磁盘.
Would you like to reboot now?
你现在想重新启动吗?

本人水平有限，错误之处请指正。

The LZ is really great, having translated so many things. If it were me, I couldn't persevere. ^^

Congregations!
Congratulations!
This distribution is in the hope that it will be useful.
Hope the distributed version is useful to you.
Enjoy it!!!(C)Copyright Microsoft Corp 1981-1999.
Enjoy it!!! (C) Copyright Microsoft Corp 1981-1999

I just casually read a section.
Also hope the LZ can continue to improve English level, reach a higher level.

[ Last edited by fdsiuha on 2005-8-14 at 00:06 ]

RE fdsiuhua:
You have such sharp eyes to notice that little bug, but the entire translation is indeed very professional.

Is the original English text written by Wengier?

Because I have always been reading backwards...

Originally posted by darkradx at 2005-12-28 09:59 PM:
Is the original English written by Wengier?

Yes, there should be Chinese on Wengier's side

可惜没有，谢谢楼主的翻译。

AccessDOS is a DOS extension included in MS-DOS 7.10 Setup Disk which provides additional flexibility in the user-interface for DOS, and which are useful to individuals both with and without disabilities.
AccessDOS is an extension built into the MS-DOS 7.10 setup disk, providing flexible user interfaces for DOS, and it is a very useful tool.
(The AccessDOS included in the MS-DOS 7.10 setup disk is a DOS extension that provides additional user interface usability for DOS users, which is especially helpful for people with disabilities)
This extension allows the user to control the key repeat, to adjust the way the keys on the keyboard respond when pressed, to make all modifier keys into locking keys (something like the Caps Lock key),to control the mouse cursor with precision from the
This extension allows users to control key repetition, adjust the response mode of keyboard keys when pressed, make all modifier keys into lock keys (similar to the Caps Lock key), and precisely control the mouse cursor from the
(This extension can enable users to control the key repeat rate, adjust the response mode of keyboard keys when pressed, make all modifier keys, such as ALT, CTRL, SHIFT, etc., work like toggle keys like the Caps Lock key)

So, still let Wengier write it directly in Chinese.. if it can be displayed.

[ Last edited by fdsiuha on 2006-1-1 at 14:32 ]

I remember I tried it before, but first, the Chinese character system was really large and couldn't fit on a floppy disk. Second, there seemed to be some problems with mouse selection of menus under the Chinese character system, so I gave up.