中国DOS联盟

http://support.microsoft.com/default.aspx?scid=kb;zh-cn;822052

The above link may help solve the problem. But from the other symptoms you described, it's not just a problem with WIN2000.

In addition, low-level formatting does not cause additional damage to the hard drive. But remember, low-level formatting is quite slow, especially for large hard drives, and it may take a whole day. During this period, you must never forcefully shut down to terminate it, otherwise there will really be no way.

Thanks to the upstairs, still analyze specific problems specifically, see how my hard drive should be dealt with specifically?

Maybe you haven't read my post all through. I have pointed out all the error messages, but the low-level format can't be achieved. What should I do?

You once said that your hard drive was detected with bad sectors. What software was it and under what operating system, and how was the sector problem discovered? You need to describe all the details before and after the problem occurred

The thing called fbdisk, to be honest, I've never used it. From the results on Google, its effect isn't very ideal.

If you're sure it's a bad sector problem, it's recommended that you use the domestic diskgenus.

You can use fdisk to delete all partitions, then use diskgenus to partition, for example, one partition every 10G. Then use Tools/Hard Disk Surface Test, and the badsect.txt will record the locations of bad sectors. Gradually shrink the partitions.

Diskgenus is a very good domestic product, and its quality is trustworthy.

I've used the computer for so long and have never done a low-level format. Sweat.

The person upstairs, actually I don't know what kind of damage my hard drive has, just that it worked fine after changing the hard drive! The error message from the hard drive has been posted, please help everyone diagnose!

Is there really no good way for everyone with this hard drive of mine?

So many English messages are headache-inducing. Regret not having studied English well..
I used fbdisk to repair a small hard drive eliminated from an industrial monitor these days. It's only 170MB.
I used the Chinese version on the maintenance CD. I packed it and uploaded it to http://acbc.ys168.com, hope you can make use of it

Borrowing the place to say, I have a hard drive, the low-level format can't pass, take it to the dealer for low-level format, no problem at all. So I suspect it has something to do with my power supply being too small.

Dude, my hard drive had a little problem some time ago~ One day, while operating normally, the hard drive suddenly started making a clattering sound, probably having bad sectors. Unfortunately, I couldn't fix it with many software tools. Finally, I found a large enough ghost image and overwrote that bad partition. Hehe, okay, you can give it a try.

PS: You can also look for HDD Regenaration or Efficiency Source online.

Try using Efficiency Source or DM. Judging from the symptoms you mentioned, it should be a problem with the main sector of the hard drive. You can also try Jiangmin's Hard Drive Repair King!

I just fixed a computer similar to yours. It should be a logical error of the hard drive. I can just restore it with the image ghost.

Have you tried using DM?