谁能说说这一批处理的意思？thank you！ - 中国DOS联盟论坛

谁能说说这一批处理的意思？THANK YOU！这是MSDOS启动盘的BAT，请各位多多指教！

@ECHO OFF
KPUSH 27 27
KPUSH>NUL
REM Made by Wengier. China DOS Union.
REM All rights reserved. 2002-2003.
TM /F
LH KILLER
LH DOSKEY
LH CTMOUSE
::Note: The following line is for the compatibility on some systems:
LH CTMOUSE>NUL
IF %CONFIG%#==M6# GOTO SHUT
IF NOT %CONFIG%#==M5# GOTO BOOT
ECHO.
ECHO Now preparing to open README with Chinese support...
XMSDSK 80 /Y>NUL
FINDRAMD>NUL
IF %RAMDRIVE%#==# ECHO Can't create RAM disk!
IF %RAMDRIVE%#==# GOTO SHUT
EXTRACT /E /L %RAMDRIVE%\ DOSET.CAB EDIT.COM>NUL
XZL
%RAMDRIVE%\EDIT README.TXT
CLS
XZL /Q
:SHUT
CLS
WBAT BOX "Please enter your choice:",Shutdown the computer,Restart the computer
IF NOT ERRORLEVEL 3 GOTO ANS
WBAT BOX (RED ON YELLOW) "Note: Please make a choice!",OK
GOTO SHUT
:ANS
IF ERRORLEVEL 2 GOTO RES
ECHO Now trying to shutdown the computer..
ECHO.
SHUTDOWN S
ECHO.
ECHO Shutdown failed. Your computer may not have an ATX power.
:RES
ECHO Now restart the computer..
ECHO.
SHUTDOWN R
GOTO END
:BOOT
SET SM=
DREADY C:
IF ERRORLEVEL 1 ECHO Warning: Can't find any valid hard drives!
IF ERRORLEVEL 1 GOTO NOHD
ECHO Y|LOCK C:>NUL
ECHO.
ECHO Now trying to load the hard disk cache to speed the drives up...
WBAT BOX "Please choose the hard disk cache you like in 8 seconds:",PC-CACHE,SMARTDRV,Cancel #1,8
IF ERRORLEVEL 3 ECHO Cancelled.
IF NOT ERRORLEVEL 2 LH PCCACHE /SIZEXT:4096 /WRITE:OFF /WIN /MINI
IF ERRORLEVEL 2 IF NOT ERRORLEVEL 3 SET SM=Y
:NOHD
ECHO.
LH CLOAKFIX>NUL
LH CLOAKING
LH MSCDEX /D:IDE-CD /D:SCSI-CD /D:USB-CD /S /K
XMSDSK 4096 /Y
ECHO Now setting up the RAM disk...
FINDRAMD>NUL
IF %RAMDRIVE%#==# GOTO NORAM
IF NOT EXIST %RAMDRIVE%\TEMP\NUL MD %RAMDRIVE%\TEMP
SET TMP=%RAMDRIVE%\TEMP
SET TEMP=%RAMDRIVE%\TEMP
IF NOT EXIST %RAMDRIVE%\SYSTEM\NUL MD %RAMDRIVE%\SYSTEM
COPY COMMAND.COM %RAMDRIVE%\SYSTEM>NUL
IF NOT EXIST %RAMDRIVE%\SYSTEM\COMMAND.COM ECHO Warning: Failed to copy files!
IF NOT EXIST %RAMDRIVE%\SYSTEM\COMMAND.COM GOTO COPYERR
SET COMSPEC=%RAMDRIVE%\SYSTEM\COMMAND.COM
EXTRACT /E /Y /L %RAMDRIVE%\SYSTEM DOSET.CAB>NUL
EXTRACT /E /Y /L %RAMDRIVE%\SYSTEM VC.CAB>NUL
ECHO The necessary tools have been successfully loaded to drive %RAMDRIVE%.
:COPYERR
PATH=%RAMDRIVE%.;%RAMDRIVE%\SYSTEM
IF %SM%#==Y# LH SMARTDRV 4096 2048 /X
GOTO NEXT
:NORAM
ECHO Warning: Can't create RAM disk!
IF %SM%#==Y# ECHO Can't load SMARTDRV!
SET COMSPEC=A:\COMMAND.COM
:NEXT
SET SM=
SET DIRCMD=/OGN /4
SET PROMPT=$P$G
PATH=%PATH%;C:.;A:.;..
LH SHARE
LH ZENO /Q
LH MOUSCLIP /M
LH DOSLFN /C- /Z:CP936UNI.TBL
IF %CONFIG%#==M3# IF %RAMDRIVE%#==# ECHO Warning: Can't load NTFS drives support!
IF %CONFIG%#==M4# IF %RAMDRIVE%#==# ECHO Warning: Can't load NTFS drives support!
IF %CONFIG%#==M3# IF NOT %RAMDRIVE%#==# NTFSDOS /U
IF %CONFIG%#==M4# IF NOT %RAMDRIVE%#==# NTFSDOS /U
LH ESCAPE
FINDCD /Q
CLS
WRITEXT 1 1 -f15 Note:
ECHO.
IF NOT %CDROM%#==# ECHO For accessing CD/DVD drive, use the drive letter %CDROM%(1st).
IF NOT %RAMDRIVE%#==# ECHO For accessing RAM drive, use the drive letter %RAMDRIVE%.
IF NOT %CONFIG%#==M3# IF NOT %CONFIG%#==M4# ECHO For accessing NTFS drives(if any), type NTFSDOS at the command line.
ECHO At any time, you can press F12 key to return to DOS, or use the mouse.
BREAK ON
LFNFOR ON
IF %RAMDRIVE%#==# GOTO END
ECHO.
ECHO Press ENTER in 2 seconds if you want to start Volkov Commander..
WAIT 2
SET VC=
IF ERRORLEVEL 13 IF NOT ERRORLEVEL 14 SET VC=1
IF %VC%#==# ECHO Skipped.
ECHO.
ECHO Now you're in MS-DOS 7.10 prompt.
ECHO.
ECHO For more information, please look at README.TXT (in Chinese).
ECHO To start Chinese system for Chinese, type XZL at the command line.
WRITEXT 0+ 1 "Any comments, please come to the forum at: " -f15 http://dosbbs.2ya.com/ -f7
ECHO.
IF %VC%#==# GOTO END
SET VC=
ECHO.
ECHO Starting Volkov Commander...
ECHO.
SET DIF=
STRINGS UMB=UMBLARGE >NUL
STRINGS DIF=SUB %UMB%,30720 >NUL
SET UMB=
IF NOT %DIF%#==# GOTO LH
VC
GOTO END
:LH
SET DIF=
LH VC
:END
ECHO.

第1楼　6618	发表于 2003-07-27 00:00
中级用户　发帖 54　积分 356
[求助]谁能说说这一批处理的意思？thank you！谁能说说这一批处理的意思？THANK YOU！这是MSDOS启动盘的BAT，请各位多多指教！ @ECHO OFF KPUSH 27 27 KPUSH>NUL REM Made by Wengier. China DOS Union. REM All rights reserved. 2002-2003. TM /F LH KILLER LH DOSKEY LH CTMOUSE ::Note: The following line is for the compatibility on some systems: LH CTMOUSE>NUL IF %CONFIG%#==M6# GOTO SHUT IF NOT %CONFIG%#==M5# GOTO BOOT ECHO. ECHO Now preparing to open README with Chinese support... XMSDSK 80 /Y>NUL FINDRAMD>NUL IF %RAMDRIVE%#==# ECHO Can't create RAM disk! IF %RAMDRIVE%#==# GOTO SHUT EXTRACT /E /L %RAMDRIVE%\ DOSET.CAB EDIT.COM>NUL XZL %RAMDRIVE%\EDIT README.TXT CLS XZL /Q :SHUT CLS WBAT BOX "Please enter your choice:",Shutdown the computer,Restart the computer IF NOT ERRORLEVEL 3 GOTO ANS WBAT BOX (RED ON YELLOW) "Note: Please make a choice!",OK GOTO SHUT :ANS IF ERRORLEVEL 2 GOTO RES ECHO Now trying to shutdown the computer.. ECHO. SHUTDOWN S ECHO. ECHO Shutdown failed. Your computer may not have an ATX power. :RES ECHO Now restart the computer.. ECHO. SHUTDOWN R GOTO END :BOOT SET SM= DREADY C: IF ERRORLEVEL 1 ECHO Warning: Can't find any valid hard drives! IF ERRORLEVEL 1 GOTO NOHD ECHO Y\|LOCK C:>NUL ECHO. ECHO Now trying to load the hard disk cache to speed the drives up... WBAT BOX "Please choose the hard disk cache you like in 8 seconds:",PC-CACHE,SMARTDRV,Cancel #1,8 IF ERRORLEVEL 3 ECHO Cancelled. IF NOT ERRORLEVEL 2 LH PCCACHE /SIZEXT:4096 /WRITE:OFF /WIN /MINI IF ERRORLEVEL 2 IF NOT ERRORLEVEL 3 SET SM=Y :NOHD ECHO. LH CLOAKFIX>NUL LH CLOAKING LH MSCDEX /D:IDE-CD /D:SCSI-CD /D:USB-CD /S /K XMSDSK 4096 /Y ECHO Now setting up the RAM disk... FINDRAMD>NUL IF %RAMDRIVE%#==# GOTO NORAM IF NOT EXIST %RAMDRIVE%\TEMP\NUL MD %RAMDRIVE%\TEMP SET TMP=%RAMDRIVE%\TEMP SET TEMP=%RAMDRIVE%\TEMP IF NOT EXIST %RAMDRIVE%\SYSTEM\NUL MD %RAMDRIVE%\SYSTEM COPY COMMAND.COM %RAMDRIVE%\SYSTEM>NUL IF NOT EXIST %RAMDRIVE%\SYSTEM\COMMAND.COM ECHO Warning: Failed to copy files! IF NOT EXIST %RAMDRIVE%\SYSTEM\COMMAND.COM GOTO COPYERR SET COMSPEC=%RAMDRIVE%\SYSTEM\COMMAND.COM EXTRACT /E /Y /L %RAMDRIVE%\SYSTEM DOSET.CAB>NUL EXTRACT /E /Y /L %RAMDRIVE%\SYSTEM VC.CAB>NUL ECHO The necessary tools have been successfully loaded to drive %RAMDRIVE%. :COPYERR PATH=%RAMDRIVE%.;%RAMDRIVE%\SYSTEM IF %SM%#==Y# LH SMARTDRV 4096 2048 /X GOTO NEXT :NORAM ECHO Warning: Can't create RAM disk! IF %SM%#==Y# ECHO Can't load SMARTDRV! SET COMSPEC=A:\COMMAND.COM :NEXT SET SM= SET DIRCMD=/OGN /4 SET PROMPT=$P$G PATH=%PATH%;C:.;A:.;.. LH SHARE LH ZENO /Q LH MOUSCLIP /M LH DOSLFN /C- /Z:CP936UNI.TBL IF %CONFIG%#==M3# IF %RAMDRIVE%#==# ECHO Warning: Can't load NTFS drives support! IF %CONFIG%#==M4# IF %RAMDRIVE%#==# ECHO Warning: Can't load NTFS drives support! IF %CONFIG%#==M3# IF NOT %RAMDRIVE%#==# NTFSDOS /U IF %CONFIG%#==M4# IF NOT %RAMDRIVE%#==# NTFSDOS /U LH ESCAPE FINDCD /Q CLS WRITEXT 1 1 -f15 Note: ECHO. IF NOT %CDROM%#==# ECHO For accessing CD/DVD drive, use the drive letter %CDROM%(1st). IF NOT %RAMDRIVE%#==# ECHO For accessing RAM drive, use the drive letter %RAMDRIVE%. IF NOT %CONFIG%#==M3# IF NOT %CONFIG%#==M4# ECHO For accessing NTFS drives(if any), type NTFSDOS at the command line. ECHO At any time, you can press F12 key to return to DOS, or use the mouse. BREAK ON LFNFOR ON IF %RAMDRIVE%#==# GOTO END ECHO. ECHO Press ENTER in 2 seconds if you want to start Volkov Commander.. WAIT 2 SET VC= IF ERRORLEVEL 13 IF NOT ERRORLEVEL 14 SET VC=1 IF %VC%#==# ECHO Skipped. ECHO. ECHO Now you're in MS-DOS 7.10 prompt. ECHO. ECHO For more information, please look at README.TXT (in Chinese). ECHO To start Chinese system for Chinese, type XZL at the command line. WRITEXT 0+ 1 "Any comments, please come to the forum at: " -f15 http://dosbbs.2ya.com/ -f7 ECHO. IF %VC%#==# GOTO END SET VC= ECHO. ECHO Starting Volkov Commander... ECHO. SET DIF= STRINGS UMB=UMBLARGE >NUL STRINGS DIF=SUB %UMB%,30720 >NUL SET UMB= IF NOT %DIF%#==# GOTO LH VC GOTO END :LH SET DIF= LH VC :END ECHO.

第2楼　6618	发表于 2003-07-28 00:00
中级用户　发帖 54　积分 356
没人顶，自己顶！真应了一句话：求人不如求已！

第3楼　沈洁	发表于 2003-07-28 00:00
金牌会员　发帖 1,812　积分 4,590　来自上海市
基本上除了Wengier版主外没人能全部看懂，还是找Wengier好好聊聊吧！

第4楼　Roy	发表于 2003-07-28 00:00
管理员　发帖 1,633　积分 4,869
*以下是引用沈洁在2003-7-28 11:48:40的发言：* 基本上除了Wengier版主外没人能全部看懂，还是找Wengier好好聊聊吧！ To 沈洁:我看懂!! To 6618:你不懂哪裡?我可以告訴你

第5楼　沈洁	发表于 2003-07-28 00:00
金牌会员　发帖 1,812　积分 4,590　来自上海市
大体上还是看的懂得，就是其中的部分软件没有用过啊！

第6楼　dsm75	发表于 2003-07-28 00:00
中级用户　发帖 44　积分 238
其实有了wbat 的text功能 WRITEXT 文件是多余的