大家好，有没有人知道DOS下如何用量产USB-CDROM做一键GHOST - 中国DOS联盟论坛

大家好，有没有人知道DOS下如何用量产USB-CDROM做一键GHOST
下面的是我自己做的，只能在老一点的机器上用，最新的电脑老是说找不到光驱
这是我的autoexec.bat

@ECHO OFF
smartdrv.exe
set EXPAND=YES
SET DIRCMD=/O:N
set LglDrv=27 * 26 Z 25 Y 24 X 23 W 22 V 21 U 20 T 19 S 18 R 17 Q 16 P 15
set LglDrv=%LglDrv% O 14 N 13 M 12 L 11 K 10 J 9 I 8 H 7 G 6 F 5 E 4 D 3 C
cls
call setramd.bat %LglDrv%
set temp=%RAMD%:\
set tmp=%RAMD%:\
path=%RAMD%:\;a:\;%CDROM%:
copy command.com %RAMD%:\ > NUL
set comspec=%RAMD%:\command.com
copy extract.exe %RAMD%:\ > NUL

:ERROR
IF EXIST ebd.cab GOTO EXT
echo Please insert Windows 98 Startup Disk 2
echo.
pause
GOTO ERROR

:EXT
%RAMD%:\extract /y /e /l %RAMD%: ebd.cab > NUL
echo The diagnostic tools were successfully loaded to drive %RAMD%.
echo.
IF "%config%"=="NOCD" GOTO QUIT
IF "%config%"=="HELP" GOTO HELP
echo.
GOTO QUIT

:HELP
cls
call help.bat
echo Your computer will now restart and the startup menu will appear.

restart.com
GOTO QUIT

:QUIT

echo.
devload.com Usbaspi.sys /norst /nocbc /r /e
devload.com USBCD.SYS /D:usbcd001
goto end

:end
LH MSCDEX.EXE /D:mscd001 /D:usbcd001 /L:%CDROM%
LH DOSKEY.COM > NUL
findcd /s>nul
%CDROM%:
ghost -nousb -noide -clone,mode=pload,src=ghostxp.gho:1,dst=1:1 -crcignore -sure -rb

下面的是config.sys

device=himem.sys /testmem:off
devicehigh=RAMFD.SYS

files=10
buffers=10
dos=high,umb
stacks=9,256
devicehigh=ramdrive.sys /E 8192
lastdrive=z

老是说找不到光驱
ERROR: Target USB device not found

[ Last edited by panqunzhou on 2010-7-10 at 01:49 ]

第1楼　panqunzhou	发表于 2010-07-09 10:57
新手上路　发帖 3　积分 8
大家好，有没有人知道DOS下如何用量产USB-CDROM做一键GHOST 大家好，有没有人知道DOS下如何用量产USB-CDROM做一键GHOST 下面的是我自己做的，只能在老一点的机器上用，最新的电脑老是说找不到光驱这是我的autoexec.bat @ECHO OFF smartdrv.exe set EXPAND=YES SET DIRCMD=/O:N set LglDrv=27 * 26 Z 25 Y 24 X 23 W 22 V 21 U 20 T 19 S 18 R 17 Q 16 P 15 set LglDrv=%LglDrv% O 14 N 13 M 12 L 11 K 10 J 9 I 8 H 7 G 6 F 5 E 4 D 3 C cls call setramd.bat %LglDrv% set temp=%RAMD%:\ set tmp=%RAMD%:\ path=%RAMD%:\;a:\;%CDROM%: copy command.com %RAMD%:\ > NUL set comspec=%RAMD%:\command.com copy extract.exe %RAMD%:\ > NUL :ERROR IF EXIST ebd.cab GOTO EXT echo Please insert Windows 98 Startup Disk 2 echo. pause GOTO ERROR :EXT %RAMD%:\extract /y /e /l %RAMD%: ebd.cab > NUL echo The diagnostic tools were successfully loaded to drive %RAMD%. echo. IF "%config%"=="NOCD" GOTO QUIT IF "%config%"=="HELP" GOTO HELP echo. GOTO QUIT :HELP cls call help.bat echo Your computer will now restart and the startup menu will appear. restart.com GOTO QUIT :QUIT echo. devload.com Usbaspi.sys /norst /nocbc /r /e devload.com USBCD.SYS /D:usbcd001 goto end :end LH MSCDEX.EXE /D:mscd001 /D:usbcd001 /L:%CDROM% LH DOSKEY.COM > NUL findcd /s>nul %CDROM%: ghost -nousb -noide -clone,mode=pload,src=ghostxp.gho:1,dst=1:1 -crcignore -sure -rb 下面的是config.sys device=himem.sys /testmem:off devicehigh=RAMFD.SYS files=10 buffers=10 dos=high,umb stacks=9,256 devicehigh=ramdrive.sys /E 8192 lastdrive=z 老是说找不到光驱 ERROR: Target USB device not found [ Last edited by panqunzhou on 2010-7-10 at 01:49 ]

第2楼　1588848	发表于 2010-10-31 02:17
新手上路　发帖 8　积分 14
新主板就是这样，我也不明白是为何，你试试不加载 Usbaspi.sys 驱动看看。

第3楼　yaoyao1220	发表于 2010-11-06 12:25
初级用户　发帖 66　积分 95
楼主，你写的，看的我都要头晕了。。。