我的常规内存不是640k - 中国DOS联盟论坛 - 中国DOS联盟之联合DOS论坛

config.sys
-------------------------
device=c:\himem.sys
device=c:\emm386.exe ram i=a000-a7ff i=b000-b7ff 注意这里
dos=high,umb
-------------------------
其中 ram 可换成 noems
i=b000-b7ff 可去掉
i=a000-a7ff 是关键部分
测试结果

mem

Memory Type Total Used Free
---------------- -------- -------- --------
Conventional 672K 15K 657K
Upper 81K 32K 50K
Reserved 352K 352K 0K
Extended (XMS) 48,047K 323K 47,724K
---------------- -------- -------- --------
Total memory 49,152K 721K 48,431K

Total under 1 MB 753K 46K 707K

Largest executable program size 657K (673,024 bytes)
Largest free upper memory block 48K (49,392 bytes)
MS-DOS is resident in the high memory area.

mem /c /p

Modules using memory below 1 MB:

Name Total Conventional Upper Memory
-------- ---------------- ---------------- ----------------
SYSTEM 35,744 (35K) 10,656 (10K) 25,088 (25K)
HIMEM 1,120 (1K) 1,120 (1K) 0 (0K)
EMM386 3,200 (3K) 3,200 (3K) 0 (0K)
COMMAND 7,424 (7K) 0 (0K) 7,424 (7K)
Free 723,888 (707K) 673,024 (657K) 50,864 (50K)

Memory Summary:

Type of Memory Total Used Free
---------------- ----------- ----------- -----------
Conventional 688,128 15,104 673,024
Upper 83,376 32,512 50,864
Reserved 360,448 360,448 0
Extended (XMS) 49,199,696 330,320 48,869,376
---------------- ----------- ----------- -----------
Total memory 50,331,648 738,384 49,593,264

Total under 1 MB 771,504 47,616 723,888
Largest executable program size 673,008 (657K)
Largest free upper memory block 49,392 (48K)
MS-DOS is resident in the high memory area.
-----------
此方法对某些中文系统(比如 UCDOS)会有冲突
其他是否有冲突不知道,呵呵

第1楼　fcicq	发表于 2003-07-18 00:00
初级用户　发帖 20　积分 157
我的常规内存不是640k[转帖] config.sys ------------------------- device=c:\himem.sys device=c:\emm386.exe ram i=a000-a7ff i=b000-b7ff 注意这里 dos=high,umb ------------------------- 其中 ram 可换成 noems i=b000-b7ff 可去掉 i=a000-a7ff 是关键部分测试结果 mem Memory Type Total Used Free ---------------- -------- -------- -------- Conventional 672K 15K 657K Upper 81K 32K 50K Reserved 352K 352K 0K Extended (XMS) 48,047K 323K 47,724K ---------------- -------- -------- -------- Total memory 49,152K 721K 48,431K Total under 1 MB 753K 46K 707K Largest executable program size 657K (673,024 bytes) Largest free upper memory block 48K (49,392 bytes) MS-DOS is resident in the high memory area. mem /c /p Modules using memory below 1 MB: Name Total Conventional Upper Memory -------- ---------------- ---------------- ---------------- SYSTEM 35,744 (35K) 10,656 (10K) 25,088 (25K) HIMEM 1,120 (1K) 1,120 (1K) 0 (0K) EMM386 3,200 (3K) 3,200 (3K) 0 (0K) COMMAND 7,424 (7K) 0 (0K) 7,424 (7K) Free 723,888 (707K) 673,024 (657K) 50,864 (50K) Memory Summary: Type of Memory Total Used Free ---------------- ----------- ----------- ----------- Conventional 688,128 15,104 673,024 Upper 83,376 32,512 50,864 Reserved 360,448 360,448 0 Extended (XMS) 49,199,696 330,320 48,869,376 ---------------- ----------- ----------- ----------- Total memory 50,331,648 738,384 49,593,264 Total under 1 MB 771,504 47,616 723,888 Largest executable program size 673,008 (657K) Largest free upper memory block 49,392 (48K) MS-DOS is resident in the high memory area. ----------- 此方法对某些中文系统(比如 UCDOS)会有冲突其他是否有冲突不知道,呵呵

第2楼　Roy	发表于 2003-07-18 00:00
管理员　发帖 1,633　积分 4,869
WARNING: in theory, its possible to use upper memory at A000..AFFF (VGA graphics) and B000..B7FF (hercules adapter) however some programs (or the BIOS INT 10 functions) seem to write _sometimes_ into this area, so operating with this memory area IS HIGHLY DISRECOMMENDED to use A000-B7FF use it at your own risk only

第3楼　Roy	发表于 2003-07-18 00:00
管理员　发帖 1,633　积分 4,869
警告: 理论上, 它可能使用上位记忆在 A000..AFFF (VGA 图像) 和 B000..B7FF 上(hercules adapter) 但是一些程序(或BIOS Int 10 功能)似乎有时写入这个区域, 所以操作以这段上位记忆是極不建議使用A000-B7FF 使用它後果自负

第4楼　Wengier	发表于 2003-07-18 00:00
系统支持　发帖 10,521　积分 27,736
是呀。。比如如果用B000-B1FF的话，Win9x就无法启动；如果用了B000-B7FF中的任一区域的话，PDOS95就会死机！