请问 gcdrom和xcdrom的参数/C0 /C1 /C2什么意思？ - 中国DOS联盟论坛

GCDROM -- DOS SATA Native IDE CD-ROM Disk Driver, V2.3
==========================================

1. General Description
-------------------

GCDROM is a DOS driver for PC system SATA Native IDE CD-ROM drives.
The source code derive from XCDROM22 Projects.
Not support Legacy PATA mode IDE CD-ROM.

2. Setup and Configuration
-----------------------

GCDROM is loaded by the CONFIG.SYS file, which must have a command line
similar to:

GCDROM is loaded by the CONFIG.SYS file, which must have a command line
similar to:

DEVICE = GCDROM.SYS

you can use switch "/CNm" to select target controller, default is "/C0"

Examples: DEVICE=C:\DOS\GCDROM.SYS
DEVICEHIGH=C:\BIN\GCDROM.SYS /D:CDROM1 /C0

第1楼　newswan	发表于 2007-08-30 00:02
初级用户　发帖 29　积分 70
请问 gcdrom和xcdrom的参数/C0 /C1 /C2什么意思？请问 gcdrom和xcdrom的参数/C0 /C1 /C2什么意思？ DEVICEHIGH=A:\GCDROM.SYS /D:CD2 /C0 DEVICEHIGH=A:\GCDROM.SYS /D:CD3 /C1 DEVICEHIGH=A:\GCDROM.SYS /D:CD4 /C2 DEVICE=XCDROM.SYS /D:MSCD000 /C0 DEVICE=XCDROM.SYS /D:MSCD001 /C1 DEVICE=XCDROM.SYS /D:MSCD002 /C2

第2楼　bc12060101	发表于 2007-08-30 09:41
银牌会员　发帖 712　积分 1,455
GCDROM -- DOS SATA Native IDE CD-ROM Disk Driver, V2.3 ========================================== 1. General Description ------------------- GCDROM is a DOS driver for PC system SATA Native IDE CD-ROM drives. The source code derive from XCDROM22 Projects. Not support Legacy PATA mode IDE CD-ROM. 2. Setup and Configuration ----------------------- GCDROM is loaded by the CONFIG.SYS file, which must have a command line similar to: GCDROM is loaded by the CONFIG.SYS file, which must have a command line similar to: DEVICE = GCDROM.SYS you can use switch "/CNm" to select target controller, default is "/C0" Examples: DEVICE=C:\DOS\GCDROM.SYS DEVICEHIGH=C:\BIN\GCDROM.SYS /D:CDROM1 /C0

第3楼　newswan	发表于 2007-08-31 04:41
初级用户　发帖 29　积分 70
ok，谢谢

第4楼　jinlizhpc	发表于 2008-01-22 13:12
初级用户　发帖 74　积分 165
GCDROM.SYS 能取代XCDROM.SYS吗? GCDROM.SYS 能取代XCDROM.SYS吗?