WIM WMIC开发技术资料全收藏(持续更新中......) - 中国DOS联盟论坛

最近收集了一些WIM WMIC的有关资料，现在贴一些上来，需要的可以顶帖，如果斑竹看的上可以加精！

谢谢，对于WIM和WIMC我不懂，最近听说这个东西很好，可以配合WINDOWS脚本完成绝大多数的系统维护操作，而且到MS网站上的脚本中心看到大量的脚本实例，觉得很有研究价值！

根据楼下的兄弟建议，把所有的都转移到顶贴中便于下载。谢谢该兄弟的建议。

1.《WMI技术指南》：这个是基本上已经绝版的好图书，在网上唯一能找到的是来自“MS技术中国”的扫描版，该书我也是向该论坛斑竹索取的。谢谢技术中国也谢谢CN-DOS。
下载地址：
http://zhenlove.com.cn/cndos/fileup/files/Wmi技术指南(PDF).rar
2.《WMI开发文档》来自MS网站,下载地址是：http://zhenlove.com.cn/cndos/fileup/files/wmisdk(WMI开发文档).rar
3.《WMIC：从命令行对Windows的全面管理》,收集于网站:下载地址：
http://zhenlove.com.cn/cndos/fileup/files/WMIC从命令行对Windows的全面管理.rar
4.一段关于WMI的脚本,该脚本来自MS网站,原内容有点问题,稍微修正了一下.要运行该脚本,请复制代码到记事本中并保存为"search.vbs",注意保存时必须加引号,否则不是脚本文件而是文本文件;然后到CMD下使用命令,格式如下:Search.vbs 类关键字,该脚本可以实现搜索WMI CLASS的是属性等.
;代码开始=============================================
Set args = wscript.arguments
If args.Count <= 0 Then
Wscript.Echo "Tool to search for a matching class in the WMI Repository. "
Wscript.Echo "USAGE: <keywordToSearch> "
Wscript.Echo "Example1: Cscript search.vbs service"
Wscript.Echo "Example2: Cscript search.vbs video root\cimv2"
Else
' If no Namespace is specified then the Default is the ROOT namespace
rootNamespace = "\\.\ROOT"
keyword = args(0)
If args.Count > 1 Then
rootNamespace = args(1)
End If
EnumNameSpace rootNamespace
Wscript.Echo vbNewLine
End if

' Subroutine to recurse through the namespaces

Sub EnumNameSpace(parentNamespaceName)

Set objService = GetObject("winmgmts:" & parentNamespaceName)

Set collMatchingClasses = objService.Execquery _
("Select * From meta_class Where __class " & _
"Like '%" & keyword & "%'")
If (collMatchingClasses.count > 0) Then
Wscript.Echo vbNewLine
Wscript.Echo vbNewLine
Wscript.Echo "Matching Classes Under Namespace: " & parentNamespaceName

For Each matchingClass in collMatchingClasses
Wscript.Echo " " & matchingClass.Path_.CLASS
Next
End if

Set collSubNamespaces = objService.Execquery _
("select * from __namespace")
For Each subNameSpace in collSubNamespaces
EnumNameSpace subNameSpace.path_.namespace + _
"\" + subNameSpace.Name
Next

End Sub
;代码结束======================================================

5.WMI CLASSES有关资料,来源于MS网站,下载地址:http://zhenlove.com.cn/cndos/fileup/files/WMI Classes.rar
关于检查电脑所有脚本版本检测的有关脚本,请把代码保存为version.vbs.双击运行或在CMD下输入 start version.vbs (注意匹配自己的路径)
;代码开始===============================================
On Error Resume Next
WScript.Echo "WSH Version: " & WScript.Version
Wscript.Echo "VBScript Version: " & ScriptEngineMajorVersion _
& "." & ScriptEngineMinorVersion
strComputer = "."
Set objWMIService = GetObject("winmgmts:" _
& "{impersonationLevel=impersonate}!\\" & strComputer _
& "\root\cimv2")
Set colWMISettings = objWMIService.ExecQuery _
("Select * from Win32_WMISetting")
For Each objWMISetting in colWMISettings
Wscript.Echo "WMI Version: " & objWMISetting.BuildVersion
Next
Set objShell = CreateObject("WScript.Shell")
strAdsiVersion = objShell.RegRead("HKLM\SOFTWARE\Microsoft\Active Setup\Installed Components\{E92B03AB-B707-11d2-9CBD-0000F87A369E}\Version")
If strAdsiVersion = vbEmpty Then
strAdsiVersion = objShell.RegRead("HKLM\SOFTWARE\Microsoft\ADs\Providers\LDAP\")
If strAdsiVersion = vbEmpty Then
strAdsiVersion = "ADSI is not installed."
Else
strAdsiVersion = "2.0"
End If
End If
WScript.Echo "ADSI Version: " & strAdsiVersion

;代码结束==========================================
.再来传一个WMI的有关工具,这个还是从MS网站上搞下来的.MS把这个东西吹的很好哟.这个实际上是一个HTML文件.我把代码贴上来,请复制所有代码到文本文件中,然后保存为"scriptomatic.hta"双击运行即可.
;代码开始====================================
<html>

<title>Windows .NET Server Resource Kit - Scriptomatic</title>

<HTA:APPLICATION
ID="objScriptomatic"
APPLICATIONNAME="Scriptomatic"
SCROLL="no"
SINGLEINSTANCE="yes"
WINDOWSTATE="normal"
>
<head>

<style>
BODY
{
background-color: buttonface;
font-family: Helvetica;
font-size: 8pt;
margin-top: 10px;
margin-left: 10px;
margin-right: 10px;
margin-bottom: 10px;
}

.button
{
font-family: Helvetica;
font-size: 8pt;
width: 35px;
}

textarea
{
font-family: arial;
font-size: 8pt;
margin-left: 3px;
}

select
{
font-family: arial;
font-size: 8pt;
width: 450px;
margin-left: 0px;
}

</style>

<script language="vbscript">

'*********************************************
'* WHILE LOADING...
'*
'* As the application loads, we open a new
'* browser window to act as a crude progress dialog
'* while we wait for the enumeration of the WMI
'* classes to complete.
'*
'* We minimize the parent window prior to presenting
'* the progress dialog and resize it back to normal
'* once the classes are enumerated.
'*
'*********************************************

Sub Window_Onload

'* resize parent window

self.ResizeTo 1,1
self.MoveTo 300,300

'* create dialog window

Set objDialogWindow = window.Open("about:blank","ProgressWindow","height=15,width=250,left=300,top=300,status=no,titlebar=no,toolbar=no,menubar=no,location=no,scrollbars=no")
objDialogWindow.Focus()
objDialogWindow.ResizeTo 250,15
objDialogWindow.document.body.style.fontFamily = "Helvetica"
objDialogWindow.document.body.style.fontSize = "11pt"
objDialogWindow.document.writeln "<html><body>Loading WMI Classes.</body></html>"
objDialogWindow.document.title = "Please wait."
objDialogWindow.document.body.style.backgroundColor = "buttonface"
objDialogWindow.document.body.style.borderStyle = "none"
objDialogWindow.document.body.style.marginTop = 15

'****************************************************************************
'* enumerate the WMI classes in the cimv2 namespace, filling up a recordset
'* with the names of the classes that begin with Win32_ and are not association
'* classes. we'll use the class names stored in the recordset to populate a
'* pulldown.
'*****************************************************************************

Const adVarChar = 200
Const MaxCharacters = 255
strComputer = "."

Set rsDataList = CreateObject("ADODB.Recordset")
rsDataList.Fields.Append "ClassName", adVarChar, MaxCharacters
rsDataList.Open

Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")

iCounter = 0
For Each objclass in objWMIService.SubclassesOf()

'* write a . to the dialog window once for every 250 classes
'* to let the user know something is still happening.

iCounter = iCounter + 1
If iCounter Mod 250 = 0 Then
objDialogWindow.document.writeln "."
End If
bIsQualifier = False
If UCase(Left(objClass.Path_.Class,5)) = "WIN32" Then
For Each Qualifier in objClass.Qualifiers_
If UCase(Trim(Qualifier.Name)) = "ASSOCIATION" Then
bIsQualifier = True
End If
Next

'* the class name starts with win32_ and is not an association
'* class - so append it to the recordset

If bIsQualifier = False Then
rsDataList.AddNew
rsDataList("ClassName") = objClass.Path_.Class
rsDataList.Update
End If
End If
Next

'* populate the pulldown

rsDataList.Sort = "ClassName"
rsDataList.MoveFirst
strHTML = "<select onChange=""ComposeCode()"" name=ClassesPulldown>" &_
"<option value=""PulldownMessage"">Begin by selecting a class"
Do Until rsDataList.EOF
strHTML = strHTML & "<option value= " & chr(34) &_
rsDataList.Fields.Item("ClassName") & chr(34) &_
">" & rsDataList.Fields.Item("ClassName")
rsDataList.MoveNext
Loop
strHTML = strHTML & "</select>"
wmi_classes.insertAdjacentHTML "beforeEnd", strHTML

'* the classes are enumerated, close the progress dialog
'* and resize the main window

objDialogWindow.Close
self.Focus()
self.ResizeTo 670,550
self.MoveTo 200,200

'* the user hasn't had a chance to select a class and generate
'* a script - so disable the run and save buttons because
'* they are not yet meaningful.

run_button.disabled = True
save_button.disabled = True

End Sub

'****************************************************************************
'* when the user selects a class from the pulldown, the ComposeCode subroutine
'* is called. it queries WMI to determine the properties of the class the user
'* selected and uses the information to construct sample code which it puts
'* in the main window's textarea.
'****************************************************************************

Sub ComposeCode

'* if the user happens to select the message instead of a class, just
'* disable the run and save buttons and exit the subroutine

If ClassesPulldown.Value = "PulldownMessage" Then
run_button.disabled = True
save_button.disabled = True
Exit Sub
End If

strComputer = "."
Set objWMIService = GetObject("winmgmts:{impersonationLevel=impersonate}!\\" & strComputer & "\root\cimv2")
Set objClass = objWMIService.Get(ClassesPulldown.Value)
strHTML = "<textarea cols=100 rows=30>"
strHTML = strHTML & "On Error Resume Next" & Chr(10)
strHTML = strHTML & "strComputer = " & chr(34) & "." & chr(34) & Chr(10)
strHTML = strHTML & "Set objWMIService = GetObject(" & chr(34) & "winmgmts:\\" & chr(34) & " & strComputer & " & chr(34) & "\root\cimv2" & chr(34) & ")" & Chr(10)
strHTML = strHTML & "Set colItems = objWMIService.ExecQuery(" & chr(34) & "Select * from " & ClassesPulldown.value & chr(34) & ",,48)" & Chr(10)
strHTML = strHTML & "For Each objItem in colItems" & Chr(10)
For Each objProperty in objClass.properties_
strHTML = strHTML & "    Wscript.Echo " & chr(34) & objProperty.name & ": " & chr(34) & " & " & "objItem." & objProperty.name & Chr(10)
Next
strHTML = strHTML & "Next" & "</textarea>"
code.InnerHTML= strHTML

'* once the code is successfully composed and put into the textarea, ensure
'* that the run and save buttons are enabled

run_button.disabled = False
save_button.disabled = False

End Sub

'****************************************************************************
'* when the user presses the Run button, we use the WshShell object's Run
'* method to run the code currently in the textarea under cscript.exe. we use
'* cmd.exe's /k parameter to ensure the command window remains visible after
'* the script has finished running.
'****************************************************************************

Sub RunScript

Set objFS = CreateObject("Scripting.FileSystemObject")
strTmpName = "temp_script.vbs"
Set objScript = objFS.CreateTextFile(strTmpName)
objScript.Write code.InnerText
objScript.Close
Set objShell = CreateObject("WScript.Shell")
strCmdLine = "cmd /k cscript.exe "
strCmdLine = strCmdLine & strTmpName
objShell.Run(strCmdLine)

End Sub

'****************************************************************************
'* when the user presses the Save button, we present them with an InputBox
'* and force them to give us the full path to where they'd like to the save
'* the script that is currently in the textarea. The user is probably quite
'* upset with our laziness here....and who can blame them?
'****************************************************************************

Sub SaveScript

Set objFSO = CreateObject("Scripting.FileSystemObject")
strSaveFileName = InputBox("Please enter the complete path where you want to save your script (for example, C:\Scripts\MyScript.vbs).")
If strSaveFileName = "" Then
Exit Sub
End If

Set objFile = objFSO.CreateTextFile(strSaveFileName)
objFile.WriteLine code.InnerText
objFile.Close

End Sub

'****************************************************************************
'* when the user presses the Open button, we present them with an InputBox
'* and force them to give us the full path to the script they'd like to open.
'* This is, of course, rather wonky - but it's meant to be.
'****************************************************************************

Sub OpenScript

Set objFSO = CreateObject("Scripting.FileSystemObject")
strOpenFileName = InputBox("Please enter the complete path name for your script (for example, C:\Scripts\MyScript.vbs).")
If strOpenFileName = "" Then
Exit Sub
End If

Set objFile = objFSO.OpenTextFile(strOpenFileName)
strHTML = "<textarea cols=100 rows=30>"
strHTML = strHTML & objFile.ReadAll()
strHTML = strHTML & "</textarea>"
code.InnerHTML = strHTML
objFile.Close
run_button.disabled = False
save_button.disabled = False

End Sub

'****************************************************************************
'* when the user presses the Quit button, the file where we've been storing
'* the scripts gets deleted and the main window closes.
'****************************************************************************

Sub QuitScript

On Error Resume Next
Set objFSO = CreateObject("Scripting.FileSystemObject")
objFSO.DeleteFile "temp_script.vbs"
Set objFSO = Nothing
self.Close()

End Sub

</script>
</head>

'***********************************************************
'* our HTML layout - the only thing of note here is that when
'* each of the buttons is pressed (clicked), their onClick
'* attributes causes the appropriate subroutine to be called
'***********************************************************

<body>

<table>
<td>
<span id="wmi_classes"> </span>
<input id=runbutton class="button" type="button" value="Run" name="run_button" onClick="RunScript()">
<input id=savebutton class="button" type="button" value="Save" name="save_button" onClick="SaveScript()">
<input id=openbutton class="button" type="button" value="Open" name="open_button" onClick="OpenScript()">
<input id=quitbutton class="button" type="button" value="Quit" name="quit_button" onClick="QuitScript()">
<div ID=code_header></div>
<div id="code"></div>
</td>
</tr>
</table>

</body>

</html>

;代码结束==============================================
9.再来一个WMI脚本教程.这个也是从网络上搜集的，不记得下载地址了.好象里面差一个第四章的,可以自己到网络上搜索,好象在MS网站也有，地址是http://www.microsoft.com/china/M ... inicscripting.mspx.

下载地址:http://zhenlove.com.cn/cndos/fileup/files/wmi脚本入门(pdf不完整).rar

8.再来一个WMI查询分析工具.是外国网站的.里面赋有源代码,不下载的要后悔哟.不过我的电脑上运行不了该程序,不知道为什么，大家测试反馈下是什么问题.谢谢。
下载地址:
http://zhenlove.com.cn/cndos/fileup/files/WQLAnalyzer_1.02(wmi查询分析工具有源代码).zip

10.《WINDOWS WMI参考》,由于这个只能在网络上阅读，找不到相关的电子书下载，所以就把所有抓的网页发上来。其中名称前面的数字代表章节号，如0101代表第一章第一节，050105代表第五章-第一节-第一小节。
下载地址:
http://zhenlove.com.cn/cndos/fileup/files/windowswmi参考.rar
11.《WMI开发工具包》,这个是直接从MS 网站上下的，其中已经包含前面发的wmisdk(WMI开发文档).rar，所以下载这个的可以不再下载上面的哪个。
http://zhenlove.com.cn/cndos/fileup/files/
wmisdk(WMI开发工具包).rar

[ Last edited by HUNRYBECKY on 2006-12-18 at 12:06 PM ]

第1楼　HUNRYBECKY	发表于 2006-12-13 02:16
银牌会员　发帖 442　积分 1,179
[绝对好资料]WIM WMIC开发技术资料全收藏(持续更新中......) 最近收集了一些WIM WMIC的有关资料，现在贴一些上来，需要的可以顶帖，如果斑竹看的上可以加精！谢谢，对于WIM和WIMC我不懂，最近听说这个东西很好，可以配合WINDOWS脚本完成绝大多数的系统维护操作，而且到MS网站上的脚本中心看到大量的脚本实例，觉得很有研究价值！根据楼下的兄弟建议，把所有的都转移到顶贴中便于下载。谢谢该兄弟的建议。 1.《WMI技术指南》：这个是基本上已经绝版的好图书，在网上唯一能找到的是来自“MS技术中国”的扫描版，该书我也是向该论坛斑竹索取的。谢谢技术中国也谢谢CN-DOS。下载地址： http://zhenlove.com.cn/cndos/fileup/files/Wmi技术指南(PDF).rar 2.《WMI开发文档》来自MS网站,下载地址是：http://zhenlove.com.cn/cndos/fileup/files/wmisdk(WMI开发文档).rar 3.《WMIC：从命令行对Windows的全面管理》,收集于网站:下载地址： http://zhenlove.com.cn/cndos/fileup/files/WMIC从命令行对Windows的全面管理.rar 4.一段关于WMI的脚本,该脚本来自MS网站,原内容有点问题,稍微修正了一下.要运行该脚本,请复制代码到记事本中并保存为"search.vbs",注意保存时必须加引号,否则不是脚本文件而是文本文件;然后到CMD下使用命令,格式如下:Search.vbs 类关键字,该脚本可以实现搜索WMI CLASS的是属性等. ;代码开始============================================= Set args = wscript.arguments If args.Count <= 0 Then Wscript.Echo "Tool to search for a matching class in the WMI Repository. " Wscript.Echo "USAGE: <keywordToSearch> " Wscript.Echo "Example1: Cscript search.vbs service" Wscript.Echo "Example2: Cscript search.vbs video root\cimv2" Else ' If no Namespace is specified then the Default is the ROOT namespace rootNamespace = "\\.\ROOT" keyword = args(0) If args.Count > 1 Then rootNamespace = args(1) End If EnumNameSpace rootNamespace Wscript.Echo vbNewLine End if ' Subroutine to recurse through the namespaces Sub EnumNameSpace(parentNamespaceName) Set objService = GetObject("winmgmts:" & parentNamespaceName) Set collMatchingClasses = objService.Execquery _ ("Select * From meta_class Where __class " & _ "Like '%" & keyword & "%'") If (collMatchingClasses.count > 0) Then Wscript.Echo vbNewLine Wscript.Echo vbNewLine Wscript.Echo "Matching Classes Under Namespace: " & parentNamespaceName For Each matchingClass in collMatchingClasses Wscript.Echo " " & matchingClass.Path_.CLASS Next End if Set collSubNamespaces = objService.Execquery _ ("select * from __namespace") For Each subNameSpace in collSubNamespaces EnumNameSpace subNameSpace.path_.namespace + _ "\" + subNameSpace.Name Next End Sub ;代码结束====================================================== 5.WMI CLASSES有关资料,来源于MS网站,下载地址:http://zhenlove.com.cn/cndos/fileup/files/WMI Classes.rar 关于检查电脑所有脚本版本检测的有关脚本,请把代码保存为version.vbs.双击运行或在CMD下输入 start version.vbs (注意匹配自己的路径) ;代码开始=============================================== On Error Resume Next WScript.Echo "WSH Version: " & WScript.Version Wscript.Echo "VBScript Version: " & ScriptEngineMajorVersion _ & "." & ScriptEngineMinorVersion strComputer = "." Set objWMIService = GetObject("winmgmts:" _ & "{impersonationLevel=impersonate}!\\" & strComputer _ & "\root\cimv2") Set colWMISettings = objWMIService.ExecQuery _ ("Select * from Win32_WMISetting") For Each objWMISetting in colWMISettings Wscript.Echo "WMI Version: " & objWMISetting.BuildVersion Next Set objShell = CreateObject("WScript.Shell") strAdsiVersion = objShell.RegRead("HKLM\SOFTWARE\Microsoft\Active Setup\Installed Components\{E92B03AB-B707-11d2-9CBD-0000F87A369E}\Version") If strAdsiVersion = vbEmpty Then strAdsiVersion = objShell.RegRead("HKLM\SOFTWARE\Microsoft\ADs\Providers\LDAP\") If strAdsiVersion = vbEmpty Then strAdsiVersion = "ADSI is not installed." Else strAdsiVersion = "2.0" End If End If WScript.Echo "ADSI Version: " & strAdsiVersion ;代码结束========================================== .再来传一个WMI的有关工具,这个还是从MS网站上搞下来的.MS把这个东西吹的很好哟.这个实际上是一个HTML文件.我把代码贴上来,请复制所有代码到文本文件中,然后保存为"scriptomatic.hta"双击运行即可. ;代码开始==================================== <html> <!--******************************************************************** '* '* File: scriptomatic.hta '* Created: August 2002 '* Version: 1.0 '* '* Description: Learning tool. Enables users to generate and run '* WSH scripts (in VBScript) that use WMI to display '* properties available through the Win32_ classes. '* '* '* Copyright (C) 2002 Microsoft Corporation '* '******************************************************************--> <title>Windows .NET Server Resource Kit - Scriptomatic</title> <HTA:APPLICATION ID="objScriptomatic" APPLICATIONNAME="Scriptomatic" SCROLL="no" SINGLEINSTANCE="yes" WINDOWSTATE="normal" > <head> <style> BODY { background-color: buttonface; font-family: Helvetica; font-size: 8pt; margin-top: 10px; margin-left: 10px; margin-right: 10px; margin-bottom: 10px; } .button { font-family: Helvetica; font-size: 8pt; width: 35px; } textarea { font-family: arial; font-size: 8pt; margin-left: 3px; } select { font-family: arial; font-size: 8pt; width: 450px; margin-left: 0px; } </style> <script language="vbscript"> '******************************************* '* WHILE LOADING... '* '* As the application loads, we open a new '* browser window to act as a crude progress dialog '* while we wait for the enumeration of the WMI '* classes to complete. '* '* We minimize the parent window prior to presenting '* the progress dialog and resize it back to normal '* once the classes are enumerated. '* '********************************************* Sub Window_Onload '* resize parent window self.ResizeTo 1,1 self.MoveTo 300,300 '* create dialog window Set objDialogWindow = window.Open("about:blank","ProgressWindow","height=15,width=250,left=300,top=300,status=no,titlebar=no,toolbar=no,menubar=no,location=no,scrollbars=no") objDialogWindow.Focus() objDialogWindow.ResizeTo 250,15 objDialogWindow.document.body.style.fontFamily = "Helvetica" objDialogWindow.document.body.style.fontSize = "11pt" objDialogWindow.document.writeln "<html><body>Loading WMI Classes.</body></html>" objDialogWindow.document.title = "Please wait." objDialogWindow.document.body.style.backgroundColor = "buttonface" objDialogWindow.document.body.style.borderStyle = "none" objDialogWindow.document.body.style.marginTop = 15 '**************************************************************************** '* enumerate the WMI classes in the cimv2 namespace, filling up a recordset '* with the names of the classes that begin with Win32_ and are not association '* classes. we'll use the class names stored in the recordset to populate a '* pulldown. '***************************************************************************** Const adVarChar = 200 Const MaxCharacters = 255 strComputer = "." Set rsDataList = CreateObject("ADODB.Recordset") rsDataList.Fields.Append "ClassName", adVarChar, MaxCharacters rsDataList.Open Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2") iCounter = 0 For Each objclass in objWMIService.SubclassesOf() '* write a . to the dialog window once for every 250 classes '* to let the user know something is still happening. iCounter = iCounter + 1 If iCounter Mod 250 = 0 Then objDialogWindow.document.writeln "." End If bIsQualifier = False If UCase(Left(objClass.Path_.Class,5)) = "WIN32" Then For Each Qualifier in objClass.Qualifiers_ If UCase(Trim(Qualifier.Name)) = "ASSOCIATION" Then bIsQualifier = True End If Next '* the class name starts with win32_ and is not an association '* class - so append it to the recordset If bIsQualifier = False Then rsDataList.AddNew rsDataList("ClassName") = objClass.Path_.Class rsDataList.Update End If End If Next '* populate the pulldown rsDataList.Sort = "ClassName" rsDataList.MoveFirst strHTML = "<select onChange=""ComposeCode()"" name=ClassesPulldown>" &_ "<option value=""PulldownMessage"">Begin by selecting a class" Do Until rsDataList.EOF strHTML = strHTML & "<option value= " & chr(34) &_ rsDataList.Fields.Item("ClassName") & chr(34) &_ ">" & rsDataList.Fields.Item("ClassName") rsDataList.MoveNext Loop strHTML = strHTML & "</select>" wmi_classes.insertAdjacentHTML "beforeEnd", strHTML '* the classes are enumerated, close the progress dialog '* and resize the main window objDialogWindow.Close self.Focus() self.ResizeTo 670,550 self.MoveTo 200,200 '* the user hasn't had a chance to select a class and generate '* a script - so disable the run and save buttons because '* they are not yet meaningful. run_button.disabled = True save_button.disabled = True End Sub '**************************************************************************** '* when the user selects a class from the pulldown, the ComposeCode subroutine '* is called. it queries WMI to determine the properties of the class the user '* selected and uses the information to construct sample code which it puts '* in the main window's textarea. '**************************************************************************** Sub ComposeCode '* if the user happens to select the message instead of a class, just '* disable the run and save buttons and exit the subroutine If ClassesPulldown.Value = "PulldownMessage" Then run_button.disabled = True save_button.disabled = True Exit Sub End If strComputer = "." Set objWMIService = GetObject("winmgmts:{impersonationLevel=impersonate}!\\" & strComputer & "\root\cimv2") Set objClass = objWMIService.Get(ClassesPulldown.Value) strHTML = "<textarea cols=100 rows=30>" strHTML = strHTML & "On Error Resume Next" & Chr(10) strHTML = strHTML & "strComputer = " & chr(34) & "." & chr(34) & Chr(10) strHTML = strHTML & "Set objWMIService = GetObject(" & chr(34) & "winmgmts:\\" & chr(34) & " & strComputer & " & chr(34) & "\root\cimv2" & chr(34) & ")" & Chr(10) strHTML = strHTML & "Set colItems = objWMIService.ExecQuery(" & chr(34) & "Select * from " & ClassesPulldown.value & chr(34) & ",,48)" & Chr(10) strHTML = strHTML & "For Each objItem in colItems" & Chr(10) For Each objProperty in objClass.properties_ strHTML = strHTML & "    Wscript.Echo " & chr(34) & objProperty.name & ": " & chr(34) & " & " & "objItem." & objProperty.name & Chr(10) Next strHTML = strHTML & "Next" & "</textarea>" code.InnerHTML= strHTML '* once the code is successfully composed and put into the textarea, ensure '* that the run and save buttons are enabled run_button.disabled = False save_button.disabled = False End Sub '**************************************************************************** '* when the user presses the Run button, we use the WshShell object's Run '* method to run the code currently in the textarea under cscript.exe. we use '* cmd.exe's /k parameter to ensure the command window remains visible after '* the script has finished running. '************************************************************************** Sub RunScript Set objFS = CreateObject("Scripting.FileSystemObject") strTmpName = "temp_script.vbs" Set objScript = objFS.CreateTextFile(strTmpName) objScript.Write code.InnerText objScript.Close Set objShell = CreateObject("WScript.Shell") strCmdLine = "cmd /k cscript.exe " strCmdLine = strCmdLine & strTmpName objShell.Run(strCmdLine) End Sub '************************************************************************** '* when the user presses the Save button, we present them with an InputBox '* and force them to give us the full path to where they'd like to the save '* the script that is currently in the textarea. The user is probably quite '* upset with our laziness here....and who can blame them? '************************************************************************** Sub SaveScript Set objFSO = CreateObject("Scripting.FileSystemObject") strSaveFileName = InputBox("Please enter the complete path where you want to save your script (for example, C:\Scripts\MyScript.vbs).") If strSaveFileName = "" Then Exit Sub End If Set objFile = objFSO.CreateTextFile(strSaveFileName) objFile.WriteLine code.InnerText objFile.Close End Sub '************************************************************************** '* when the user presses the Open button, we present them with an InputBox '* and force them to give us the full path to the script they'd like to open. '* This is, of course, rather wonky - but it's meant to be. '************************************************************************** Sub OpenScript Set objFSO = CreateObject("Scripting.FileSystemObject") strOpenFileName = InputBox("Please enter the complete path name for your script (for example, C:\Scripts\MyScript.vbs).") If strOpenFileName = "" Then Exit Sub End If Set objFile = objFSO.OpenTextFile(strOpenFileName) strHTML = "<textarea cols=100 rows=30>" strHTML = strHTML & objFile.ReadAll() strHTML = strHTML & "</textarea>" code.InnerHTML = strHTML objFile.Close run_button.disabled = False save_button.disabled = False End Sub '************************************************************************** '* when the user presses the Quit button, the file where we've been storing '* the scripts gets deleted and the main window closes. '************************************************************************** Sub QuitScript On Error Resume Next Set objFSO = CreateObject("Scripting.FileSystemObject") objFSO.DeleteFile "temp_script.vbs" Set objFSO = Nothing self.Close() End Sub </script> </head> '********************************************************* '* our HTML layout - the only thing of note here is that when '* each of the buttons is pressed (clicked), their onClick '* attributes causes the appropriate subroutine to be called '*********************************************************** <body> <table> <td> <span id="wmi_classes"> </span> <input id=runbutton class="button" type="button" value="Run" name="run_button" onClick="RunScript()"> <input id=savebutton class="button" type="button" value="Save" name="save_button" onClick="SaveScript()"> <input id=openbutton class="button" type="button" value="Open" name="open_button" onClick="OpenScript()"> <input id=quitbutton class="button" type="button" value="Quit" name="quit_button" onClick="QuitScript()"> <div ID=code_header></div> <div id="code"></div> </td> </tr> </table> </body> </html> ;代码结束============================================== 9.再来一个WMI脚本教程.这个也是从网络上搜集的，不记得下载地址了.好象里面差一个第四章的,可以自己到网络上搜索,好象在MS网站也有，地址是http://www.microsoft.com/china/M ... inicscripting.mspx. 下载地址:http://zhenlove.com.cn/cndos/fileup/files/wmi脚本入门(pdf不完整).rar 8.再来一个WMI查询分析工具.是外国网站的.里面赋有源代码,不下载的要后悔哟.不过我的电脑上运行不了该程序,不知道为什么，大家测试反馈下是什么问题.谢谢。下载地址: http://zhenlove.com.cn/cndos/fileup/files/WQLAnalyzer_1.02(wmi查询分析工具有源代码).zip 10.《WINDOWS WMI参考》,由于这个只能在网络上阅读，找不到相关的电子书下载，所以就把所有抓的网页发上来。其中名称前面的数字代表章节号，如0101代表第一章第一节，050105代表第五章-第一节-第一小节。下载地址: http://zhenlove.com.cn/cndos/fileup/files/windowswmi参考.rar 11.《WMI开发工具包》,这个是直接从MS 网站上下的，其中已经包含前面发的wmisdk(WMI开发文档).rar，所以下载这个的可以不再下载上面的哪个。 http://zhenlove.com.cn/cndos/fileup/files/ wmisdk(WMI开发工具包).rar [ Last edited by HUNRYBECKY on 2006-12-18 at 12:06 PM ]

第2楼　HUNRYBECKY	发表于 2006-12-13 02:17
银牌会员　发帖 442　积分 1,179
不好意思，搞掉了一个。《WMI开发文档》开发文档的下载地址是：http://zhenlove.com.cn/cndos/fileup/files/wmisdk(WMI开发文档).rar

第3楼　lxmxn	发表于 2006-12-13 02:21
版主　发帖 4,938　积分 11,386
正在下载中…… 　　建议把《WMI开发技术文档》的下载链接也打上来。还不知道里面关于WMIC的内容有多少，因为这是命令行方式的命令，所以主要还是发关于WMIC的比较好。如果WMI里面包含了WMIC的内容就最好不过了。

第4楼　lxmxn	发表于 2006-12-13 02:22
版主　发帖 4,938　积分 11,386
汗一个先…… 　　　　发晚了一步。

第5楼　HUNRYBECKY	发表于 2006-12-13 02:23
银牌会员　发帖 442　积分 1,179
WMI是包含WMIC的。所以可以下载哈。

第6楼　HUNRYBECKY	发表于 2006-12-13 02:26
银牌会员　发帖 442　积分 1,179
3.《WMIC：从命令行对Windows的全面管理》：在补一个，这个是从网络上收集的，也不知道是从那里下载的了。下载地址： http://zhenlove.com.cn/cndos/fileup/files/WMIC从命令行对Windows的全面管理.rar

第7楼　HUNRYBECKY	发表于 2006-12-13 02:28
银牌会员　发帖 442　积分 1,179
这里的上传系统好慢呀。传一个《WMI技术指南》都花了我两个小时。

第8楼　lxmxn	发表于 2006-12-13 02:29
版主　发帖 4,938　积分 11,386
2楼中的链接无法下载，提示找不到资源。

第9楼　lxmxn	发表于 2006-12-13 02:30
版主　发帖 4,938　积分 11,386
6楼同样的问题。

第10楼　HUNRYBECKY	发表于 2006-12-13 02:32
银牌会员　发帖 442　积分 1,179
2楼以下的都还在上传中，因为上传系统说了：下载地址前面不变，后面的就是文件名，所以传完后应该可以连接，如果不行，通知我修正下。

第11楼　lxmxn	发表于 2006-12-13 02:34
版主　发帖 4,938　积分 11,386
晕死，还没有完全上传上去你就把地址帖出来啊？汗一个先……

第12楼　HUNRYBECKY	发表于 2006-12-13 02:35
银牌会员　发帖 442　积分 1,179
2楼的已经传完，连接果然是正确的。不好意思，我这里传，很慢，所以先发帖，呵呵，太难等了。

第13楼　HUNRYBECKY	发表于 2006-12-13 02:44
银牌会员　发帖 442　积分 1,179
4.再来一段关于WMI的脚本,该脚本来自MS网站,原内容有点问题,稍微修正了一下.要运行该脚本,请复制代码到记事本中并保存为"search.vbs",注意保存时必须加引号,否则不是脚本文件而是文本文件;然后到CMD下使用命令,格式如下:Search.vbs 类关键字,该脚本可以实现搜索WMI CLASS的是属性等. ;代码开始============================================= Set args = wscript.arguments If args.Count <= 0 Then Wscript.Echo "Tool to search for a matching class in the WMI Repository. " Wscript.Echo "USAGE: <keywordToSearch> [<namespaceToSearchIn>]" Wscript.Echo "Example1: Cscript search.vbs service" Wscript.Echo "Example2: Cscript search.vbs video root\cimv2" Else ' If no Namespace is specified then the Default is the ROOT namespace rootNamespace = "\\.\ROOT" keyword = args(0) If args.Count > 1 Then rootNamespace = args(1) End If EnumNameSpace rootNamespace Wscript.Echo vbNewLine End if ' Subroutine to recurse through the namespaces Sub EnumNameSpace(parentNamespaceName) Set objService = GetObject("winmgmts:" & parentNamespaceName) Set collMatchingClasses = objService.Execquery _ ("Select * From meta_class Where __class " & _ "Like '%" & keyword & "%'") If (collMatchingClasses.count > 0) Then Wscript.Echo vbNewLine Wscript.Echo vbNewLine Wscript.Echo "Matching Classes Under Namespace: " & parentNamespaceName For Each matchingClass in collMatchingClasses Wscript.Echo " " & matchingClass.Path_.CLASS Next End if Set collSubNamespaces = objService.Execquery _ ("select * from __namespace") For Each subNameSpace in collSubNamespaces EnumNameSpace subNameSpace.path_.namespace + _ "\" + subNameSpace.Name Next End Sub ;代码结束======================================================

第14楼　lxmxn	发表于 2006-12-13 02:44
版主　发帖 4,938　积分 11,386
恩，可以了，三个文件全部下载完毕，感谢。

第15楼　HUNRYBECKY	发表于 2006-12-13 02:48
银牌会员　发帖 442　积分 1,179
5.在来一个有关WMI CLASS的资料,这个资料同样来源于MS网站,下载地址:http://zhenlove.com.cn/cndos/fileup/files/WMI Classes.rar