（已结）请问menuitem有特殊的要求吗 - 中国DOS联盟论坛

menuitem=READNTFS,READNTFS.
menuitem=PASSWORD,Change NT+ System Password.
menuitem=UNIFLASH,UNIFLASH.
SUBMENU=MENU,Main Menu <<<<

改为下面的,看起来也没有什么吗,难道小小的DOS也会对单词敏感吗，试图改为123456凑足6位数也无法解决，真是见鬼。

menuitem=IFS,Paragon DOS IFS driver.
menuitem=PASSWORD,Change NT+ System Password.
menuitem=UNIFLASH,UNIFLASH.
SUBMENU=MENU,Main Menu <<<<

结果老是提示
Microsoft MS-DOS 7.1 Startup Menu
屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯

1. Start comuper. >>>
2. Start Disk System Manager >>>>
3. Start Data Recure >>
4. TW15 Chinese Support
5. Minimal Boot

Enter a choice: 3

There is an error in your CONFIG.SYS file on line 75
Press any key to continue . . .

[ Last edited by willsort on 2005-9-8 at 11:19 ]

Re dato:

你给出的CONFIG.SYS信息不全，且改动之前的内容也没有给出，比较难以判断。错误信息指出的75行我猜测应该是SUMMENU一行，其MENU项应该是试图指向主菜单，这是DOS语法所不允许的，子菜单必须是新建菜单项，不能回指。

如果想在启动过程中返回主菜单，只要按Backspace即可，不需要也不能通过子菜单跳转。

---------- Edited by willsort ----------
红色字体所示内容，经实际验证乃错误言论，敬请注意！
---------- Edited by willsort ----------

[ Last edited by willsort on 2005-9-8 at 08:36 ]

奇怪啊，原先红色的位置为
menuitem=READNTFS,READNTFS.
后来使用ifs了，结果只要将readntfs改名就会这样。我想这个名字难道会关连autoexec.bat吗，错误出得让人有点莫名其妙

config.sys

SUBMENU=DOS,Start comuper. >>>
SUBMENU=DISK,Start Disk System Manager >>>>
SUBMENU=DATA,Start Data Recure >>
menuitem=TW,TW15 Chinese Support
menuitem=QUICK, Minimal Boot
menudefault=NOCD,30
menucolor=8,0

;>>>>>>>>>><<<<<<<<<<
;>>>>>>>>>>DOS菜单项<<<<<<<<<<

menuitem=NOEM,Start computer without EM386 support.
menuitem=CD,Start computer with CD-ROM support.
menuitem=NOCD,Start computer with EM386 support.
menuitem=UP,Start computer with UMBPCI
SUBMENU=MENU,Main Menu <<<<

;>>>>>>>>>>DOS子菜单项<<<<<<<<<<

device=himem.sys /testmem

ff
files=10
buffers=10
dos=high,umb
stacks=9,256
devicehigh=ramdrive.sys /E 2048
lastdrive=z

include=COMM
devicehigh=VIDE-CDD.SYS /D:mscd001

include=COMM

device=HIMEM.SYS /testmem

ff
DEVICE=UMBPCI.SYS
DEVICE=LOWDMA.SYS
devicehigh=ramdrive.sys /E 2048
;>>>>>>>>>>DOS子菜单项结束<<<<<<<<<<
;>>>>>>>>>>DOS菜单项结束<<<<<<<<<<

;>>>>>>>>>>DISK菜单项<<<<<<<<<<

menuitem=diskgen,Disk Genius.
;menuitem=fbdisk,Fixed Bad Disk.
menuitem=fdisk,Winme fdisk.
;menuitem=kvfix,kvfix.
SUBMENU=MENU,Main Menu <<<<

include=COMM

include=COMM

include=COMM

include=COMM

;>>>>>>>>>>DISK菜单项结束<<<<<<<<<<

device=HIMEM.SYS /testmem

ff
DEVICE=UMBPCI.SYS
DEVICE=LOWDMA.SYS
devicehigh=ramdrive.sys /E 2048
;>>>>>>>>>>DATA菜单项<<<<<<<<<<

;menuitem=UNERASER,UNERASER.
menuitem=READNTFS,Paragon DOS IFS driver.
menuitem=PASSWORD,Change NT+ System Password.
menuitem=UNIFLASH,UNIFLASH.
SUBMENU=MENU,Main Menu <<<<

include=COMM

include=COMM

include=COMM

device=HIMEM.SYS /testmem

ff
;在Via apollo 133 pro上非常的遭糕
;DEVICE=UMBPCI.SYS
;DEVICE=LOWDMA.SYS
devicehigh=ramdrive.sys /E 2048

;>>>>>>>>>>DATA菜单项结束<<<<<<<<<<

;>>>>>>>>>>共用属性<<<<<<<<<<

device=HIMEM.SYS /testmem

ff
DEVICE=EMM386.EXE NOEMS
devicehigh=ramdrive.sys /E 2048
files=30
buffers=60
dos=high,umb
stacks=9,256
lastdrive=z

autoexec.bat

@ECHO OFF
IF "%config%"=="QUICK" GOTO QUICK
set EXPAND=YES
SET DIRCMD=/O:N
set LglDrv=27 * 26 Z 25 Y 24 X 23 W 22 V 21 U 20 T 19 S 18 R 17 Q 16 P 15
set LglDrv=%LglDrv% O 14 N 13 M 12 L 11 K 10 J 9 I 8 H 7 G 6 F 5 E 4 D 3 C
cls
call setramd.bat %LglDrv%
IF NOT EXIST %RAMD%:\temp\NUL MD %RAMD%:\TEMP
set temp=%RAMD%:\TEMP
set tmp=%RAMD%:\TEMP
path=%RAMD%:\;%RAMD%:\boot;%RAMD%:\driver;%RAMD%:\temp;%RAMD%:\tw\;a:\;%CDROM%:\
copy command.com %RAMD%:\ > NUL
set comspec=%RAMD%:\command.com
copy extract.exe %RAMD%:\ > NUL

:ERROR
IF EXIST ebd.cab GOTO EXT
echo Please insert Windows 98 Startup Disk 2
echo.
pause
GOTO ERROR

:EXT
%RAMD%:\extract /y /e /l %RAMD%: ebd.cab > NUL
%RAMD%:\extract /y /e /l %RAMD%:\boot a:\boot.cab > NUL
%RAMD%:\extract /y /e /l %RAMD%:\driver a:\driver.cab > NUL
LH %RAMD%:\DOSKEY
CLS
echo The diagnostic tools were successfully loaded to drive %RAMD%.
echo.

:: >>>>>>>>>>CONFIG<<<<<<<<<<

GOTO %CONFIG%

:: >>>>>>>>>>DOS选项<<<<<<<<<<
:NOEM
GOTO QUIT

:CD
LH %ramd%:\shsucdx.com /D:mscd001 /L:%CDROM%
::If MSCDEX doesn't find a drive...
IF ERRORLEVEL 1 SET CDPROB=1
::
call fixit.bat
rem clean up environment variables
set CDPROB=
set CDROM=
GOTO QUIT

:NOCD
GOTO QUIT

:UP
GOTO QUIT

:: >>>>>>>>>>DOS选项<<<<<<<<<<
:: >>>>>>>>>>DISK菜单项<<<<<<<<<<

:diskgen
call diskgen.bat
GOTO QUICK

:kvfix
call kvfix.bat
GOTO QUICK

:fbdisk
call fbdisk
GOTO QUICK

:fdisk
call fdisk.bat
GOTO QUICK

:: >>>>>>>>>>DISK菜单项<<<<<<<<<<

:TW
call TW.bat
GOTO QUICK

:: >>>>>>>>>>DATA菜单项<<<<<<<<<<

:UNERASER
call UNERASER.bat
GOTO QUICK

:READNTFS
call NTFS.bat
GOTO QUICK

ASSWORD
call PASSWORD.bat
GOTO QUICK

:UNIFLASH
call uflash.bat
GOTO QUICK

:: >>>>>>>>>>DATA菜单项<<<<<<<<<<

:: >>>>>>>>>>CONFIG END<<<<<<<<<<

:QUIT
rem clean up environment variables
set LglDrv=
GOTO QUICK

:QUICK
echo.
echo Start computer with CD-ROM support.
WRITEXT 0+ 1 "Please " -f6 "type Instcd and press ENTER."
echo.

晕，这个问题真是莫名其妙。就修改了一下就怎么会出这种问题，编辑器用的是editplus2。上传了一张new_err.zip在http://dato.ys168.com

Microsoft MS-DOS 7.1 Startup Menu
屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯

1. Start comuper. >>>
2. Start Disk System Manager >>>>
3. Start Data Recure >>
4. TW15 Chinese Support
5. Minimal Boot

Enter a choice: 3

一旦选择3.start data recure就会提示

There is an error in your CONFIG.SYS file on line 76
Press any key to continue . . .

正在比较文件 autoexec.bat 和 AUTOEXEC1.BAT
***** autoexec.bat

:READNTFS
call READNTFS.bat
GOTO QUICK
***** AUTOEXEC1.BAT

:IFS
call IFS.bat
GOTO QUICK
*****

正在比较文件 config.sys.txt 和 CONFIG1.SYS.TXT
***** config.sys.txt
;menuitem=UNERASER,UNERASER.
menuitem=READNTFS,READNTFS.
menuitem=PASSWORD,Change NT+ System Password.
***** CONFIG1.SYS.TXT
;menuitem=UNERASER,UNERASER.
menuitem=IFS,IFS.
menuitem=PASSWORD,Change NT+ System Password.
*****

Re dato:

问题在于你没有将下面的菜单项的名字改为，改过之后 CONFIG.SYS 就可以正常启动了。不过在后面的 AUTOEXEC.BAT 执行过程中又出现了问题，应该是没有 IFS.BAT 的原因。

另外，我在2楼所说的子菜单不能回指主菜单经过实际测试是错误言论，当时我并没有进行测试，只是凭臆想做出判断。在此更正且向 dato 兄表示道歉！也敬请其它读者谅解！

谢谢版主哦，

正在比较文件 config.sys.txt 和 CONFIG1.SYS.TXT
***** config.sys.txt
;menuitem=UNERASER,UNERASER.
menuitem=READNTFS,READNTFS.
menuitem=PASSWORD,Change NT+ System Password.
***** CONFIG1.SYS.TXT
;menuitem=UNERASER,UNERASER.
menuitem=IFS,Paragon DOS IFS driver.
menuitem=PASSWORD,Change NT+ System Password.
*****

***** config.sys.txt

include=COMM
***** CONFIG1.SYS.TXT

include=COMM
*****

正在比较文件 autoexec.bat 和 AUTOEXEC1.BAT
***** autoexec.bat

:READNTFS
call READNTFS.bat
GOTO QUICK
***** AUTOEXEC1.BAT

:IFS
call NTFS.bat
GOTO QUICK
*****

第1楼　dato	发表于 2005-09-06 23:54
高级用户　发帖 377　积分 916
（已结）请问menuitem有特殊的要求吗 menuitem=READNTFS,READNTFS. menuitem=PASSWORD,Change NT+ System Password. menuitem=UNIFLASH,UNIFLASH. SUBMENU=MENU,Main Menu <<<< 改为下面的,看起来也没有什么吗,难道小小的DOS也会对单词敏感吗，试图改为123456凑足6位数也无法解决，真是见鬼。 menuitem=IFS,Paragon DOS IFS driver. menuitem=PASSWORD,Change NT+ System Password. menuitem=UNIFLASH,UNIFLASH. SUBMENU=MENU,Main Menu <<<< 结果老是提示 Microsoft MS-DOS 7.1 Startup Menu 屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯 1. Start comuper. >>> 2. Start Disk System Manager >>>> 3. Start Data Recure >> 4. TW15 Chinese Support 5. Minimal Boot Enter a choice: 3 There is an error in your CONFIG.SYS file on line 75 Press any key to continue . . . [ Last edited by willsort on 2005-9-8 at 11:19 ]

第2楼　willsort	发表于 2005-09-07 17:44
元老会员　发帖 1,512　积分 4,432
Re dato: 你给出的CONFIG.SYS信息不全，且改动之前的内容也没有给出，比较难以判断。错误信息指出的75行我猜测应该是SUMMENU一行，其MENU项应该是试图指向主菜单，这是DOS语法所不允许的，子菜单必须是新建菜单项，不能回指。如果想在启动过程中返回主菜单，只要按Backspace即可，不需要也不能通过子菜单跳转。 ---------- Edited by willsort ---------- 红色字体所示内容，经实际验证乃错误言论，敬请注意！ ---------- Edited by willsort ---------- [ Last edited by willsort on 2005-9-8 at 08:36 ]

第3楼　dato	发表于 2005-09-07 21:36
高级用户　发帖 377　积分 916
奇怪啊，原先红色的位置为 menuitem=READNTFS,READNTFS. 后来使用ifs了，结果只要将readntfs改名就会这样。我想这个名字难道会关连autoexec.bat吗，错误出得让人有点莫名其妙 config.sys SUBMENU=DOS,Start comuper. >>> SUBMENU=DISK,Start Disk System Manager >>>> SUBMENU=DATA,Start Data Recure >> menuitem=TW,TW15 Chinese Support menuitem=QUICK, Minimal Boot menudefault=NOCD,30 menucolor=8,0 ;>>>>>>>>>><<<<<<<<<< ;>>>>>>>>>>DOS菜单项<<<<<<<<<< menuitem=NOEM,Start computer without EM386 support. menuitem=CD,Start computer with CD-ROM support. menuitem=NOCD,Start computer with EM386 support. menuitem=UP,Start computer with UMBPCI SUBMENU=MENU,Main Menu <<<< ;>>>>>>>>>>DOS子菜单项<<<<<<<<<< device=himem.sys /testmemff files=10 buffers=10 dos=high,umb stacks=9,256 devicehigh=ramdrive.sys /E 2048 lastdrive=z include=COMM devicehigh=VIDE-CDD.SYS /D:mscd001 include=COMM device=HIMEM.SYS /testmemff DEVICE=UMBPCI.SYS DEVICE=LOWDMA.SYS devicehigh=ramdrive.sys /E 2048 ;>>>>>>>>>>DOS子菜单项结束<<<<<<<<<< ;>>>>>>>>>>DOS菜单项结束<<<<<<<<<< ;>>>>>>>>>>DISK菜单项<<<<<<<<<< menuitem=diskgen,Disk Genius. ;menuitem=fbdisk,Fixed Bad Disk. menuitem=fdisk,Winme fdisk. ;menuitem=kvfix,kvfix. SUBMENU=MENU,Main Menu <<<< include=COMM include=COMM include=COMM include=COMM ;>>>>>>>>>>DISK菜单项结束<<<<<<<<<< device=HIMEM.SYS /testmemff DEVICE=UMBPCI.SYS DEVICE=LOWDMA.SYS devicehigh=ramdrive.sys /E 2048 ;>>>>>>>>>>DATA菜单项<<<<<<<<<< ;menuitem=UNERASER,UNERASER. menuitem=READNTFS,Paragon DOS IFS driver. menuitem=PASSWORD,Change NT+ System Password. menuitem=UNIFLASH,UNIFLASH. SUBMENU=MENU,Main Menu <<<< include=COMM include=COMM include=COMM device=HIMEM.SYS /testmemff ;在Via apollo 133 pro上非常的遭糕 ;DEVICE=UMBPCI.SYS ;DEVICE=LOWDMA.SYS devicehigh=ramdrive.sys /E 2048 ;>>>>>>>>>>DATA菜单项结束<<<<<<<<<< ;>>>>>>>>>>共用属性<<<<<<<<<< device=HIMEM.SYS /testmemff DEVICE=EMM386.EXE NOEMS devicehigh=ramdrive.sys /E 2048 files=30 buffers=60 dos=high,umb stacks=9,256 lastdrive=z autoexec.bat @ECHO OFF IF "%config%"=="QUICK" GOTO QUICK set EXPAND=YES SET DIRCMD=/O:N set LglDrv=27 * 26 Z 25 Y 24 X 23 W 22 V 21 U 20 T 19 S 18 R 17 Q 16 P 15 set LglDrv=%LglDrv% O 14 N 13 M 12 L 11 K 10 J 9 I 8 H 7 G 6 F 5 E 4 D 3 C cls call setramd.bat %LglDrv% IF NOT EXIST %RAMD%:\temp\NUL MD %RAMD%:\TEMP set temp=%RAMD%:\TEMP set tmp=%RAMD%:\TEMP path=%RAMD%:\;%RAMD%:\boot;%RAMD%:\driver;%RAMD%:\temp;%RAMD%:\tw\;a:\;%CDROM%:\ copy command.com %RAMD%:\ > NUL set comspec=%RAMD%:\command.com copy extract.exe %RAMD%:\ > NUL :ERROR IF EXIST ebd.cab GOTO EXT echo Please insert Windows 98 Startup Disk 2 echo. pause GOTO ERROR :EXT %RAMD%:\extract /y /e /l %RAMD%: ebd.cab > NUL %RAMD%:\extract /y /e /l %RAMD%:\boot a:\boot.cab > NUL %RAMD%:\extract /y /e /l %RAMD%:\driver a:\driver.cab > NUL LH %RAMD%:\DOSKEY CLS echo The diagnostic tools were successfully loaded to drive %RAMD%. echo. :: >>>>>>>>>>CONFIG<<<<<<<<<< GOTO %CONFIG% :: >>>>>>>>>>DOS选项<<<<<<<<<< :NOEM GOTO QUIT :CD LH %ramd%:\shsucdx.com /D:mscd001 /L:%CDROM% ::If MSCDEX doesn't find a drive... IF ERRORLEVEL 1 SET CDPROB=1 :: call fixit.bat rem clean up environment variables set CDPROB= set CDROM= GOTO QUIT :NOCD GOTO QUIT :UP GOTO QUIT :: >>>>>>>>>>DOS选项<<<<<<<<<< :: >>>>>>>>>>DISK菜单项<<<<<<<<<< :diskgen call diskgen.bat GOTO QUICK :kvfix call kvfix.bat GOTO QUICK :fbdisk call fbdisk GOTO QUICK :fdisk call fdisk.bat GOTO QUICK :: >>>>>>>>>>DISK菜单项<<<<<<<<<< :TW call TW.bat GOTO QUICK :: >>>>>>>>>>DATA菜单项<<<<<<<<<< :UNERASER call UNERASER.bat GOTO QUICK :READNTFS call NTFS.bat GOTO QUICK ASSWORD call PASSWORD.bat GOTO QUICK :UNIFLASH call uflash.bat GOTO QUICK :: >>>>>>>>>>DATA菜单项<<<<<<<<<< :: >>>>>>>>>>CONFIG END<<<<<<<<<< :QUIT rem clean up environment variables set LglDrv= GOTO QUICK :QUICK echo. echo Start computer with CD-ROM support. WRITEXT 0+ 1 "Please " -f6 "type Instcd and press ENTER." echo.

第4楼　dato	发表于 2005-09-07 22:01
高级用户　发帖 377　积分 916
晕，这个问题真是莫名其妙。就修改了一下就怎么会出这种问题，编辑器用的是editplus2。上传了一张new_err.zip在http://dato.ys168.com Microsoft MS-DOS 7.1 Startup Menu 屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯 1. Start comuper. >>> 2. Start Disk System Manager >>>> 3. Start Data Recure >> 4. TW15 Chinese Support 5. Minimal Boot Enter a choice: 3 一旦选择3.start data recure就会提示 There is an error in your CONFIG.SYS file on line 76 Press any key to continue . . . 正在比较文件 autoexec.bat 和 AUTOEXEC1.BAT *** autoexec.bat :READNTFS call READNTFS.bat GOTO QUICK * AUTOEXEC1.BAT :IFS call IFS.bat GOTO QUICK * 正在比较文件 config.sys.txt 和 CONFIG1.SYS.TXT * config.sys.txt ;menuitem=UNERASER,UNERASER. menuitem=READNTFS,READNTFS. menuitem=PASSWORD,Change NT+ System Password. * CONFIG1.SYS.TXT ;menuitem=UNERASER,UNERASER. menuitem=IFS,IFS. menuitem=PASSWORD,Change NT+ System Password. ***

第5楼　willsort	发表于 2005-09-08 08:31
元老会员　发帖 1,512　积分 4,432
Re dato: 问题在于你没有将下面的菜单项的名字改为，改过之后 CONFIG.SYS 就可以正常启动了。不过在后面的 AUTOEXEC.BAT 执行过程中又出现了问题，应该是没有 IFS.BAT 的原因。另外，我在2楼所说的子菜单不能回指主菜单经过实际测试是错误言论，当时我并没有进行测试，只是凭臆想做出判断。在此更正且向 dato 兄表示道歉！也敬请其它读者谅解！

第6楼　dato	发表于 2005-09-08 10:43
高级用户　发帖 377　积分 916
谢谢版主哦，正在比较文件 config.sys.txt 和 CONFIG1.SYS.TXT *** config.sys.txt ;menuitem=UNERASER,UNERASER. menuitem=READNTFS,READNTFS. menuitem=PASSWORD,Change NT+ System Password. * CONFIG1.SYS.TXT ;menuitem=UNERASER,UNERASER. menuitem=IFS,Paragon DOS IFS driver. menuitem=PASSWORD,Change NT+ System Password. * * config.sys.txt include=COMM * CONFIG1.SYS.TXT include=COMM * 正在比较文件 autoexec.bat 和 AUTOEXEC1.BAT * autoexec.bat :READNTFS call READNTFS.bat GOTO QUICK * AUTOEXEC1.BAT :IFS call NTFS.bat GOTO QUICK ***