|
newpeople
初级用户
 
积分 133
发帖 5
注册 2005-1-11
状态 离线
|
『楼 主』:
[分享]自制的23M大容量软盘镜像终于在vmware中成功实现引导!
使用 LLM 解释/回答一下
问题的由来见 2005-1-15 20:33 newpeople发表的“ 用WinImage7做的23M软盘为何不能引导?”
要先用WinImage7做一个1.44M软盘镜像,然后在“映像”→“更改格式”中改成自己所要的容量(我做的有23M,往这个镜像中添加了17M文件),其它不要动。
这样做成的镜像在vmware可成功引导,用Nero刻成ISO文件也能引导。
The origin of the problem can be found in the post "Why can't the 23M floppy disk made with WinImage7 boot?" published by newpeople at 20:33 on 2005-1-15.
First, you need to use WinImage7 to make a 1.44M floppy disk image, and then change the format in "Image" → "Change Format" to the capacity you want (I made one with 23M, and added 17M files to this image), and don't move anything else.
The image made in this way can be successfully booted in VMware, and the ISO file burned with Nero can also be booted.
|
|
2005-1-16 00:00 |
|
|
JonePeng
金牌会员
      D◎$ Fαп
积分 4562
发帖 1883
注册 2004-1-19 来自 广东广州
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
恭喜!!原来7.0以上版本的WinImage才可以制作大容量IMG。
Congratulations! ! Only WinImage versions above 7.0 can be used to create large-capacity IMG.
|

----====≡≡≡≡ 我的至爱,永远是MSDOS!≡≡≡≡====----
|
|
2005-1-17 00:00 |
|
|
jssyq
银牌会员
    
积分 1231
发帖 498
注册 2002-12-3
状态 离线
|
『第 3 楼』:
使用 LLM 解释/回答一下
请问如何自定义。我要扩大到8M怎么弄。请指教【越详细越好】谢谢
Please tell me how to customize. I want to expand to 8M. Please give me detailed instructions. Thank you
|

言多必失!必失!!油多菜不坏,礼多人不怪 |
|
2005-1-19 00:00 |
|
|
newpeople
初级用户
 
积分 133
发帖 5
注册 2005-1-11
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
这两天工作实在太忙了,过几天再发个详细的贴子。不过我发现大容量映像中子文件夹中的文件似乎不能用,还有其它一些问题,弄清楚再发贴吧。
These two days, work is really too busy. I'll post a detailed post in a few days. But I found that files in subfolders in large-capacity images seem to not work, and there are other issues. I'll post after figuring it out.
|
|
2005-1-20 00:00 |
|
|
jssyq
银牌会员
    
积分 1231
发帖 498
注册 2002-12-3
状态 离线
|
|
2005-1-20 00:00 |
|
|
newpeople
初级用户
 
积分 133
发帖 5
注册 2005-1-11
状态 离线
|
『第 6 楼』:
使用 LLM 解释/回答一下
制作大容量软盘映像的方法:
1、先制作1,44M的软盘映像:打开WinImage7,在“文件”→“新建”中选择“1.44M”(默认选项),点“确定”。然后在“映像”→“引导扇区属性”中选“Windows95/98”,点“确定”。保存为“ima”映像文件(不要保存为默认的“imz”格式。
2、打开WinImage7,选中并打开刚建立的1.44M映像,选“映像”→“更改格式”,选“选择自定义映像格式”,在“扇区总数”中通过更改扇区总数改变映像大小。一扇区为512字节(0.5KB),8M占1024X8=8192K,按1:0.5=X:8129,X为16384个扇区。要做8M的映像只需把“扇区总数”改为16384,点“确定”,保存该ima文件。这个文件就是你想制作的8M软盘映像,往其中添入启动文件即可。
制作的映像在vmware中可引导,但使用映像中的程序会出错。用Nero把该映像做成ISO文件后,在vmware中可引导,且可使用映像中的程序。总之,按上述方法做成ISO文件比直接用ima文件问题少一些(在vmware中试验)。
我还没有刻成光盘,不清楚这种映像在真实机器上的使用情况。过段日子刻成盘后再反馈一下。
Methods for creating large-capacity floppy disk images:
1. First, create a 1.44M floppy disk image: Open WinImage7, select "1.44M" (default option) in "File" → "New", and click "OK". Then, in "Image" → "Boot Sector Properties", select "Windows95/98", click "OK". Save it as an "ima" image file (do not save it in the default "imz" format.
2. Open WinImage7, select and open the newly created 1.44M image, select "Image" → "Change Format", select "Select Custom Image Format", and change the total number of sectors in "Total Sectors" to change the image size. One sector is 512 bytes (0.5KB). 8M is 1024X8 = 8192K. According to 1:0.5 = X:8129, X is 16384 sectors. To make an 8M image, just change the "Total Sectors" to 16384, click "OK", and save the ima file. This file is the 8M floppy disk image you want to create, and you can add boot files to it.
The created image can be booted in VMware, but there will be errors when using the programs in the image. After making this image into an ISO file with Nero, it can be booted in VMware and the programs in the image can be used. In conclusion, making it into an ISO file according to the above method has fewer problems than directly using the ima file (tested in VMware).
I haven't burned it to a CD yet, so I'm not sure about the usage of this image on a real machine. I'll give feedback after burning it to a disk in a few days.
|
|
2005-1-21 00:00 |
|
|
newpeople
初级用户
 
积分 133
发帖 5
注册 2005-1-11
状态 离线
|
『第 7 楼』:
使用 LLM 解释/回答一下
已把23M软盘映像刻成光盘启动盘了,可以引导。在IDE口的光驱中启动后使用一切正常,但在USB光驱中使用有些问题。
The 23M floppy disk image has been burned into a CD boot disk and can boot. After booting in the IDE port CD-ROM, everything works normally, but there are some issues when using it in a USB CD-ROM.
|
|
2005-1-29 00:00 |
|
|
lizhenduo
初级用户
 
积分 190
发帖 29
注册 2003-6-24
状态 离线
|
『第 8 楼』:
使用 LLM 解释/回答一下
Originally posted by newpeople at 2005-1-16 12:00 AM:
问题的由来见 2005-1-15 20:33 newpeople发表的“ 用WinImage7做的23M软盘为何不能引导?”
要先用WinImage7做一个1.44M软盘镜像,然后在“映像”→“更改栠...
刻成光盘能引导吗?如果能,是否虚拟成A:盘了?A:盘能定义成23M吗?
Last edited by lizhenduo on 2005-7-29 at 12:31 ]
Originally posted by newpeople at 2005-1-16 12:00 AM:
The origin of the problem can be found in the "Why can't the 23M floppy disk made with WinImage7 boot?" posted by newpeople at 20:33 on 2005-1-15.
First, you need to use WinImage7 to make a 1.44M floppy disk image, then in "Image" -> "Change volume... Can it boot when burned to a CD? If it can, is it virtualized as drive A:? Can drive A: be defined as 23M?
Last edited by lizhenduo on 2005-7-29 at 12:31 ]
|
|
2005-7-29 12:29 |
|
|
stampede
初级用户
 
积分 128
发帖 4
注册 2003-8-19
状态 离线
|
『第 9 楼』:
使用 LLM 解释/回答一下
原来现在已可以这样做了,这样真要来试试做一个超过2.88的软盘映像看看
So it turns out it can be done like this now. I really need to try making a floppy disk image larger than 2.88.
|
|
2005-8-5 23:22 |
|
|
Climbing
铂金会员
       网络独行侠
积分 6962
发帖 2753
注册 2003-4-16 来自 河北保定
状态 离线
|
『第 10 楼』:
使用 LLM 解释/回答一下
我一直用grub + memdisk引导大容量的软盘映像文件,用Winimage 7.0或者EasyBoot都可以制做大容量的软盘映像,当然,要搞清楚软盘的C、H、S参数。
I have been using grub + memdisk to boot large-capacity floppy disk image files. Both Winimage 7.0 or EasyBoot can be used to create large-capacity floppy disk images. Of course, you need to figure out the C, H, S parameters of the floppy disk.
|

偶只喜欢回答那些标题和描述都很清晰的帖子!
如想解决问题,请认真学习“这个帖子”和“这个帖子”并努力遵守,如果可能,请告诉更多的人!
|
|
2005-8-6 11:28 |
|
|
tianyan46
初级用户
 
积分 52
发帖 47
注册 2005-9-2
状态 离线
|
『第 11 楼』:
使用 LLM 解释/回答一下
kongling00.ys168.com 提供下载
kongling00.ys168.com provides downloads
|
|
2005-9-2 08:42 |
|
|
mtx
初级用户
 
积分 187
发帖 21
注册 2005-1-22
状态 离线
|
『第 12 楼』:
使用 LLM 解释/回答一下
Originally posted by Climbing at 2005-8-6 11:28 AM:
我一直用grub + memdisk引导大容量的软盘映像文件,用Winimage 7.0或者EasyBoot都可以制做大容量的软盘映像,当然,要搞清楚软盘的C、H、S参数。
软盘的参数可以介绍一下吗?谢谢
Originally posted by Climbing at 2005-8-6 11:28 AM:
I've been using grub + memdisk to boot large floppy disk image files. Both Winimage 7.0 or EasyBoot can be used to create large floppy disk images. Of course, you need to figure out the C, H, S parameters of the floppy disk.
Can you introduce the parameters of the floppy disk? Thanks
|
|
2006-1-9 08:51 |
|