中国DOS联盟

There are also folders under the 123 folder (and there is content), I don't have a screenshot. Please try again for me.

I uploaded the XCOPY extracted from DOSCP in WinImage. Please help me check if this XCOPY is normal. It would be best if you use this XCOPY I uploaded to do a test. Thanks!

Originally posted by jcyncz at 2006-6-18 10:26 AM:
There are still folders in the 123 folder (and there is content), but I don't have a screenshot. Please try again.

Having folders and files under a folder is not a problem at all. Now, in my C:\toolkit folder, there is the entire expanded PowerQuest Deploy Toolkit software package, which contains many files and folders (including long filenames). Now I copy it to the D:\456 folder. The D:\456 folder does not exist yet (the previous one has been deleted). I use the XCOPY command line parameter /I to directly set D:\456 as the target folder to be automatically created and copied (so that I don't have to enter D when prompted later), and specify the /E parameter (that is, also copy empty folders), the /H parameter (that is, also copy hidden files). Now enter the following command:

A:\>XCOPY C:\toolkit\*.* D:\456 /S/E/H/I
Deploy Toolkit manual.pdf
PARTINFO\Dos\PartInfo.exe
PARTINFO\Linux\PartInfo
PARTINFO\Win\PartIn9x.exe
PARTINFO\Win\PartInNT.exe
PQA\Dos\PqaBldD.exe
PQA\Dos\PqaBldD.rtc
PQA\Dos\PqaDplyD.exe
PQA\Dos\PqaDplyD.rtc
PQA\Linux\pqabuild
PQA\Linux\pqabuild.rtc
PQA\Linux\pqadeploy
PQA\Linux\pqadeploy.rtc
PQA\Win\PqaBuild9x.exe
PQA\Win\PqaBuild9x.rtc
PQA\Win\PqaBuildNt.exe
PQA\Win\PqaBuildNt.rtc
PQA\Win\PqaDeploy9x.exe
PQA\Win\PqaDeploy9x.rtc
PQA\Win\PqaDeployNt.exe
PQA\Win\PqaDeployNt.rtc
PQACCESS\Dos\PqAccD.exe
PQACCESS\Dos\PqAccD.rtc
PQACCESS\Linux\pqaccess
PQACCESS\Linux\pqaccess.rtc
PQACCESS\Win\PQAccess9x.exe
PQACCESS\Win\PQAccess9x.rtc
PQACCESS\Win\PQAccessNT.exe
PQACCESS\Win\PQAccessNT.rtc
PQDISK\Dos\PqDisk.exe
PQDISK\Linux\PqDisk
PQDISK\Win\PqDisk9X.exe
PQDISK\Win\PqDiskNT.exe
PQDISK\Win\PQVXD.vxd
PQIDEPLOY\Dos\PQIDplyD.exe
PQIDEPLOY\Dos\PQIDplyD.rtc
PQIDEPLOY\Linux\pqideploy
PQIDEPLOY\Linux\pqideploy.rtc
PQIDEPLOY\Win\PQIDeploy.exe
PQIDEPLOY\Win\PQIDeploy.rtc
PQIEXTRACT\Dos\PqiExtD.exe
PQIEXTRACT\Dos\PqiExtD.rtc
PQIEXTRACT\Linux\pqiextract
PQIEXTRACT\Linux\pqiextract.rtc
PQIEXTRACT\Win\PqiExt9x.exe
PQIEXTRACT\Win\PqiExt9x.rtc
PQIEXTRACT\Win\PqiExtNT.exe
PQIEXTRACT\Win\PqiExtNT.rtc
PQQUERY\Dos\PqQuery.exe
PQQUERY\Win\PqQuery32.exe
PTEDIT\Dos\PtEditD.exe
PTEDIT\Win\PQBOOT32.exe
PTEDIT\Win\PtEdit32.exe
VBE\CALDERA.MBR
VBE\PQVXD.vxd
VBE\REBOOT.COM
VBE\restrmbr.exe
VBE\SAMPLE.VFD
VBE\VFile.exe
VBE\VFileX.exe
VBE\vfinst9x.exe
VBE\VFINSTD.EXE
VBE\VFInstNT.dll
VBE\VFInstNT.exe
VBE\VFLOPPY.SYS
VBE\VFLPPYLD.SYS
VBE\VFRSTMBR.COM
VBE\Linux\vfinstlx
68 File(s) copied

A:\>

The result is completely normal!

Webmaster, have you used the XCOPY program I uploaded? Please try the XCOPY I sent and see if there's something wrong with my XCOPY! Thanks

Originally posted by jcyncz at 2006-6-18 10:50 AM:
Webmaster, have you used the XCOPY program I uploaded? Please try the XCOPY I uploaded and see if there's something wrong with this XCOPY of mine! Thanks

I just did a binary comparison with FC, and it seems the same. Well, you can try other folders and see how it goes. Also, please pay attention to any error messages.

I have also tried other folders, and it's the same. You'd better use the XCOPY I uploaded to test in pure DOS, make a test of copying several folders with subfolders. Also, I suspect that this XCOPY program of mine is abnormal. Could you please send me your XCOPY to use and see if it can be used normally? Thanks.

It has been tried, and it is completely normal. And the files are exactly the same, so it must have nothing to do with the files themselves. Didn't you see any error messages when you copied?

Webmaster, there is no error message, and it can be copied. However, what is copied over is a file - xls, and the folders under it are not copied over.

Have you tried the parameters I used above (such as /S/E/H/I)?

The file copied over is a long horizontal line followed by XLS, like this: ————xls. And there are no error messages at all. I don't know what's going on.

/S/E/H/I, I haven't used this parameter before, I'm using /s. I'll try it again. Thanks

I tried the parameters /s/e/h/i you gave again. It still doesn't work. It shows:
--------BOOK.XLS
-------.XLS
Error copying file c:\123\-------.XLS to G:\456\--------.xls
Msg id:00000002
1 File(s) copied
A:\﹥
But I was copying Chinese files and Chinese folders.

Originally posted by jcyncz at 2006-6-18 11:45 AM:
Error copying file c:\123\-------.XLS to G:\456\--------.xls
Msg id:00000002

This is just an error message. It can be seen that an error occurred during copying, causing the stop, which is completely different from being unable to copy for no reason. With this, it is easier to locate the problem. Chinese files and Chinese folders can also be copied normally (I have confirmed it just now), but the fact that your file name is displayed as an underscore instead of Chinese indicates that the code page for long Chinese file names is not loaded correctly (this has nothing to do with XCOPY, but is a problem with the code page for long file names). You can first try to copy a directory without Chinese files and Chinese folders. If there is no problem, then try to solve the problem of the code page for long Chinese file names to copy Chinese folders.

How to solve this: The code page for long Chinese filenames was not loaded correctly, an issue with the code page for long filenames. But I used an XCOPY copied from this forum and it works normally, just that the full Chinese filenames can't be displayed. How to solve this long filename code problem? Please help me, thank you!

Last edited by jcyncz on 2006-6-18 at 12:00 ]

Originally posted by jcyncz at 2006-6-18 11:56 AM:
How to solve this: The code page for long Chinese filenames was not loaded correctly, the issue of the code page for long filenames. Please help me, thank you

Last edited by jcyncz on 2006-6-18 at 11:57 ]

Didn't I tell you to first copy the English folder to test it? It's best to solve the problems one by one. Wait until the English is okay and then deal with the Chinese. Previously on the forum, another XCOPY didn't support long filenames, so only short filenames could be used. The storage methods of the two are completely different, so it's a completely different matter and should not be confused.