|
louzhuwei
初级用户
积分 20
发帖 8
注册 2007-9-2
状态 离线
|
『楼 主』:
[求助]MAXDOS V6硬盘版config.sys里的中文改过后无法启动
使用 LLM 解释/回答一下
原版如下图：
改过以后，第一行多加了“飞翔科技专用”，但改过以后只有F项，纯DOS模式能进入，其它的几项选中后回车机器就重启了。如下图
制作时命令如下，在纯DOS下
d:\vtmagic /t config.sys
生成config.exe 和 config.new 文件，把config.new 改为config.sys添加进maxs.sys 文件里面。ConMenu.sys这个文件没有修改，还是maxdos里面的。
这个问题困扰我多少天了，一直搞不定，请问各位大哥，是哪里出问题了，小弟不胜感激，跪谢了
The original version is as follows:
After modification, the first line has an additional "Special for Feixiang Technology", but after modification, there is only option F, and it can enter the pure DOS mode. When the other options are selected and pressed Enter, the machine restarts. As shown in the following figure
The commands during production are as follows, in pure DOS:
d:\vtmagic /t config.sys
Generate config.exe and config.new files, change config.new to config.sys and add it into the maxs.sys file. The ConMenu.sys file is not modified and is still the one in maxdos.
This problem has troubled me for several days and I can't solve it. Please,各位大哥, where is the problem? Little brother is very grateful, kneels and thanks.
|
|
 2007-12-28 14:03 |
|
|
人类
中级用户
积分 306
发帖 81
注册 2003-5-10
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
已回信到你的QQ邮箱
The email has been sent to your QQ mailbox.
|
玩DOS，还是我76年出生的人熟... |
|
|
2007-12-31 00:38 |
|
|
azzxs
新手上路
积分 8
发帖 4
注册 2007-12-17
状态 离线
|
『第 3 楼』:
使用 LLM 解释/回答一下
能不能告诉我，V6pxe版本里面的menu.BAT，CONFIG.sys怎么修改，这2个文件可能加密了，用记事本打开全是乱码？或者帮我写一个，我想改变菜单的循序
Can you tell me how to modify menu.BAT and CONFIG.sys in the V6pxe version? These two files may be encrypted, and when opened with Notepad, it's all garbled? Or can you write one for me? I want to change the order of the menu.
|
|
|
2008-1-2 15:55 |
|
|
qiujincong
新手上路
积分 17
发帖 10
注册 2007-12-18
状态 离线
|
|
|
2008-1-7 02:41 |
|
|
buggub
初级用户
积分 20
发帖 8
注册 2008-1-10
状态 离线
|
|
|
2008-1-10 23:13 |
|
|
ndzengwei
新手上路
积分 4
发帖 2
注册 2008-1-13
状态 离线
|
『第 6 楼』:
使用 LLM 解释/回答一下
『第 3 楼』:
能不能告诉我，V6pxe版本里面的menu.BAT，CONFIG.sys怎么修改，这2个文件可能加密了，用记事本打开全是乱码？或者帮我写一个，我想改变菜单的循序
同三楼问
『3rd Floor』:
Can you tell me how to modify menu.BAT and CONFIG.sys in the V6pxe version? These two files may be encrypted, and when opened with Notepad, it's all garbled? Or can you write one for me? I want to change the order of the menu
|
|
|
2008-1-13 01:15 |
|
|
ndzengwei
新手上路
积分 4
发帖 2
注册 2008-1-13
状态 离线
|
|
|
2008-1-13 01:16 |
|
|
maxfull
中级用户
积分 360
发帖 120
注册 2005-7-14
状态 离线
|
『第 8 楼』:
使用 LLM 解释/回答一下
垃圾人物，尊重他人劳动成果都不懂，再怎么改人家都知道你是改别的作品，不如自己写个。
Scumbag, don't even know to respect others' labor results. No matter how you modify it, people will know you're modifying someone else's work. It's better to write your own.
|
|
|
2008-1-14 18:47 |
|
|
yangjianzj
初级用户
积分 42
发帖 20
注册 2007-10-19
状态 离线
|
『第 9 楼』:
使用 LLM 解释/回答一下
你也别说V6是原创.....他也是改自诺顿ghost8.0网络版里面网络启动盘的创意而已!
只是v6使用方便一点而已,难道一定要拜他啊!
Last edited by yangjianzj on 2008-1-15 at 10:04 AM ]
You also can't say that V6 is original.....It's just that it's modified from the idea of the network boot disk in Norton Ghost 8.0 network version!
It's just that V6 is a bit more convenient to use, does it have to be worshipped!
Last edited by yangjianzj on 2008-1-15 at 10:04 AM ]
|
|
|
2008-1-15 10:03 |
|
|
buggub
初级用户
积分 20
发帖 8
注册 2008-1-10
状态 离线
|
『第 10 楼』:
使用 LLM 解释/回答一下
呵呵Maxdos就是原创了？真正原创的话应该写一个全新的Ghost啊，怎么还用人家的Ghost软件呢？
本人将maxdos V6文件的核心文件重命名为.img文件，使用winimg进行编辑。
修改了maxdos中的config.sys文件，将原始config.sys文件转换成为中文，然后使用VTMAGIC520生成config.exe和config.new文件，将config.new文件重命名为config.sys后添加到maxdos文件中，config.exe一起进行了拷贝。
但使用该文件引导后，发现机器自动重启。
我使用pause键后看到重启原因为stacks溢出，修改stack也无效，请问如何解决？
请高手解决一下。不胜感激！！！
Hehe, is Maxdos original? If it's truly original, it should write a brand-new Ghost. Why still use someone else's Ghost software?
I renamed the core files of the Maxdos V6 file to.img files and edited them with Winimg.
I modified the config.sys file in Maxdos, converted the original config.sys file into Chinese, then used VTMAGIC520 to generate config.exe and config.new files. I renamed the config.new file to config.sys and added it to the Maxdos file, and also copied config.exe together.
But after booting with this file, I found that the machine automatically restarted.
I used the pause key and saw that the reason for the restart was stack overflow. Modifying the stack was ineffective. Please help solve this! Thank you very much!!!
|
|
|
2008-1-16 10:02 |
|
|
flyhacker
新手上路
积分 10
发帖 4
注册 2007-11-9
状态 离线
|
|
|
2008-11-2 20:50 |
|
|
yjjia
中级用户
积分 300
发帖 107
注册 2007-9-15
状态 离线
|
|
|
2008-11-6 01:09 |
|
|
tzone
新手上路
积分 11
发帖 6
注册 2009-8-12
状态 离线
|
|
|
2009-8-20 07:03 |
|
|
wj5017
新手上路
积分 9
发帖 5
注册 2009-7-27
状态 离线
|
|
|
2010-3-9 11:45 |
|
