|
z640919a
初级用户
积分 157
发帖 72
注册 2006-10-22
状态 离线
|
『楼 主』:
DOS下上Internet
使用 LLM 解释/回答一下
几天了，DOS下上Internet不知怎样，能PING通，可浏览器不会用，内存也不够，最多只有486K。盼老大或高手能否用VM 或VPC做个教程，谢谢了。
Several days have passed, I don't know how to access the Internet under DOS. I can ping, but I don't know how to use the browser. The memory is also insufficient, with a maximum of only 486K. I hope the boss or expert can make a tutorial using VM or VPC. Thanks.
|
|
 2007-1-30 10:38 |
|
|
Michael
钻石会员
积分 10046
发帖 3039
注册 2002-11-11
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
用lynx，很简单，配置好wattcp.cfg就可以了，不要加载不必要的tsr程序，只加载一个packet driver就可以了。
Using Lynx is very simple. Just configure wattcp.cfg properly, don't load unnecessary TSR programs, and only load one packet driver.
|
简单就是美 |
|
|
2007-2-2 21:49 |
|
|
z640919a
初级用户
积分 157
发帖 72
注册 2006-10-22
状态 离线
|
『第 3 楼』:
使用 LLM 解释/回答一下
只有TCPTSR（76.78K）和NMTSR（6.16K），试一下用lynx，谢谢你的回答。在VM 或VPC里能否用NET或桥连上Internet。
Only TCPTSR (76.78K) and NMTSR (6.16K). Try using lynx. Thank you for your answer. Can you connect to the Internet using NET or bridge in VM or VPC?
|
|
|
2007-2-2 23:36 |
|
|
Michael
钻石会员
积分 10046
发帖 3039
注册 2002-11-11
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
当然，和真实机器一样。
Of course, same as the real machine.
|
简单就是美 |
|
|
2007-2-3 02:52 |
|
|
z640919a
初级用户
积分 157
发帖 72
注册 2006-10-22
状态 离线
|
『第 5 楼』:
使用 LLM 解释/回答一下
MS-DOS LAN Manager v2.1 Netbind
Performing Power-Up Autosense...
Switching between 10BaseT and 100BaseTx...
Selected media: 100BaseTx (TP 100) Autosense
Initializing TCP/IP via DHCP....
Microsoft DOS TCP/IP 1.0a
C:\>ping 192.168.0.1
Copyright (c) Microsoft Corporation, 1991-1993. All rights reserved.
Copyright (c) Hewlett-Packard Corporation, 1985-1993. All rights reserved.
Copyright (c) 3Com Corporation, 1985-1993. All rights reserved.
echo received from 192.168.0.1 with roundtrip < 50 msec
VPC5.2Z中用lynx出现 “NO PACKET DRIVER FOUND ”已在config.sys中加载dis_pkt.dos。NDIS2驱动程序怎样转成Packet 。看过 http://www.cn-dos.net/forum/viewthread.php?tid=15347，就是不能转成Packet。望能得到详细解答，谢谢了
MS-DOS LAN Manager v2.1 Netbind
Performing Power-Up Autosense...
Switching between 10BaseT and 100BaseTx...
Selected media: 100BaseTx (TP 100) Autosense
Initializing TCP/IP via DHCP....
Microsoft DOS TCP/IP 1.0a
C:\>ping 192.168.0.1
Copyright (c) Microsoft Corporation, 1991-1993. All rights reserved.
Copyright (c) Hewlett-Packard Corporation, 1985-1993. All rights reserved.
Copyright (c) 3Com Corporation, 1985-1993. All rights reserved.
echo received from 192.168.0.1 with roundtrip < 50 msec
There is "NO PACKET DRIVER FOUND" when using lynx in VPC5.2Z. dis_pkt.dos has been loaded in config.sys. How to convert NDIS2 driver to Packet. I have read http://www.cn-dos.net/forum/viewthread.php?tid=15347, but still can't convert to Packet. Hope to get a detailed answer, thanks.
|
|
|
2007-2-3 05:26 |
|
|
Michael
钻石会员
积分 10046
发帖 3039
注册 2002-11-11
状态 离线
|
『第 6 楼』:
使用 LLM 解释/回答一下
把你ms network client安装目录下的的system.ini和protocol.ini贴上来。
Please provide the system.ini and protocol.ini files from the installation directory of your MS Network Client.
|
简单就是美 |
|
|
2007-2-3 09:22 |
|
|
z640919a
初级用户
积分 157
发帖 72
注册 2006-10-22
状态 离线
|
『第 7 楼』:
使用 LLM 解释/回答一下
1.PROTOCOL.INI
[network.setup]
version=0x3110
netcard=DC21X4,1,DC21X4,1
transport=tcpip,TCPIP
lana0=DC21X4,1,tcpip
[TCPIP]
NBSessions=6
DefaultGateway1=
DefaultGateway0=
SubNetMask0=255 255 255 0
IPAddress0=
DisableDHCP=0
DriverName=TCPIP$
BINDINGS=DC21X4
LANABASE=0
[protman]
DriverName=PROTMAN$
PRIORITY=MS$NDISHLP
2.SYSTEM.INI
[network]
sizworkbuf=1498
filesharing=no
printsharing=no
autologon=yes
computername=HXPHH
lanroot=C:\NET
username=HXPHH
workgroup=WORKGROUP
reconnect=yes
dospophotkey=N
lmlogon=0
logondomain=WORKGROUP
preferredredir=basic
autostart=basic
maxconnections=8
[network drivers]
netcard=DC21X4.DOS
transport=tcpdrv.dos,nemm.dos
devdir=C:\NET
LoadRMDrivers=yes
[386enh]
TimerCriticalSection=5000
UniqueDosPSP=TRUE
PSPIncrement=2
[Password Lists]
*Shares=C:\NET\Share000.PWL
1.PROTOCOL.INI
version=0x3110
netcard=DC21X4,1,DC21X4,1
transport=tcpip,TCPIP
lana0=DC21X4,1,tcpip
NBSessions=6
DefaultGateway1=
DefaultGateway0=
SubNetMask0=255 255 255 0
IPAddress0=
DisableDHCP=0
DriverName=TCPIP$
BINDINGS=DC21X4
LANABASE=0
DriverName=PROTMAN$
PRIORITY=MS$NDISHLP
2.SYSTEM.INI
sizworkbuf=1498
filesharing=no
printsharing=no
autologon=yes
computername=HXPHH
lanroot=C:\NET
username=HXPHH
workgroup=WORKGROUP
reconnect=yes
dospophotkey=N
lmlogon=0
logondomain=WORKGROUP
preferredredir=basic
autostart=basic
maxconnections=8
netcard=DC21X4.DOS
transport=tcpdrv.dos,nemm.dos
devdir=C:\NET
LoadRMDrivers=yes
TimerCriticalSection=5000
UniqueDosPSP=TRUE
PSPIncrement=2
*Shares=C:\NET\Share000.PWL
|
|
|
2007-2-3 09:29 |
|
|
Michael
钻石会员
积分 10046
发帖 3039
注册 2002-11-11
状态 离线
|
『第 8 楼』:
使用 LLM 解释/回答一下
PROTOCOL.INI添加以下几行:
DriverName=PKTDRV$
BINDINGS=DC21X4
INTVEC=0X60
Add the following lines to PROTOCOL.INI:
DriverName=PKTDRV$
BINDINGS=DC21X4
INTVEC=0X60
|
简单就是美 |
|
|
2007-2-3 10:28 |
|
|
z640919a
初级用户
积分 157
发帖 72
注册 2006-10-22
状态 离线
|
『第 9 楼』:
使用 LLM 解释/回答一下
原来也加过，但还是不行呀，指定IP地址也不行，试过好多方法都不行，会有“NO PACKET DRIVER FOUND”。是不是已连上，还有什么方法来确认是不是已加载PACKET DRIVER。
I used to add it too, but it still doesn't work. Specifying the IP address doesn't work either. I've tried many methods and it still doesn't work. There will be "NO PACKET DRIVER FOUND". Is it already connected? What other methods are there to confirm whether the PACKET DRIVER has been loaded?
|
|
|
2007-2-3 23:48 |
|
|
Michael
钻石会员
积分 10046
发帖 3039
注册 2002-11-11
状态 离线
|
『第 10 楼』:
使用 LLM 解释/回答一下
从启动信息上看根本就没加载dis_pkt.dos啊。
把dis_pkt.dos行从config.sys里去掉，把dis_pkt.dos拷到net安装目录下，然后修改net目录下的system.ini
netcard=DC21X4.DOS
transport=tcpdrv.dos,nemm.dos,dis_pkt.dos
devdir=C:\NET
LoadRMDrivers=yes
From the boot information, it doesn't seem that dis_pkt.dos was loaded at all. Remove the line with dis_pkt.dos from config.sys, copy dis_pkt.dos to the net installation directory, and then modify system.ini in the net directory
netcard=DC21X4.DOS
transport=tcpdrv.dos,nemm.dos,dis_pkt.dos
devdir=C:\NET
LoadRMDrivers=yes
|
简单就是美 |
|
|
2007-2-4 06:57 |
|
|
z640919a
初级用户
积分 157
发帖 72
注册 2006-10-22
状态 离线
|
『第 11 楼』:
使用 LLM 解释/回答一下
config.sys加载内存也有dis_pkt.dos，现在应该上Internet了（已登录外网FTP服务器），太高兴了，谢谢你。用FTP下载时有“WATTCP” 插口错误，不知什么意思
wattcp.cfg
my_ip = 192.168.0.2
netmask = 255.255.255.0
gateway = 192.168.0.1
还有LYNX的wattcp.cfg也是这样配制的，出现错误。
config.sys also loads dis_pkt.dos into memory. Now it should be able to go online (already logged into an external FTP server). So happy, thank you. When downloading with FTP, there is a "WATTCP" socket error. I don't know what it means.
wattcp.cfg
my_ip = 192.168.0.2
netmask = 255.255.255.0
gateway = 192.168.0.1
The wattcp.cfg for LYNX is also configured this way, and an error occurs.
|
|
|
2007-2-4 08:31 |
|
|
z640919a
初级用户
积分 157
发帖 72
注册 2006-10-22
状态 离线
|
『第 12 楼』:
使用 LLM 解释/回答一下
TITLE: DosLynx Load Error
DOSLYNX LOAD ERROR
Return to Hotlist
DosLynx was unable to load the requested URL.
This could be due to an invalid URL
or due to the remote host being unaccessible.
If this error is the result of an attempt to read a USENET News group,
the group may not exist.
Check the Message Box for a specific error.
标题：DosLynx 加载错误
DOSLYNX 加载错误
返回热列表
DosLynx 无法加载请求的 URL。
这可能是由于无效的 URL
或者由于远程主机不可访问。
如果此错误是尝试读取 USENET 新闻组的结果，
该新闻组可能不存在。
检查消息框以获取特定错误。
|
|
|
2007-2-4 08:35 |
|
|
Michael
钻石会员
积分 10046
发帖 3039
注册 2002-11-11
状态 离线
|
『第 13 楼』:
使用 LLM 解释/回答一下
wattcp.cfg再配置上nameserver的ip地址
比如：
nameserver=192.168.0.1
Configure the nameserver IP address in wattcp.cfg. For example:
nameserver=192.168.0.1
|
简单就是美 |
|
|
2007-2-4 09:19 |
|
|
z640919a
初级用户
积分 157
发帖 72
注册 2006-10-22
状态 离线
|
『第 14 楼』:
使用 LLM 解释/回答一下
Microsoft DOS TCP/IP Protocol Driver 1.0a
Copyright (c) Microsoft Corporation, 1991. All rights reserved.
Copyright (c) Hewlett-Packard Corporation, 1985-1991. All rights reserved.
Copyright (c) 3Com Corporation, 1985-1991. All rights reserved.
Microsoft DOS TCP/IP NEMM Driver 1.0
MAC/DIS to Packet Driver converter loaded. Version 1.07
Copyright 1991 FTP Software, Inc. All rights reserved.
v1.07 by Joe R. Doupnik, jrd@cc.usu.edu, Utah State Univ, 18 May 1991
The command completed successfully.
Killer v1.0 Copyright 1995 Vincent Penquerc'h. All Rights Reserved.
Killer installed in memory.
DOSKEY installed.
DOSLFN 0.32o: high loaded consuming 11840 bytes.
CuteMouse v1.9.1
Installed at PS/2 port
Now you are in MS-DOS 7.10 prompt. Type 'HELP' for help.
MS-DOS LAN Manager v2.1 Netbind
Performing Power-Up Autosense...
Switching between 10BaseT and 100BaseTx...
Selected media: 100BaseTx (TP 100) Autosense
Microsoft DOS TCP/IP 1.0a
好的，wattcp.cfg配置上nameserver的ip地址，我用192.168.0.1和DNS 服务器地址试试，怎么FTP也启动了，是不是要用BYE才行。
Microsoft DOS TCP/IP Protocol Driver 1.0a
Copyright (c) Microsoft Corporation, 1991. All rights reserved.
Copyright (c) Hewlett-Packard Corporation, 1985-1991. All rights reserved.
Copyright (c) 3Com Corporation, 1985-1991. All rights reserved.
Microsoft DOS TCP/IP NEMM Driver 1.0
MAC/DIS to Packet Driver converter loaded. Version 1.07
Copyright 1991 FTP Software, Inc. All rights reserved.
v1.07 by Joe R. Doupnik, jrd@cc.usu.edu, Utah State Univ, 18 May 1991
The command completed successfully.
Killer v1.0 Copyright 1995 Vincent Penquerc'h. All Rights Reserved.
Killer installed in memory.
DOSKEY installed.
DOSLFN 0.32o: high loaded consuming 11840 bytes.
CuteMouse v1.9.1
Installed at PS/2 port
Now you are in MS-DOS 7.10 prompt. Type 'HELP' for help.
MS-DOS LAN Manager v2.1 Netbind
Performing Power-Up Autosense...
Switching between 10BaseT and 100BaseTx...
Selected media: 100BaseTx (TP 100) Autosense
Microsoft DOS TCP/IP 1.0a
Okay, I configured the nameserver's IP address in wattcp.cfg. I tried using 192.168.0.1 and the DNS server address. Why did FTP start up? Do I need to use BYE to exit?
|
|
|
2007-2-4 10:02 |
|
|
z640919a
初级用户
积分 157
发帖 72
注册 2006-10-22
状态 离线
|
『第 15 楼』:
使用 LLM 解释/回答一下
FTP> cd 22712261
250 Directory changed to /22712261
FTP> get key_1985.txt
200 PORT Command successful.
150 Opening ASCII mode data connection for key_1985.txt (47 Bytes).
WATTCP socket error: -1
425 Cannot open data connection.
Transfer of 0 Kbytes (0 bytes) in 26034.95 seconds ( 0.00 Kbytes/s ).
还是不行，是不是ASCII 方式问题
FTP> cd 22712261
250 Directory changed to /22712261
FTP> get key_1985.txt
200 PORT Command successful.
150 Opening ASCII mode data connection for key_1985.txt (47 Bytes).
WATTCP socket error: -1
425 Cannot open data connection.
Transfer of 0 Kbytes (0 bytes) in 26034.95 seconds ( 0.00 Kbytes/s ).
Still not working. Is it a problem with the ASCII mode?
|
|
|
2007-2-4 10:14 |
|
