|
小天使
初级用户
 
积分 189
发帖 16
注册 2004-7-30
状态 离线
|
『楼 主』:
[推荐]如何使用Ghost备份和恢复系统
使用 LLM 解释/回答一下
Windows98/me的稳定性大家都知道,系统崩溃随时的威胁着我们。而重新安装Windows尤其Windows2000那漫长的过程简直叫人无法忍受,再加上驱动程序、应用软件、如此漫长的过程实在令人痛不欲生。而Winme的系统还原实在是太浪费硬盘空间而且降低系统运行速度。因此,一套操作简单功能又强大系统备份软件实在必不可少,这里我向你推荐强力推荐Noton Ghost其现在的主要版本为5.0 6.0各地均有下载。他能快速的备份操作系统 并准确恢复操作系统,实为备份佳品。
这里先向你介绍一下Ghost的基本功能:(Ghost 不能在Windows me Windows 2000中运行.Windows me/2000的用户先做好启动盘附带DOS下的鼠标驱动程序,有软驱启动、运行鼠标驱动进入Ghost所在文件夹运行Ghost.exe 最好不要放在C盘下)
启动Ghost,立即进入DOS模式,首先是Ghost版本介绍,单击OK进入主界面可分为以下几项:
Local 本地硬盘间的备份
LPT 网络硬盘间的备份
Option 设置(一般不做调整,使用默认值)
Quit 退出
作为单机用户,我们只选择Loacl,其包括以下几选项:
Disk 硬盘操作选项
To Disk 硬盘对硬盘完全拷贝
To Image 硬盘内容备份成镜像文件
From Image 从镜像文件恢复到原来硬盘
Partition 硬盘分区操作选项
To Partition 分区对分区完全拷贝
To Image 分区内容备份成镜像文件
From Image 从镜像文件复原到分区
check 检查功能选项
操作步骤:
1.选择Loacl→Partition→To Image 将硬盘分区备份为一个后缀为".gho"的镜像文件。
2.选择要备份的分区所在的驱动器,单击ok
3.选择要备份的分区,就是System分区,单击ok
4.在Filename一栏键入镜像文件名称,如"Win98.gho"及存放位置(注:不能选正在备份的分区),然
后按"enter"键。
5.选择是否压缩,No 不压缩, Fast 低压缩, High 高压缩。 一般选High 高压缩,速度慢点,但可
以压缩50%
6.现在就看着进度条慢慢的走了。备份速度得快慢与内存又很大关系。我得内存64M时传输率为40M
每分钟。而升级128M后,每分钟为70M,节省了不少时间。
7.备份完毕以后,就可以退出Ghost
恢复镜像文件:(原硬盘分区大小一定不能更改)
1.选择Local→Partition→From Image,从镜像文件恢复系统。
2.选择镜像文件要恢复的源分区,单击ok
3.提示是否确定还原,当然YES
恢复完毕,提示你重新启动计算机,回车,和你备份前一摸一样。
用Ghost备份恢复系统,比重新安装95%的时间,而且,桌面、菜单等等个人设置也不用重新调整,是不是很方便。如果你再有Ghost Explorer(克隆幽灵管理)还可以用他打开GHO映像文件,就像使用winzip一样,单独提取,还原GHO映像中的某一文件.
The stability of Windows 98/me is well-known, and system crashes threaten us at any time. And the long process of reinstalling Windows, especially Windows 2000, is simply unbearable. Coupled with drivers and application software, such a long process is really miserable. And the system restore of Winme is too wasteful of hard disk space and reduces the system running speed. Therefore, a system backup software that is easy to operate and powerful is essential. Here I strongly recommend Noton Ghost. Its main current versions are 5.0 and 6.0, and downloads are available everywhere. It can quickly back up the operating system and accurately restore the operating system, which is really a good backup.
Here first introduce the basic functions of Ghost: (Ghost cannot run in Windows me and Windows 2000. Users of Windows me/2000 should first make a boot disk with the mouse driver under DOS. Boot with a floppy disk, run the mouse driver, enter the folder where Ghost is located, and run Ghost.exe. It is best not to place it on drive C)
Start Ghost, and immediately enter the DOS mode. First is the Ghost version introduction. Click OK to enter the main interface, which can be divided into the following items:
Local: Backup between local hard disks
LPT: Backup between network hard disks
Option: Settings (generally not adjusted, use default values)
Quit: Quit
As a single-user, we only choose Local, which includes the following options:
Disk: Hard disk operation options
To Disk: Complete copy from hard disk to hard disk
To Image: Backup hard disk content as an image file
From Image: Restore from image file to original hard disk
Partition: Hard disk partition operation options
To Partition: Complete copy from partition to partition
To Image: Backup partition content as an image file
From Image: Restore from image file to partition
check: Check function options
Operation steps:
1. Select Local→Partition→To Image to back up the hard disk partition as an image file with the suffix ".gho".
2. Select the drive where the partition to be backed up is located, and click OK.
3. Select the partition to be backed up, which is the System partition, and click OK.
4. Type the name of the image file in the Filename column, such as "Win98.gho" and the storage location (note: do not select the partition being backed up), then press the "enter" key.
5. Select whether to compress, No: no compression, Fast: low compression, High: high compression. Generally, select High: high compression. The speed is slower, but it can compress by 50%.
6. Now just watch the progress bar move slowly. The speed of backup is greatly related to memory. When my memory is 64M, the transfer rate is 40M per minute. And after upgrading to 128M, it is 70M per minute, saving a lot of time.
7. After the backup is complete, you can exit Ghost.
Restore image file: (The size of the original hard disk partition must not be changed)
1. Select Local→Partition→From Image to restore the system from the image file.
2. Select the source partition to which the image file is to be restored, and click OK.
3. Prompt whether to confirm the restoration, of course YES.
After the restoration is complete, it prompts you to restart the computer. Press Enter, and it is exactly the same as before the backup.
Using Ghost to back up and restore the system takes 95% less time than reinstalling, and personal settings such as the desktop and menu do not need to be readjusted. Isn't it very convenient? If you have Ghost Explorer (Clone Ghost Manager), you can also use it to open GHO image files, just like using winzip, to extract and restore a single file from the GHO image.
此帖被 +2 点积分 点击查看详情 评分人:【 dthao 】 | 分数: +2 | 时间:2007-9-27 21:46 |
|
|
|
2004-7-31 00:00 |
|
|
cn_archer
元老会员
         农民
积分 2903
发帖 991
注册 2003-7-23 来自 福建省
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
尽管这个是比较初级的资料,但楼主的热心还是值得赞扬,加精鼓励之。
Although this is relatively basic material, the building owner's enthusiasm is still worthy of praise, and it is encouraged to be highlighted.
|

艰难奋长戟,万古用一夫
中国DOS联盟 http://www.cn-dos.net 欢迎大家来共同学习
我的MSN&E-Mail cn_archer@hotmail.com QQ 56049418
|
|
2004-8-2 00:00 |
|
|
shijianxin
初级用户
 
积分 115
发帖 52
注册 2005-8-7
状态 离线
|
『第 3 楼』:
使用 LLM 解释/回答一下
学习了!支持一下!
Got it! I'll give it a thumbs up!
|

愿你们永远开心 |
|
2005-8-8 01:26 |
|
|
zcjzcj
新手上路

积分 5
发帖 3
注册 2005-10-9
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
easy 经常这样弄的
easy 经常这样弄的
(Since the original text is already in English, just return it as is)
|
|
2005-10-9 21:21 |
|
|
chujiafu
银牌会员
    
积分 1337
发帖 594
注册 2004-5-26 来自 安徽 宿州
状态 离线
|
|
2005-10-10 06:37 |
|
|
sun573
初级用户
 
积分 28
发帖 11
注册 2005-10-10 来自 浙江
状态 离线
|
『第 6 楼』:
使用 LLM 解释/回答一下
请问各位高手,如何用dos启动盘进入ghost,我的ghost是装在f 盘的,f:>\softwar\ghost>ghost/,可就是打不开,不知那一位高手能指教一下。谢谢了
Excuse me, all you experts, how to enter Ghost using a DOS boot disk? My Ghost is installed on drive F. F:>\softwar\ghost>ghost/, but it just can't be opened. I wonder if any expert can give me some advice. Thanks.
|
|
2005-10-11 20:53 |
|
|
不得不爱
超级版主
         我爱DOS
积分 5310
发帖 2044
注册 2005-9-26 来自 四川南充
状态 离线
|
|
2005-10-14 08:32 |
|
|
mist
新手上路

积分 5
发帖 5
注册 2005-10-15
状态 离线
|
『第 8 楼』:
使用 LLM 解释/回答一下
Ghost 从9.0开始摇身变为 Windows 环境运行。虽然具有对正在使用的操作系统所在分区进行备份,还原的强大功能,但这也有不少弊端。比如,万一系统严重破坏,无法进入 Windows,那么 Ghost 也就无用武之地了。并且,鉴于对软件激活的保护等方面的因素,Windows 下的 Ghost 热备份下来系统的可能不是一个 100% 的映像。所以,我还是比较喜欢使用 DOS 版的 Ghost。
Ghost has transformed to run in a Windows environment starting from version 9.0. Although it has powerful functions for backing up and restoring the partition where the operating system in use is located, there are also many drawbacks. For example, if the system is seriously damaged and cannot boot into Windows, then Ghost has no use. Moreover, considering factors such as protection for software activation, the system hot - backed up by Ghost under Windows may not be a 100% image. So, I still prefer to use the DOS version of Ghost.
|
|
2005-10-15 09:28 |
|
|
不得不爱
超级版主
         我爱DOS
积分 5310
发帖 2044
注册 2005-9-26 来自 四川南充
状态 离线
|
|
2005-10-15 20:56 |
|
|
lanyu008
新手上路

积分 13
发帖 7
注册 2005-12-12 来自 广西柳州
状态 离线
|
『第 10 楼』:
使用 LLM 解释/回答一下
我是新手,GHOST在哪启动啊?
I'm a newbie, where to boot GHOST?
|
|
2005-12-12 00:52 |
|
|
boblhh9999
中级用户
  
积分 316
发帖 74
注册 2004-3-4
状态 离线
|
『第 11 楼』:
使用 LLM 解释/回答一下
其实楼主已经说的很明白了,需要系统盘引导,然后进入ghost.exe 所在的文件夹里。
Actually, the original poster has already made it very clear. It is necessary to boot with the system disk and then enter the folder where ghost.exe is located.
|
|
2005-12-13 18:57 |
|
|
chenyy
初级用户
 
积分 143
发帖 49
注册 2005-11-28
状态 离线
|
|
2005-12-14 19:35 |
|
|
jieok3375
中级用户
  
积分 282
发帖 130
注册 2006-9-20 来自 广东
状态 离线
|
『第 13 楼』:
使用 LLM 解释/回答一下
要是把GHOST的命令参数全贴出来就更好了。
It would be even better if the full set of GHOST command parameters were posted.
|

~~~~好好学习
天天向上~~~~ |
|
2006-10-13 23:55 |
|
|
weilong888
银牌会员
    
积分 1270
发帖 548
注册 2004-5-31
状态 离线
|
『第 14 楼』:
使用 LLM 解释/回答一下
这命令参数,自己用帮助命令看一下就可以了。
You can just look at the help command for these command parameters.
|
|
2006-10-14 01:29 |
|
|
linyusen
新手上路

积分 12
发帖 6
注册 2006-10-19
状态 离线
|
『第 15 楼』:
使用 LLM 解释/回答一下
LZ说的很有道理的.特别是为那些学校里面的女生维修电脑的时候,这是一个很不错的选择哦
What LZ said makes a lot of sense. Especially when repairing computers for girls in school, this is a very good choice.
|
|
2006-10-19 07:50 |
|