|
2770215
新手上路
积分 14
发帖 3
注册 2006-3-8
状态 离线
|
『楼 主』:
关于启动盘上调用Ghost的相关配置疑问
使用 LLM 解释/回答一下
小弟刚学做启动盘没多久！对于一些DOS下的命令还不太熟悉！今天就参考别人的做法自己试做了一个启动Ghost的IMG，其中config.sys如下： [COMMON]
DOS=HIGH,UMB
DEVICEHIGH=HIMEM.SYS /TESTMEM:OFF
DEVICEHIGH=EMM386.EXE NOEMS
DEVICEHIGH=OAKCDROM.SYS /D:MSCD000
FILES=50
BUFFERS=40
SHELL=COMMAND.COM /E:512 /P
STACKS=9,256
LASTDRIVE=Z
autoexec.bat如下：@ECHO OFF
CLS
SET PROMPT=$P$G
SET TEMP=C:\
SET TMP=C:\
PATH=A:\;C:\;C:\WINDOWS;C:\WINDOWS\COMMAND
LH SMARTDRV.EXE 20480
LH MSCDEX.EXE /D:MSCD000
LH DOSKEY.COM
%CDROM%:
ghost
启动到最后出现Bad command or file name
但最终也能成功启动GHOST。我知道我这个批处理有很多错误的地方！但由于是初学，对很多的命令都不太了解。望大狭门能指点，或给个更好的方案！谢谢！
Little brother has just started making boot disks not long ago! He is not very familiar with some DOS commands! Today, he tried to make an IMG for booting Ghost by referring to others' practices. The config.sys is as follows:
DOS=HIGH,UMB
DEVICEHIGH=HIMEM.SYS /TESTMEM:OFF
DEVICEHIGH=EMM386.EXE NOEMS
DEVICEHIGH=OAKCDROM.SYS /D:MSCD000
FILES=50
BUFFERS=40
SHELL=COMMAND.COM /E:512 /P
STACKS=9,256
LASTDRIVE=Z
The autoexec.bat is as follows: @ECHO OFF
CLS
SET PROMPT=$P$G
SET TEMP=C:\
SET TMP=C:\
PATH=A:\;C:\;C:\WINDOWS;C:\WINDOWS\COMMAND
LH SMARTDRV.EXE 20480
LH MSCDEX.EXE /D:MSCD000
LH DOSKEY.COM
%CDROM%:
ghost
It appeared "Bad command or file name" at the end of booting but finally could successfully boot Ghost. He knows there are many wrong places in this batch processing! But since he is a beginner, he doesn't understand many commands. Hope the experts can give pointers or provide a better plan! Thanks!
|
|
 2006-3-9 15:17 |
|
|
不得不爱
超级版主
我爱DOS
积分 5310
发帖 2044
注册 2005-9-26
来自 四川南充
状态 离线
|
|
|
2006-3-9 20:01 |
|
|
bc12060101
银牌会员
积分 1455
发帖 712
注册 2006-1-20
状态 离线
|
『第 3 楼』:
不用这么麻烦的
使用 LLM 解释/回答一下
Autoexec.bat文件内容：
---------------------------------
@echo off
Mscdex.exe /D:mscd001 /L:z
z:
ghost -clone,mode=pload,src=z:\backup.gho:1,dst=1:1 -sure -rb
---------------------------------
Config.sys文件内容：
---------------------------------
device=OAKCDROM.SYS /D:mscd001
---------------------------------
以上批处理文件仅适用于ghost.exe及其镜像文件置于光盘根目录下的情况。若放置在其它位置，只需更改Autoexec.bat文件中最后两行内容即可。
例如：至于f盘根目录下
-----------------------------------------------------
f:
ghost -clone,mode=pload,src=f:\backup.gho:1,dst=1:1 -sure -rb
----------------------------------------------------
或干脆改为一行命令：
---------------------------------------------------
f:\ghost.exe -clone,mode=pload,src=f:\backup.gho:1,dst=1:1 -sure -rb
--------------------------------------------------
Content of Autoexec.bat file:
---------------------------------
@echo off
Mscdex.exe /D:mscd001 /L:z
z:
ghost -clone,mode=pload,src=z:\backup.gho:1,dst=1:1 -sure -rb
---------------------------------
Content of Config.sys file:
---------------------------------
device=OAKCDROM.SYS /D:mscd001
---------------------------------
The above batch file is only applicable when ghost.exe and its image file are placed in the root directory of the CD. If placed in another location, only the last two lines in the Autoexec.bat file need to be changed.
For example: Placed in the root directory of drive F
-----------------------------------------------------
f:
ghost -clone,mode=pload,src=f:\backup.gho:1,dst=1:1 -sure -rb
----------------------------------------------------
Or simply change to a single line command:
---------------------------------------------------
f:\ghost.exe -clone,mode=pload,src=f:\backup.gho:1,dst=1:1 -sure -rb
--------------------------------------------------
|
|
|
2006-3-10 20:00 |
|
|
cc321mn
初级用户
积分 40
发帖 17
注册 2006-10-31
来自 江西
状态 离线
|
|
|
2006-10-31 03:54 |
|
|
cmyhome
初级用户
积分 74
发帖 30
注册 2006-6-1
状态 离线
|
『第 5 楼』:
使用 LLM 解释/回答一下
CONFIG.SYS没什么，一般有HIMEM.SYS,加了光驱驱动就行了，我给个AUTOEXEC.BAT吧，我自己编，中文菜单：
********************************************************
@ECHO OFF
TH 《天汇汉字，可改用其它的》
ECHO 操作系统一键恢复
ECHO 请用数字键选择菜单
ECHO.
ECHO 1. 自 动 备 份C: 盘
ECHO 2. 自 动 恢 复C: 盘
ECHO 3. 启动到命令提示符
ECHO 4. 重 启 系 统
ECHO.
ECHO 注意：恢复系统前请备份C:盘重要数据
CHOICE /c:1234
IF ERRORLEVEL 4 GOTO RESET
IF ERRORLEVEL 3 GOTO GHO
IF ERRORLEVEL 2 GOTO BAK
IF ERRORLEVEL 1 GOTO DOS
:BAK
TH/Q
CLS
GHOST -CLONE,MODE=PDUMP,SRC=1:1,DST=H:\SYS\SYSTEM.GHO -SURE -Z9 -RB
GOTO END
:GHO
TH/Q
CLS
GHOST -CLONE,MODE=PLOAD,SRC=H:\SYS\SYSTEM.GHO:1,DST=1:1 -SURE -RB
GOTO END
:DOS
TH/Q
CLS
LH MSCDEX.EXE /D:MSCD001
GOTO END
:RESET
TH/Q
CLS
RESET.COM 《重启命令，自己上网下个就行了》
:END
CONFIG.SYS is nothing special, generally there is HIMEM.SYS, just add the CD-ROM driver. I'll give an AUTOEXEC.BAT, which I made myself, with a Chinese menu:
********************************************************
@ECHO OFF
TH 《Tianhui Chinese characters, can be replaced with others》
ECHO One-key system recovery
ECHO Please use the number key to select the menu
ECHO.
ECHO 1. Automatically backup C: drive
ECHO 2. Automatically restore C: drive
ECHO 3. Boot to command prompt
ECHO 4. Restart the system
ECHO.
ECHO Note: Please back up important data on C: drive before restoring the system
CHOICE /c:1234
IF ERRORLEVEL 4 GOTO RESET
IF ERRORLEVEL 3 GOTO GHO
IF ERRORLEVEL 2 GOTO BAK
IF ERRORLEVEL 1 GOTO DOS
:BAK
TH/Q
CLS
GHOST -CLONE,MODE=PDUMP,SRC=1:1,DST=H:\SYS\SYSTEM.GHO -SURE -Z9 -RB
GOTO END
:GHO
TH/Q
CLS
GHOST -CLONE,MODE=PLOAD,SRC=H:\SYS\SYSTEM.GHO:1,DST=1:1 -SURE -RB
GOTO END
:DOS
TH/Q
CLS
LH MSCDEX.EXE /D:MSCD001
GOTO END
:RESET
TH/Q
CLS
RESET.COM 《Restart command, you can download it from the Internet yourself》
:END
|
|
|
2006-10-31 04:16 |
|
|
amao
中级用户
积分 316
发帖 152
注册 2006-6-18
状态 离线
|
『第 6 楼』:
使用 LLM 解释/回答一下
LH SMARTDRV.EXE 20480
LH MSCDEX.EXE /D:MSCD000
虽然这个不是这里的本质问题，但这两句顺序反了。
LH SMARTDRV.EXE 20480
LH MSCDEX.EXE /D:MSCD000
Although this is not the essential problem here, the order of these two sentences is reversed.
|
|
|
2006-10-31 13:46 |
|
|
fastslz
铂金会员
DOS一根葱
积分 5493
发帖 2315
注册 2006-5-1
来自 上海
状态 离线
|
『第 7 楼』:
使用 LLM 解释/回答一下
LH SMARTDRV.EXE 20480缓存数20480高了一点，低配置电脑会死机的
LH SMARTDRV.EXE with a cache size of 20480 is a bit high; low - configuration computers may crash.
|
第一高手 第二高手
我的小站
 |
|
|
2006-10-31 20:59 |
|
|
不得不爱
超级版主
我爱DOS
积分 5310
发帖 2044
注册 2005-9-26
来自 四川南充
状态 离线
|
|
|
2006-11-1 01:53 |
|
|
terse
银牌会员
积分 2404
发帖 946
注册 2005-9-8
状态 离线
|
『第 9 楼』:
使用 LLM 解释/回答一下
Originally posted by cmyhome at 2006-10-31 04:16:
CONFIG.SYS没什么，一般有HIMEM.SYS,加了光驱驱动就行了，我给个AUTOEXEC.BAT吧，我自己编，中文菜单：
********************************************************
@ECHO ...
文字和背景的颜色在那里设置？
我现在用的是'本是'的VTMagic.com将config中文字体换掉的，
另我是U盘启动是不是可以不要config中：
DEVICEHIGH=OAKCDROM.SYS /D:MSCD000这句？
Last edited by terse on 2006-11-13 at 01:59 PM ]
Originally posted by cmyhome at 2006-10-31 04:16:
There's nothing special about CONFIG.SYS. Generally, there are HIMEM.SYS and the CD-ROM driver added. Here's an AUTOEXEC.BAT I made, with a Chinese menu:
********************************************************
@ECHO ...
Where are the text and background colors set?
I'm currently using 'Ben Shi's' VTMagic.com to change the font in CONFIG,
Also, if I'm using a USB flash drive to boot, do I not need the line DEVICEHIGH=OAKCDROM.SYS /D:MSCD000 in CONFIG?
Last edited by terse on 2006-11-13 at 01:59 PM ]
|
|
|
2006-11-13 13:58 |
|
