编译模式问题 - 中国DOS联盟论坛 - 中国DOS联盟之联合DOS论坛

我使用的是wattcp开发包，请问在将源代码生成为库模块的时候，采用的是哪种编译方式？

TRACE - turn on tracing/debugging code
SKIPINI - bootp/dhcp only, no WATTCP.CFG (size critical apps)
ETH_MSS - you might set =576 for serial use (EPPPD), mostly
useful if lacking CFG file (SKIPINI, etc)
TW_TO - set between 30 and 240 for an RFC-compliant
TIME_WAIT period (defaults to 2, higher can delay
sock_wait_closed() much longer)
#CFLAGS= $(DEBUGS) -DMSDOS -IC:\borlandc\include -I..\include
#CFLAGS= $(DEBUGS) -DMSDOS -IC:\bc4\include -I..\include
#CFLAGS= $(DEBUGS) -DMSDOS -DSKIPINI -DETH_MSS=576 -IC:\borlandc\include -I..\include
CFLAGS= $(DEBUGS) -DMSDOS -DETH_MSS=576 -IC:\borlandc\include -I..\include

我配置了wattcp.cfg文件，但是我不知道采用一种编译方式才和我的配置文件是配合使用的？

第1楼　hustlemon	发表于 2003-07-25 00:00
初级用户　发帖 3　积分 112
编译模式问题我使用的是wattcp开发包，请问在将源代码生成为库模块的时候，采用的是哪种编译方式？ TRACE - turn on tracing/debugging code SKIPINI - bootp/dhcp only, no WATTCP.CFG (size critical apps) ETH_MSS - you might set =576 for serial use (EPPPD), mostly useful if lacking CFG file (SKIPINI, etc) TW_TO - set between 30 and 240 for an RFC-compliant TIME_WAIT period (defaults to 2, higher can delay sock_wait_closed() much longer) #CFLAGS= $(DEBUGS) -DMSDOS -IC:\borlandc\include -I..\include #CFLAGS= $(DEBUGS) -DMSDOS -IC:\bc4\include -I..\include #CFLAGS= $(DEBUGS) -DMSDOS -DSKIPINI -DETH_MSS=576 -IC:\borlandc\include -I..\include CFLAGS= $(DEBUGS) -DMSDOS -DETH_MSS=576 -IC:\borlandc\include -I..\include 我配置了wattcp.cfg文件，但是我不知道采用一种编译方式才和我的配置文件是配合使用的？