求助 DOS 下分配磁盘分区并复制文件到指定分区 - DOS启动盘 & LOGO技术（启动盘室） - 中国DOS联盟论坛

我用U盘量产了我把一个GHOSTXP.GHO 放到了 U盘的 CD-ROM 分区里面

我想用U盘启动后将这个GHO 文件复制到硬盘分区里面然后运行 GHOST 恢复到磁盘第1 分区

但是我不知道怎么在DOS 下面分配磁盘的分区盘符, 最好是也支持NTFS 分区.

比如 U 盘量产后有两个分区一个是 CD-ROM 分区一个是FAT 分区

GHO文件和GHSOT.EXE 在 CD-ROM 根目录

硬盘两个分区两种情况第一分区是FAT32 分区或者第一分区是NTFS 分区

现在我想用U盘启动后
为 CD-ROM , USB 的FAT 分区 , 硬盘两个分区都分配好盘符
C: D: E: F:

然后将CD-ROM 根目录的 GHO 文件复制到 F: 盘然后启动 CD-ROM 的 GHOST.exe 将 F: 盘的 GHO 文件恢复到 E: 盘

请问有朋友能帮忙写个批处理吗? 谢谢了

I used the USB flash drive to mass-produce. I put a GHOSTXP.GHO into the CD-ROM partition of the USB flash drive.

I want to use the USB flash drive to boot and then copy this GHO file to the hard disk partition and run GHOST to restore it to the first partition of the disk. But I don't know how to assign drive letters to the disk partitions under DOS, and it's best to support NTFS partitions.

For example, after mass-producing the USB flash drive, there are two partitions, one is the CD-ROM partition and the other is the FAT partition.

The GHO file and GHSOT.EXE are in the root directory of the CD-ROM.

There are two situations for the hard disk partitions: the first partition is a FAT32 partition or the first partition is an NTFS partition.

Now I want to use the USB flash drive to boot and assign drive letters to the CD-ROM, the USB FAT partition, and the two hard disk partitions as C: D: E: F: respectively.

Then copy the GHO file in the root directory of the CD-ROM to the F: drive, and then start the CD-ROM's GHOST.exe to restore the GHO file in the F: drive to the E: drive.

Is there a friend who can help write a batch script? Thank you.