虚拟机VMware网络配置 - 中国DOS联盟论坛 - 中国DOS联盟之联合DOS论坛

谢谢，源地址下不了，后来在那个帖子里找到了，还有个问题问一下你，ftp运行后提示no packet driver found应该是网卡的驱动没找到，我使用vmware装的dos，装了MSClient，装的是VMware的pcntnd.dos网卡，于是我按照wattcp里的说明文件试了试，可是又出现了很多问题，不知道怎么解决，试了很多种配置方式就是出不来，下面是我自己的配置文件，希望能帮忙看看，到底哪里出了问题，谢谢！
config.sys配置：
DEVICE=C:\DOS71\ECHO.SYS W/e/l/c/o/m/e /t/o MS-DOS 7.10...
DEVICE=C:\DOS71\ECHO.SYS C/o/p/y/r/i/g/h/t M/i/c/r/o/s/o/f/t C/o/r/p. A/l/l /r/i/g/h/t/s /r/e/s/e/r/v/e/d.
DEVICE=C:\DOS71\HIMEM.SYS/testmem:off
DEVICE=C:\DOS71\EMM386.EXE noems novcpi
DEVICEHIGH=C:\DOS71\SETVER.EXE
REM DEVICEHIGH=C:\DOS71\POWER.EXE
DEVICEHIGH=C:\DOS71\VIDE-CDD.SYS /D:IDE-CD
REM DEVICEHIGH=C:\DOS71\DISPLAY.SYS CON=(,,1)
COUNTRY=001,437,C:\DOS71\COUNTRY.SYS
SHELL=COMMAND.COM /P /E:640
DOS=HIGH,UMB,AUTO
FCBS=4,0
FILES=30
BUFFERS=15,0
LASTDRIVE=J
STACKS=9,256
SET PATH=C:\DOS71;..;C:\MASM5.0;.\net
device=C:\NET\ifshlp.sys
devicehigh=c:\net\protman.dos /i:c:\net
devicehigh=c:\net\dis_pkt.dos
devicehigh=c:\net\pcntnd.dos
devicehigh=c:\net\nemm.dos

autoexec.bat配置：
C:\NET\net initialize
@ECHO OFF
PROMPT $P$G
SET DIRCMD=/4
MODE CON RATE=32 DELAY=1
REM MODE CON CP PREPARE=((437)EGA.CPI)
REM MODE CON CP SELECT=437
REM KEYB US,,KEYBOARD.SYS
LH KILLER
LH DOSKEY
LH DOSLFN /Z:C:\DOS71\CP437UNI.TBL
REM LH MSCDEX /D:IDE-CD
LH SHARE /L:30
REM LH NLSFUNC
LH SMARTDRV
REM LH CTMOUSE
REM For compatiblity purpose:
LH CTMOUSE > NUL
ECHO.
REM For locking volumes to enable "direct disk access":
CALL LOCKDRV.BAT
BREAK ON
LFNFOR ON
ECHO Now you are in MS-DOS 7.10 prompt. Type 'HELP' for help.
ECHO.
SET CTSYN=C:\SOUND
SET MIDI=SYNTH:1 MAP:E MODE:0
SET BLASTER=A220 I5 D1 H5 P330 E620 T6
PATH=C:\NET;C:\DOS71;..;;C:\DOS71\norton
C:\NET\netbind.com
C:\NET\umb.com
C:\NET\tcptsr.exe
C:\NET\tinyrfc.exe
C:\NET\nmtsr.exe
C:\NET\emsbfr.exe
C:\NET\net start

protocol.ini配置：

version=0x3110
netcard=amd$pcntnd,1,AMD$PCNTND,1
transport=ms$ndishlp,MS$NDISHLP
transport=ms$netbeui,MS$NETBEUI
transport=tcpip,TCPIP
lana0=amd$pcntnd,1,ms$netbeui
lana1=amd$pcntnd,1,ms$ndishlp
lana2=amd$pcntnd,1,tcpip

DefaultGateway0=192 168 171 2
NBSessions=6
SubNetMask0=255 255 255 0
IPAddress0=192 168 1 2
DisableDHCP=1
DriverName=TCPIP$
BINDINGS=AMD$PCNTND
LANABASE=1

DriverName=PROTMAN$
PRIORITY=MS$NDISHLP

drivername=pktdrv$
bindings=amd$pcntnd
intvec=0x60
chainvec=0x66

DriverName=PCNTND$
maxmulticasts=10
txbuffers=4
rxbuffers=4
;medium=_100full

DriverName=ndishlp$
BINDINGS=AMD$PCNTND

DriverName=netbeui$
SESSIONS=10
NCBS=12
BINDINGS=AMD$PCNTND
LANABASE=0

system.ini配置：

sizworkbuf=1498
filesharing=no
printsharing=no
autologon=yes
computername=DOS USER C
lanroot=C:\NET
username=DOS USER
workgroup=MSHOME
reconnect=yes
dospophotkey=N
lmlogon=0
logondomain=WORKGROUP
preferredredir=full
autostart=full
maxconnections=8

netcard=pcntnd.dos
transport=*netbeui,tcpdrv.dos,nemm.dos,ndishlp.sys
devdir=C:\NET
LoadRMDrivers=yes

TimerCriticalSection=5000
UniqueDosPSP=TRUE
PSPIncrement=2

*Shares=C:\NET\Shares.PWL

不知道为什么，总是提示tcp is not loaded，还有to load netbeui,the ndishlp.sys driver must be listed in thesection of the system.ini file也不知道哪里有问题，帮忙分析一下，谢谢

第1楼　connerxxx	发表于 2010-04-27 00:49
初级用户　发帖 31　积分 73
虚拟机VMware网络配置我的DOS已经安装了Microsoft Network Client，怎么FTP命令无法启用，MNC目录下也没找到FTP命令，是不是有什么别的程序没安装啊，希望能帮忙解决下！ [ Last edited by connerxxx on 2010-4-29 at 00:51 ]

第2楼　goeasy2005	发表于 2010-04-28 15:48
中级用户　发帖 155　积分 325
http://www.cn-dos.net/forum/viewthread.php?tid=3538&fpage=2 [ Last edited by goeasy2005 on 2010-4-28 at 15:53 ]

第3楼　connerxxx	发表于 2010-04-29 00:46
初级用户　发帖 31　积分 73
谢谢，源地址下不了，后来在那个帖子里找到了，还有个问题问一下你，ftp运行后提示no packet driver found应该是网卡的驱动没找到，我使用vmware装的dos，装了MSClient，装的是VMware的pcntnd.dos网卡，于是我按照wattcp里的说明文件试了试，可是又出现了很多问题，不知道怎么解决，试了很多种配置方式就是出不来，下面是我自己的配置文件，希望能帮忙看看，到底哪里出了问题，谢谢！ config.sys配置： DEVICE=C:\DOS71\ECHO.SYS W/e/l/c/o/m/e /t/o MS-DOS 7.10... DEVICE=C:\DOS71\ECHO.SYS C/o/p/y/r/i/g/h/t M/i/c/r/o/s/o/f/t C/o/r/p. A/l/l /r/i/g/h/t/s /r/e/s/e/r/v/e/d. DEVICE=C:\DOS71\HIMEM.SYS/testmem:off DEVICE=C:\DOS71\EMM386.EXE noems novcpi DEVICEHIGH=C:\DOS71\SETVER.EXE REM DEVICEHIGH=C:\DOS71\POWER.EXE DEVICEHIGH=C:\DOS71\VIDE-CDD.SYS /D:IDE-CD REM DEVICEHIGH=C:\DOS71\DISPLAY.SYS CON=(,,1) COUNTRY=001,437,C:\DOS71\COUNTRY.SYS SHELL=COMMAND.COM /P /E:640 DOS=HIGH,UMB,AUTO FCBS=4,0 FILES=30 BUFFERS=15,0 LASTDRIVE=J STACKS=9,256 SET PATH=C:\DOS71;..;C:\MASM5.0;.\net device=C:\NET\ifshlp.sys devicehigh=c:\net\protman.dos /i:c:\net devicehigh=c:\net\dis_pkt.dos devicehigh=c:\net\pcntnd.dos devicehigh=c:\net\nemm.dos autoexec.bat配置： C:\NET\net initialize @ECHO OFF PROMPT $P$G SET DIRCMD=/4 MODE CON RATE=32 DELAY=1 REM MODE CON CP PREPARE=((437)EGA.CPI) REM MODE CON CP SELECT=437 REM KEYB US,,KEYBOARD.SYS LH KILLER LH DOSKEY LH DOSLFN /Z:C:\DOS71\CP437UNI.TBL REM LH MSCDEX /D:IDE-CD LH SHARE /L:30 REM LH NLSFUNC LH SMARTDRV REM LH CTMOUSE REM For compatiblity purpose: LH CTMOUSE > NUL ECHO. REM For locking volumes to enable "direct disk access": CALL LOCKDRV.BAT BREAK ON LFNFOR ON ECHO Now you are in MS-DOS 7.10 prompt. Type 'HELP' for help. ECHO. SET CTSYN=C:\SOUND SET MIDI=SYNTH:1 MAP:E MODE:0 SET BLASTER=A220 I5 D1 H5 P330 E620 T6 PATH=C:\NET;C:\DOS71;..;;C:\DOS71\norton C:\NET\netbind.com C:\NET\umb.com C:\NET\tcptsr.exe C:\NET\tinyrfc.exe C:\NET\nmtsr.exe C:\NET\emsbfr.exe C:\NET\net start protocol.ini配置： version=0x3110 netcard=amd$pcntnd,1,AMD$PCNTND,1 transport=ms$ndishlp,MS$NDISHLP transport=ms$netbeui,MS$NETBEUI transport=tcpip,TCPIP lana0=amd$pcntnd,1,ms$netbeui lana1=amd$pcntnd,1,ms$ndishlp lana2=amd$pcntnd,1,tcpip DefaultGateway0=192 168 171 2 NBSessions=6 SubNetMask0=255 255 255 0 IPAddress0=192 168 1 2 DisableDHCP=1 DriverName=TCPIP$ BINDINGS=AMD$PCNTND LANABASE=1 DriverName=PROTMAN$ PRIORITY=MS$NDISHLP drivername=pktdrv$ bindings=amd$pcntnd intvec=0x60 chainvec=0x66 DriverName=PCNTND$ maxmulticasts=10 txbuffers=4 rxbuffers=4 ;medium=_100full DriverName=ndishlp$ BINDINGS=AMD$PCNTND DriverName=netbeui$ SESSIONS=10 NCBS=12 BINDINGS=AMD$PCNTND LANABASE=0 system.ini配置： sizworkbuf=1498 filesharing=no printsharing=no autologon=yes computername=DOS USER C lanroot=C:\NET username=DOS USER workgroup=MSHOME reconnect=yes dospophotkey=N lmlogon=0 logondomain=WORKGROUP preferredredir=full autostart=full maxconnections=8 netcard=pcntnd.dos transport=netbeui,tcpdrv.dos,nemm.dos,ndishlp.sys devdir=C:\NET LoadRMDrivers=yes TimerCriticalSection=5000 UniqueDosPSP=TRUE PSPIncrement=2 Shares=C:\NET\Shares.PWL 不知道为什么，总是提示tcp is not loaded，还有to load netbeui,the ndishlp.sys driver must be listed in thesection of the system.ini file也不知道哪里有问题，帮忙分析一下，谢谢