怎样得到文件里每行的某个字段？ - 中国DOS联盟论坛

写DOS批处理，遇到一个问题，自己解决不了，要请教大家了：

现有一个文档，格式是这样的（注意有红字的地方）：
set iaAHCI_ESB2 = "Intel(R) ESB2 SATA AHCI Controller"
set iaAHCI_7RDH = "Intel(R) ICH7R/DH SATA AHCI Controller"
set iaAHCI_7MMDH = "Intel(R) ICH7M/MDH SATA AHCI Controller"
set iaAHCI_8RDHDO = "Intel(R) ICH8R/DH/DO SATA AHCI Controller"
set iaAHCI_8MEM = "Intel(R) ICH8M-E/M SATA AHCI Controller"
set iaAHCI_9RDODH = "Intel(R) ICH9R/DO/DH SATA AHCI Controller"
set iaAHCI_9MEM = "Intel(R) ICH9M-E/M SATA AHCI Controller"
set iaAHCI_10DDO = "Intel(R) ICH10D/DO SATA AHCI Controller"
set iaAHCI_10R = "Intel(R) ICH10R SATA AHCI Controller"
set iaAHCI_PCHM = "Intel(R) PCHM SATA AHCI Controller 4 Port"
set iaAHCI_PCHM_1 = "Intel(R) PCHM SATA AHCI Controller 6 Port"
set iaAHCI_PCH = "Intel(R) PCH SATA AHCI Controller"
set iaStor_ESB2 = "Intel(R) ESB2 SATA RAID Controller"
set iaStor_7RDH = "Intel(R) ICH7R/DH SATA RAID Controller"
set iaStor_7MDH = "Intel(R) ICH7MDH SATA RAID Controller"
set iaStor_8R9R10RDOPCH = "Intel(R) ICH8R/ICH9R/ICH10R/DO/PCH SATA RAID Controller"
set iaStor_8ME9MEPCHM = "Intel(R) ICH8M-E/ICH9M-E/PCHM SATA RAID Controller"

set VCOMBORAID_I386_NT5="VIA V-RAID Controller Series(Windows XP/SRV2003)"
set VCOMBORAID_x64_NT5="VIA V-RAID Controller Series(Windows XP/SRV2003-x64)"
set VCOMBORAID_I386_WIN2K="VIA V-RAID Controller Series(Windows 2K)"
set VCOMBORAID_I386_NT4="VIA V-RAID Controller Series(Windows NT4)"

set BROADCOM_SATA_XXXX = "Broadcom RAIDCore(tm) Controller 64 Bit", bcraid
set BROADCOM_SATA_XXXX = "Broadcom RAIDCore(tm) Controller W2K", bcraid

怎么样把上面一段文字的输出到另一个新文件，格式如下：

iaAHCI_ESB2
Intel(R) ESB2 SATA AHCI Controller
iaAHCI_7RDH
Intel(R) ICH7R/DH SATA AHCI Controller
iaAHCI_7MMDH
Intel(R) ICH7M/MDH SATA AHCI Controller
iaAHCI_8RDHDO
Intel(R) ICH8R/DH/DO SATA AHCI Controller
iaAHCI_8MEM
Intel(R) ICH8M-E/M SATA AHCI Controller
iaAHCI_9RDODH
Intel(R) ICH9R/DO/DH SATA AHCI Controller
iaAHCI_9MEM
Intel(R) ICH9M-E/M SATA AHCI Controller
iaAHCI_10DDO
Intel(R) ICH10D/DO SATA AHCI Controller
iaAHCI_10R
Intel(R) ICH10R SATA AHCI Controller
iaAHCI_PCHM
Intel(R) PCHM SATA AHCI Controller 4 Port
iaAHCI_PCHM_1
Intel(R) PCHM SATA AHCI Controller 6 Port
iaAHCI_PCH
Intel(R) PCH SATA AHCI Controller
iaStor_ESB2
Intel(R) ESB2 SATA RAID Controller
iaStor_7RDH
Intel(R) ICH7R/DH SATA RAID Controller
iaStor_7MDH
Intel(R) ICH7MDH SATA RAID Controller
iaStor_8R9R10RDOPCH
Intel(R) ICH8R/ICH9R/ICH10R/DO/PCH SATA RAID Controller
iaStor_8ME9MEPCHM
Intel(R) ICH8M-E/ICH9M-E/PCHM SATA RAID Controller

VCOMBORAID_I386_NT5
VIA V-RAID Controller Series(Windows XP/SRV2003)
VCOMBORAID_x64_NT5
VIA V-RAID Controller Series(Windows XP/SRV2003-x64)
VCOMBORAID_I386_WIN2K
VIA V-RAID Controller Series(Windows 2K)
VCOMBORAID_I386_NT4
VIA V-RAID Controller Series(Windows NT4)

BROADCOM_SATA_XXXX
Broadcom RAIDCore(tm) Controller 64 Bit
BROADCOM_SATA_XXXX
Broadcom RAIDCore(tm) Controller W2K

注意上面那段有红字的地方，有“,”。输出后把“,”去掉

哪位兄弟能帮忙解决下，十分感谢！

[ Last edited by jmwjy on 2010-1-24 at 19:15 ]

第1楼　jmwjy	发表于 2010-01-24 16:20
新手上路　发帖 5　积分 11
怎样得到文件里每行的某个字段？写DOS批处理，遇到一个问题，自己解决不了，要请教大家了：现有一个文档，格式是这样的（注意有红字的地方）： set iaAHCI_ESB2 = "Intel(R) ESB2 SATA AHCI Controller" set iaAHCI_7RDH = "Intel(R) ICH7R/DH SATA AHCI Controller" set iaAHCI_7MMDH = "Intel(R) ICH7M/MDH SATA AHCI Controller" set iaAHCI_8RDHDO = "Intel(R) ICH8R/DH/DO SATA AHCI Controller" set iaAHCI_8MEM = "Intel(R) ICH8M-E/M SATA AHCI Controller" set iaAHCI_9RDODH = "Intel(R) ICH9R/DO/DH SATA AHCI Controller" set iaAHCI_9MEM = "Intel(R) ICH9M-E/M SATA AHCI Controller" set iaAHCI_10DDO = "Intel(R) ICH10D/DO SATA AHCI Controller" set iaAHCI_10R = "Intel(R) ICH10R SATA AHCI Controller" set iaAHCI_PCHM = "Intel(R) PCHM SATA AHCI Controller 4 Port" set iaAHCI_PCHM_1 = "Intel(R) PCHM SATA AHCI Controller 6 Port" set iaAHCI_PCH = "Intel(R) PCH SATA AHCI Controller" set iaStor_ESB2 = "Intel(R) ESB2 SATA RAID Controller" set iaStor_7RDH = "Intel(R) ICH7R/DH SATA RAID Controller" set iaStor_7MDH = "Intel(R) ICH7MDH SATA RAID Controller" set iaStor_8R9R10RDOPCH = "Intel(R) ICH8R/ICH9R/ICH10R/DO/PCH SATA RAID Controller" set iaStor_8ME9MEPCHM = "Intel(R) ICH8M-E/ICH9M-E/PCHM SATA RAID Controller" set VCOMBORAID_I386_NT5="VIA V-RAID Controller Series(Windows XP/SRV2003)" set VCOMBORAID_x64_NT5="VIA V-RAID Controller Series(Windows XP/SRV2003-x64)" set VCOMBORAID_I386_WIN2K="VIA V-RAID Controller Series(Windows 2K)" set VCOMBORAID_I386_NT4="VIA V-RAID Controller Series(Windows NT4)" set BROADCOM_SATA_XXXX = "Broadcom RAIDCore(tm) Controller 64 Bit", bcraid set BROADCOM_SATA_XXXX = "Broadcom RAIDCore(tm) Controller W2K", bcraid 怎么样把上面一段文字的输出到另一个新文件，格式如下： iaAHCI_ESB2 Intel(R) ESB2 SATA AHCI Controller iaAHCI_7RDH Intel(R) ICH7R/DH SATA AHCI Controller iaAHCI_7MMDH Intel(R) ICH7M/MDH SATA AHCI Controller iaAHCI_8RDHDO Intel(R) ICH8R/DH/DO SATA AHCI Controller iaAHCI_8MEM Intel(R) ICH8M-E/M SATA AHCI Controller iaAHCI_9RDODH Intel(R) ICH9R/DO/DH SATA AHCI Controller iaAHCI_9MEM Intel(R) ICH9M-E/M SATA AHCI Controller iaAHCI_10DDO Intel(R) ICH10D/DO SATA AHCI Controller iaAHCI_10R Intel(R) ICH10R SATA AHCI Controller iaAHCI_PCHM Intel(R) PCHM SATA AHCI Controller 4 Port iaAHCI_PCHM_1 Intel(R) PCHM SATA AHCI Controller 6 Port iaAHCI_PCH Intel(R) PCH SATA AHCI Controller iaStor_ESB2 Intel(R) ESB2 SATA RAID Controller iaStor_7RDH Intel(R) ICH7R/DH SATA RAID Controller iaStor_7MDH Intel(R) ICH7MDH SATA RAID Controller iaStor_8R9R10RDOPCH Intel(R) ICH8R/ICH9R/ICH10R/DO/PCH SATA RAID Controller iaStor_8ME9MEPCHM Intel(R) ICH8M-E/ICH9M-E/PCHM SATA RAID Controller VCOMBORAID_I386_NT5 VIA V-RAID Controller Series(Windows XP/SRV2003) VCOMBORAID_x64_NT5 VIA V-RAID Controller Series(Windows XP/SRV2003-x64) VCOMBORAID_I386_WIN2K VIA V-RAID Controller Series(Windows 2K) VCOMBORAID_I386_NT4 VIA V-RAID Controller Series(Windows NT4) BROADCOM_SATA_XXXX Broadcom RAIDCore(tm) Controller 64 Bit BROADCOM_SATA_XXXX Broadcom RAIDCore(tm) Controller W2K 注意上面那段有红字的地方，有“,”。输出后把“,”去掉哪位兄弟能帮忙解决下，十分感谢！ [ Last edited by jmwjy on 2010-1-24 at 19:15 ]

第2楼　HAT	发表于 2010-01-24 18:50
版主　发帖 5,017　积分 9,023
很好奇，楼主为何觉得这是一个“很低级的问题”？

第3楼　jmwjy	发表于 2010-01-24 19:14
新手上路　发帖 5　积分 11
Originally posted by HAT at 2010-1-24 06:50 PM: 很好奇，楼主为何觉得这是一个“很低级的问题”？版主大人，帮帮我吧因为我觉得这里的老大们都很厉害，这种问题一定很低级的。那我说错话了…… 我改

第4楼　asnahu	发表于 2010-01-25 08:58
初级用户　发帖 53　积分 99
sed "s/set //; s/=\s/\n/g; s/\x22//g; s/,.//g" 1.txt sed为第三方工具。请在论坛搜索下载地址。

第5楼　jmwjy	发表于 2010-01-26 00:51
新手上路　发帖 5　积分 11
sed为第三方工具。请在论坛搜索下载地址。嗯,谢谢了! 又长见识了,还真不知道有这么强大的工具, google了一下,SED几乎都是32位的,16位纯DOS下的还没找到下载地址再找找……

第6楼　HAT	发表于 2010-01-26 06:37
版主　发帖 5,017　积分 9,023
Re 5楼试试这里： http://sed.sourceforge.net/#download

第7楼　jmwjy	发表于 2010-01-27 01:18
新手上路　发帖 5　积分 11
Originally posted by HAT at 2010-1-26 06:37 AM: 试试这里： http://sed.sourceforge.net/#download 谢谢版主大人，这个地址找过了，应该对应下这个吧： HHsed v1.5 for MS-DOS by Howard Helman 下不了…… 不过通过键接的文件名，最终通过GOOGLE找到了^_^，高兴…… sed "s/set //; s/=\s/\n/g; s/\x22//g; s/,.//g" 1.txt asnahu，你真是神一样的人啊！！！