如何接受用户输入更改文本内容 - 中国DOS联盟论坛

rev.ini文本如下：

# Game Config dods.cn


# CachePath - set to the folder where your GCF files are located
#
CacheEnabled=False
CachePath=d:\Steam\SteamApps

# Language - rev emu will automagically load the correct language files. 
# This can be English, French, Italian, German, Spanish, sChinese, 
# Korean, Koreana, tChinese, Japanese, Russian, Thai, or Portugeuse
#
Language=sChinese

# Change Logging to True to enable/disable log file output for steam.dll
#
Logging=False

# Change SteamDll to point to your official Steam client DLL.
# This setting is required for Steam UserID Validation functions
# to support legit Steam IDs. Otherwise, all clients would get
# IDs generated from their IP addresses. 
# Also make sure you uncomment the line below (remove "#") 
# if you want to use this setting!
#
SteamDll=bin\steam_old.dll

# Change SteamClient to True if you want to use steamclient emulator
#
SteamClient=True

# 如果要使用steam上的用户名，请修改SteamUser后面的内容
# Defaults to revCrew if not specified
SteamUser=revCrew



# If Logging is set to True, choose which functions would you like to log.
#
FileSystem=False
Account=False
UserID=False



################################### NOTE ####################################
# These settings may apply even if you don't choose to use steamclient.dll! #
#############################################################################
#
# 玩家名称在下面修改，将DODS.CN修改为你的名字 (仅用于起源2007引擎的游戏)
#
PlayerName="test"

# Change the setting below to enable/disable log file output for steamclient.dll
#
Logging=False

# Change the setting below to enable a different master server for the server 
# browser
#MasterServer=213.239.209.221

上面的rev.ini配置文件中红色字体如何用批处理接受用户输入做出相应更改

[ Last edited by HAT on 2008-12-26 at 23:19 ]

@echo off
set /p input=请输入 PlayerName: 
set file=d:\test\rev.ini
for /f "delims=" %%a in ('findstr /n .* "%file%"') do (
  set "str=%%a"
  if not defined Overwrite (
    >"%file%" call echo.%%str:~2%%
    set Overwrite=.
  ) else (
    setlocal enabledelayedexpansion
    set str=!str:*:=!
    if /i "!str:~,10!"=="PlayerName" (
      >>"%file%" echo PlayerName="%input%"
    ) else (>>"%file%" echo.!str!)
    endlocal
  )
)

[ Last edited by tireless on 2008-12-25 at 16:55 ]

@echo off
set /p input=请输入 PlayerName: 
set "file=d:\test\rev.ini"
more +15 %0>"%file%"
>>"%file%" echo PlayerName="%input%"
>>"%file%" echo.
>>"%file%" echo # Change the setting below to enable/disable log file output for steamclient.dll
>>"%file%" echo #
>>"%file%" echo Logging=False
>>"%file%" echo.
>>"%file%" echo # Change the setting below to enable a different master server for the server 
>>"%file%" echo # browser
>>"%file%" echo #MasterServer=213.239.209.221
exit /b

# Game Config dods.cn


# CachePath - set to the folder where your GCF files are located
#
CacheEnabled=False
CachePath=d:\Steam\SteamApps

# Language - rev emu will automagically load the correct language files. 
# This can be English, French, Italian, German, Spanish, sChinese, 
# Korean, Koreana, tChinese, Japanese, Russian, Thai, or Portugeuse
#
Language=sChinese

# Change Logging to True to enable/disable log file output for steam.dll
#
Logging=False

# Change SteamDll to point to your official Steam client DLL.
# This setting is required for Steam UserID Validation functions
# to support legit Steam IDs. Otherwise, all clients would get
# IDs generated from their IP addresses. 
# Also make sure you uncomment the line below (remove "#") 
# if you want to use this setting!
#
SteamDll=bin\steam_old.dll

# Change SteamClient to True if you want to use steamclient emulator
#
SteamClient=True

# 如果要使用steam上的用户名，请修改SteamUser后面的内容
# Defaults to revCrew if not specified
SteamUser=revCrew



# If Logging is set to True, choose which functions would you like to log.
#
FileSystem=False
Account=False
UserID=False



################################### NOTE ####################################
# These settings may apply even if you don't choose to use steamclient.dll! #
#############################################################################
#
# 玩家名称在下面修改，将DODS.CN修改为你的名字 (仅用于起源2007引擎的游戏)
#

PlayerName="test"下面的几行直接more一下原始ini文件更简介些吧^_^

#开头的注释内容全不要了吧
然后按配置文件的格式ECHO 生成一个配置文件。这样或许更好写

[ Last edited by yishanju on 2008-12-25 at 16:20 ]

去年注释后的配置文件就像被拔光毛的狮子。

CacheEnabled=False
CachePath=d:\Steam\SteamApps

Language=sChinese

Logging=False

SteamDll=bin\steam_old.dll

SteamClient=True

SteamUser=revCrew

FileSystem=False
Account=False
UserID=False

PlayerName="test"

Logging=False

[ Last edited by yishanju on 2008-12-25 at 16:21 ]

Originally posted by HAT at 2008-12-25 04:11 PM:
PlayerName="test"下面的几行直接more一下原始ini文件更简介些吧^_^

我刚想说是，发现这样不对，因为我前面已经把原文件覆盖了...而且不可以 more 到同一个文件，如 more 1.txt>1.txt

[ Last edited by tireless on 2008-12-25 at 16:46 ]

是的，如果要采用4楼的方法，就要使用临时文件了。

谢谢各位热心的大大

来学习了。。看到那么多代码头有点大

第1楼　beyoungse	发表于 2008-12-25 01:19
中级用户　发帖 112　积分 253
[已结]如何接受用户输入更改文本内容 rev.ini文本如下： # Game Config dods.cn # CachePath - set to the folder where your GCF files are located # CacheEnabled=False CachePath=d:\Steam\SteamApps # Language - rev emu will automagically load the correct language files. # This can be English, French, Italian, German, Spanish, sChinese, # Korean, Koreana, tChinese, Japanese, Russian, Thai, or Portugeuse # Language=sChinese # Change Logging to True to enable/disable log file output for steam.dll # Logging=False # Change SteamDll to point to your official Steam client DLL. # This setting is required for Steam UserID Validation functions # to support legit Steam IDs. Otherwise, all clients would get # IDs generated from their IP addresses. # Also make sure you uncomment the line below (remove "#") # if you want to use this setting! # SteamDll=bin\steam_old.dll # Change SteamClient to True if you want to use steamclient emulator # SteamClient=True # 如果要使用steam上的用户名，请修改SteamUser后面的内容 # Defaults to revCrew if not specified SteamUser=revCrew # If Logging is set to True, choose which functions would you like to log. # FileSystem=False Account=False UserID=False ################################### NOTE #################################### # These settings may apply even if you don't choose to use steamclient.dll! # ############################################################################# # # 玩家名称在下面修改，将DODS.CN修改为你的名字 (仅用于起源2007引擎的游戏) # PlayerName="test" # Change the setting below to enable/disable log file output for steamclient.dll # Logging=False # Change the setting below to enable a different master server for the server # browser #MasterServer=213.239.209.221 上面的rev.ini配置文件中红色字体如何用批处理接受用户输入做出相应更改 [ Last edited by HAT on 2008-12-26 at 23:19 ]

第2楼　tireless	发表于 2008-12-25 15:27
银牌会员　发帖 1,122　积分 2,025
这样： @echo off set /p input=请输入 PlayerName: set file=d:\test\rev.ini for /f "delims=" %%a in ('findstr /n .* "%file%"') do ( set "str=%%a" if not defined Overwrite ( >"%file%" call echo.%%str:~2%% set Overwrite=. ) else ( setlocal enabledelayedexpansion set str=!str::=! if /i "!str:~,10!"=="PlayerName" ( >>"%file%" echo PlayerName="%input%" ) else (>>"%file%" echo.!str!) endlocal ) ) [ Last edited by tireless on 2008-12-25 at 16:55* ]

第3楼　tireless	发表于 2008-12-25 15:28
银牌会员　发帖 1,122　积分 2,025
或者这样： @echo off set /p input=请输入 PlayerName: set "file=d:\test\rev.ini" more +15 %0>"%file%" >>"%file%" echo PlayerName="%input%" >>"%file%" echo. >>"%file%" echo # Change the setting below to enable/disable log file output for steamclient.dll >>"%file%" echo # >>"%file%" echo Logging=False >>"%file%" echo. >>"%file%" echo # Change the setting below to enable a different master server for the server >>"%file%" echo # browser >>"%file%" echo #MasterServer=213.239.209.221 exit /b # Game Config dods.cn # CachePath - set to the folder where your GCF files are located # CacheEnabled=False CachePath=d:\Steam\SteamApps # Language - rev emu will automagically load the correct language files. # This can be English, French, Italian, German, Spanish, sChinese, # Korean, Koreana, tChinese, Japanese, Russian, Thai, or Portugeuse # Language=sChinese # Change Logging to True to enable/disable log file output for steam.dll # Logging=False # Change SteamDll to point to your official Steam client DLL. # This setting is required for Steam UserID Validation functions # to support legit Steam IDs. Otherwise, all clients would get # IDs generated from their IP addresses. # Also make sure you uncomment the line below (remove "#") # if you want to use this setting! # SteamDll=bin\steam_old.dll # Change SteamClient to True if you want to use steamclient emulator # SteamClient=True # 如果要使用steam上的用户名，请修改SteamUser后面的内容 # Defaults to revCrew if not specified SteamUser=revCrew # If Logging is set to True, choose which functions would you like to log. # FileSystem=False Account=False UserID=False ################################### NOTE #################################### # These settings may apply even if you don't choose to use steamclient.dll! # ############################################################################# # # 玩家名称在下面修改，将DODS.CN修改为你的名字 (仅用于起源2007引擎的游戏) #

第4楼　HAT	发表于 2008-12-25 16:11
版主　发帖 5,017　积分 9,023
Re 3楼 PlayerName="test"下面的几行直接more一下原始ini文件更简介些吧^_^

第5楼　yishanju	发表于 2008-12-25 16:15
银牌会员　发帖 1,357　积分 1,488
#开头的注释内容全不要了吧然后按配置文件的格式ECHO 生成一个配置文件。这样或许更好写 [ Last edited by yishanju on 2008-12-25 at 16:20 ]

第6楼　yishanju	发表于 2008-12-25 16:16
银牌会员　发帖 1,357　积分 1,488
去年注释后的配置文件就像被拔光毛的狮子。 CacheEnabled=False CachePath=d:\Steam\SteamApps Language=sChinese Logging=False SteamDll=bin\steam_old.dll SteamClient=True SteamUser=revCrew FileSystem=False Account=False UserID=False PlayerName="test" Logging=False [ Last edited by yishanju on 2008-12-25 at 16:21 ]

第7楼　tireless	发表于 2008-12-25 16:42
银牌会员　发帖 1,122　积分 2,025
Originally posted by HAT at 2008-12-25 04:11 PM: PlayerName="test"下面的几行直接more一下原始ini文件更简介些吧^_^ 我刚想说是，发现这样不对，因为我前面已经把原文件覆盖了...而且不可以 more 到同一个文件，如 more 1.txt>1.txt [ Last edited by tireless on 2008-12-25 at 16:46 ]

第8楼　HAT	发表于 2008-12-25 16:46
版主　发帖 5,017　积分 9,023
Re 7楼是的，如果要采用4楼的方法，就要使用临时文件了。

第9楼　beyoungse	发表于 2008-12-26 14:33
中级用户　发帖 112　积分 253
谢谢各位热心的大大

第10楼　kurt101	发表于 2008-12-26 19:28
初级用户　发帖 17　积分 23
来学习了。。看到那么多代码头有点大