怎样用批处理检测计算机的显卡、声卡、网卡、cpu信息 - 中国DOS联盟论坛

这是我收藏的一个批处理代码

@echo off
color 0a
title    硬件检测      
mode con cols=90
sc config  winmgmt start= auto >nul 2<&1
net start winmgmt 2>nul
setlocal  ENABLEDELAYEDEXPANSION
echo 主版:
for /f "tokens=1,* delims==" %%a in ('wmic BASEBOARD get 
Manufacturer^,Product^,Version^,SerialNumber /value') do (
    set /a tee+=1
    if "!tee!" == "3" echo      制造商  = %%b
    if "!tee!" == "4" echo      型  号  = %%b
    if "!tee!" == "5" echo      序列号  = %%b
    if "!tee!" == "6" echo      版  本  = %%b
)
set tee=0
echo      BIOS:
for /f "tokens=1,* delims==" %%a in ('wmic bios  get
CurrentLanguage^,Manufacturer^,SMBIOSBIOSVersion^,SMBIOSMajorVersion^,SMBIOSMinorVersion^,ReleaseDate /value') do (
    set /a tee+=1
    if "!tee!" == "3" echo      当前语言 = %%b
    if "!tee!" == "4" echo      制造商  = %%b
    if "!tee!" == "5" echo      发行日期 = %%b
    if "!tee!" == "6" echo      版  本  = %%b
    if "!tee!" == "7" echo      SMBIOSMajorVersion = %%b
    if "!tee!" == "8" echo      SMBIOSMinorVersion = %%b
)
set tee=0
echo.
echo CPU:
for /f "tokens=1,* delims==" %%a in ('wmic cpu get name^,ExtClock^,CpuStatus^,Description /value') do (
    set /a tee+=1
    if "!tee!" == "3" echo      CPU个数  = %%b
    if "!tee!" == "4" echo      处理器版本  = %%b
    if "!tee!" == "5" echo      外  频  = %%b
    if "!tee!" == "6" echo      名称及主频率  = %%b
)
set tee=0
echo.
echo 显示器:
for /f "tokens=1,* delims==" %%a in ('wmic DESKTOPMONITOR  get name^,ScreenWidth^,ScreenHeight^,PNPDeviceID /value') do (
    set /a tee+=1
    if "!tee!" == "3" echo      类    型  = %%b
    if "!tee!" == "4" echo      其他信息  = %%b
    if "!tee!" == "5" echo      屏幕高    = %%b
    if "!tee!" == "6" echo      屏幕宽    = %%b
)
set tee=0
echo.
echo 硬  盘:
for /f "tokens=1,* delims==" %%a in ('wmic DISKDRIVE get model^,interfacetype^,size^,totalsectors^,partitions /value') do (
    set /a tee+=1
    if "!tee!" == "3" echo      接口类型  = %%b
    if "!tee!" == "4" echo      硬盘型号  = %%b
    if "!tee!" == "5" echo      分区数    = %%b
    if "!tee!" == "6" echo      容    量  = %%b
    if "!tee!" == "7" echo      总扇区    = %%b
)
echo 分区信息:
wmic LOGICALDISK  where mediatype='12' get description,deviceid,filesystem,size,freespace
set tee=0
echo.
echo 网  卡:
for /f "tokens=1,* delims==" %%a in ('wmic NICCONFIG where "index='1'" get ipaddress^,macaddress^,description /value') do (
    set /a tee+=1
    if "!tee!" == "3" echo      网卡类型  = %%b
    if "!tee!" == "4" echo      网卡IP    = %%b
    if "!tee!" == "5" echo      网卡MAC  = %%b
)
set tee=0
echo.
echo 打印机:
for /f "tokens=1,* delims==" %%a in ('wmic PRINTER get caption /value') do (
    set /a tee+=1
    if "!tee!" == "3" echo      打印机名字  = %%b
)
set tee=0
echo.
echo 声  卡:
for /f "tokens=1,* delims==" %%a in ('wmic SOUNDDEV get name^,deviceid /value') do (
    set /a tee+=1
    if "!tee!" == "3" echo      其他信息  = %%b
    if "!tee!" == "4" echo      型    号  = %%b
)
set tee=0
echo.
echo 内    存:
for /f "tokens=1,* delims==" %%a in ('systeminfo^|find "内存"') do (
    echo        %%a 4534 %%b
)
echo.
echo 显    卡:
del /f "%TEMP%\temp.txt" 2>nul
dxdiag /t %TEMP%\temp.txt
rem 这里需要30秒左右!
for /f "tokens=1,2,* delims=:" %%a in ('findstr /c:" Card name:" /c:"Display Memory:" /c:"Current Mode:" "%TEMP%\temp.txt"') do (
        set /a tee+=1
        if !tee! == 1 echo    显卡型号: %%b
        if !tee! == 2 echo    显存大小: %%b
        if !tee! == 3 echo    当前设置: %%b
)
set /p var=需要额外信息吗(y/n):
if /i %var% == y notepad "%TEMP%\temp.txt"
del /f "%TEMP%\temp.txt" 2>nul
pause

[ Last edited by moniuming on 2008-10-16 at 10:01 ]

第1楼　516526966	发表于 2008-10-16 01:39
初级用户　发帖 37　积分 63
怎样用批处理检测计算机的显卡、声卡、网卡、cpu信息如何用批处理检测计算机的显卡、声卡、网卡、cpu信息。我知道有一个systeminfo的命令，但是截取不到显显卡、声卡、网卡、cpu确切信息。请高手帮忙。。。

第2楼　moniuming	发表于 2008-10-16 10:00
银牌会员　发帖 574　积分 1,335　来自广西
这是我收藏的一个批处理代码 @echo off color 0a title 硬件检测 mode con cols=90 sc config winmgmt start= auto >nul 2<&1 net start winmgmt 2>nul setlocal ENABLEDELAYEDEXPANSION echo 主版: for /f "tokens=1,* delims==" %%a in ('wmic BASEBOARD get Manufacturer^,Product^,Version^,SerialNumber /value') do ( set /a tee+=1 if "!tee!" == "3" echo 制造商 = %%b if "!tee!" == "4" echo 型号 = %%b if "!tee!" == "5" echo 序列号 = %%b if "!tee!" == "6" echo 版本 = %%b ) set tee=0 echo BIOS: for /f "tokens=1,* delims==" %%a in ('wmic bios get CurrentLanguage^,Manufacturer^,SMBIOSBIOSVersion^,SMBIOSMajorVersion^,SMBIOSMinorVersion^,ReleaseDate /value') do ( set /a tee+=1 if "!tee!" == "3" echo 当前语言 = %%b if "!tee!" == "4" echo 制造商 = %%b if "!tee!" == "5" echo 发行日期 = %%b if "!tee!" == "6" echo 版本 = %%b if "!tee!" == "7" echo SMBIOSMajorVersion = %%b if "!tee!" == "8" echo SMBIOSMinorVersion = %%b ) set tee=0 echo. echo CPU: for /f "tokens=1,* delims==" %%a in ('wmic cpu get name^,ExtClock^,CpuStatus^,Description /value') do ( set /a tee+=1 if "!tee!" == "3" echo CPU个数 = %%b if "!tee!" == "4" echo 处理器版本 = %%b if "!tee!" == "5" echo 外频 = %%b if "!tee!" == "6" echo 名称及主频率 = %%b ) set tee=0 echo. echo 显示器: for /f "tokens=1,* delims==" %%a in ('wmic DESKTOPMONITOR get name^,ScreenWidth^,ScreenHeight^,PNPDeviceID /value') do ( set /a tee+=1 if "!tee!" == "3" echo 类型 = %%b if "!tee!" == "4" echo 其他信息 = %%b if "!tee!" == "5" echo 屏幕高 = %%b if "!tee!" == "6" echo 屏幕宽 = %%b ) set tee=0 echo. echo 硬盘: for /f "tokens=1,* delims==" %%a in ('wmic DISKDRIVE get model^,interfacetype^,size^,totalsectors^,partitions /value') do ( set /a tee+=1 if "!tee!" == "3" echo 接口类型 = %%b if "!tee!" == "4" echo 硬盘型号 = %%b if "!tee!" == "5" echo 分区数 = %%b if "!tee!" == "6" echo 容量 = %%b if "!tee!" == "7" echo 总扇区 = %%b ) echo 分区信息: wmic LOGICALDISK where mediatype='12' get description,deviceid,filesystem,size,freespace set tee=0 echo. echo 网卡: for /f "tokens=1,* delims==" %%a in ('wmic NICCONFIG where "index='1'" get ipaddress^,macaddress^,description /value') do ( set /a tee+=1 if "!tee!" == "3" echo 网卡类型 = %%b if "!tee!" == "4" echo 网卡IP = %%b if "!tee!" == "5" echo 网卡MAC = %%b ) set tee=0 echo. echo 打印机: for /f "tokens=1,* delims==" %%a in ('wmic PRINTER get caption /value') do ( set /a tee+=1 if "!tee!" == "3" echo 打印机名字 = %%b ) set tee=0 echo. echo 声卡: for /f "tokens=1,* delims==" %%a in ('wmic SOUNDDEV get name^,deviceid /value') do ( set /a tee+=1 if "!tee!" == "3" echo 其他信息 = %%b if "!tee!" == "4" echo 型号 = %%b ) set tee=0 echo. echo 内存: for /f "tokens=1,* delims==" %%a in ('systeminfo^\|find "内存"') do ( echo %%a 4534 %%b ) echo. echo 显卡: del /f "%TEMP%\temp.txt" 2>nul dxdiag /t %TEMP%\temp.txt rem 这里需要30秒左右! for /f "tokens=1,2,* delims=:" %%a in ('findstr /c:" Card name:" /c:"Display Memory:" /c:"Current Mode:" "%TEMP%\temp.txt"') do ( set /a tee+=1 if !tee! == 1 echo 显卡型号: %%b if !tee! == 2 echo 显存大小: %%b if !tee! == 3 echo 当前设置: %%b ) set /p var=需要额外信息吗(y/n): if /i %var% == y notepad "%TEMP%\temp.txt" del /f "%TEMP%\temp.txt" 2>nul pause [ Last edited by moniuming on 2008-10-16 at 10:01 ]

第3楼　HAT	发表于 2008-10-16 10:10
版主　发帖 5,017　积分 9,023
参考这个帖子： http://www.cn-dos.net/forum/viewthread.php?tid=35662 该帖暂时锁定，若仍有疑问，请联系我。 by HAT @ 2008-10-16