Findstr的问题 - 中国DOS联盟论坛 - 中国DOS联盟之联合DOS论坛

这里写了一个用Findstr搭配dir来找在从当月开始算起往前三个月之内，在一些固定资料夹中将exe com档案列出并显示修改日期以及档案大小

但到最后的Findstr 要找exe com的时候最后就没有列出任何东西
不知道最后面的Findstr能不能这样用？

代码如下:


@if not defined debug @echo off
@prompt $
set system=%systemroot%\system32

if exist C_File.dat del C_File.dat /Q
if not exist Time_B.reg regedit /e /a "Time_B.reg" "HKEY_CURRENT_USER\Control Panel\International"

@(
echo REGEDIT4
echo 
echo "iDate"="2"
echo "iMeasure"="0"
echo "iTime"="1"
echo "iTLZero"="1"
echo "sDate"="-"
echo "sLongDate"="yyyy-MM-dd"
echo "sShortDate"="yyyy-MM-dd"
echo "sTimeFormat"="HH:mm"
echo "iCountry"="1"
echo "iDigits"="2"
echo "iLZero"="1"
echo "sDecimal"="."
echo "sThousand"=","
echo "sTime"=":"
)> Time_A.reg

regedit /s "Time_A.reg"
del Time_A.reg /Q

set "year_t=%date:~0,4%"
set "month_t=%date:~5,2%"
echo %month_t% | Findstr "0." >nul && set month_t=%month_t:~1,1%

:: 1 month
set /a month_1=%month_t%-1
set /a year_1=%year_t%
if %month_1% EQU 0 (
	set /a year_1=%year_1%-1
	set /a month_1=12
	)

:: 2 month
set /a month_2=%month_1%-1
set /a year_2=%year_1%
if %month_2% EQU 0 (
	set /a year_2=%year_2%-1
	set /a month_2=12
	)

:: 3 month
set /a month_3=%month_2%-1
set /a year_3=%year_2%
if %month_3% EQU 0 (
	set /a year_3=%year_3%-1
	set /a month_3=12
	)

if %month_1% LSS 10 set month_1=0%month_1%
if %month_2% LSS 10 set month_2=0%month_2%
if %month_3% LSS 10 set month_3=0%month_3%

set "Today=^%year_t%-%month_t%"
set "1month=^%year_1%-%month_1%"
set "2month=^%year_2%-%month_2%"
set "3month=^%year_3%-%month_3%"

call :C_File %systemroot%
call :C_File %system%
if defined Temp call :C_File %temp%
goto end

:C_File
for /f "tokens=1,3,*" %%a in (
	'dir /tc /a-d "%~1\*" ^| Findstr "%today% %1month% %2month% %3month%"'
		) do for /f "tokens=*" %%g in ('echo %~1\%%c') do echo %%a . %%~tg %%~zg %%~g >> C_File.dat
goto:eof

:end
Findstr -i "\.exe$ \.com$" C_File.dat

del C_File.dat /Q
regedit /s "Time_B.reg"
@prompt $P$G

最后面的Findstr如果改成
Findstr -i "\.exe \.com" C_File.dat 就可以正常显示
但这样只要中间字符有.exe和.com的也一样会显示出来

请问有没有什么方式可以修正的？

[ Last edited by sylovanas on 2008-9-4 at 06:01 PM ]

第1楼　sylovanas	发表于 2008-09-04 16:34
初级用户　发帖 42　积分 107
Findstr的问题这里写了一个用Findstr搭配dir来找在从当月开始算起往前三个月之内，在一些固定资料夹中将exe com档案列出并显示修改日期以及档案大小但到最后的Findstr 要找exe com的时候最后就没有列出任何东西不知道最后面的Findstr能不能这样用？代码如下: @if not defined debug @echo off @prompt $ set system=%systemroot%\system32 if exist C_File.dat del C_File.dat /Q if not exist Time_B.reg regedit /e /a "Time_B.reg" "HKEY_CURRENT_USER\Control Panel\International" @( echo REGEDIT4 echo echo "iDate"="2" echo "iMeasure"="0" echo "iTime"="1" echo "iTLZero"="1" echo "sDate"="-" echo "sLongDate"="yyyy-MM-dd" echo "sShortDate"="yyyy-MM-dd" echo "sTimeFormat"="HH:mm" echo "iCountry"="1" echo "iDigits"="2" echo "iLZero"="1" echo "sDecimal"="." echo "sThousand"="," echo "sTime"=":" )> Time_A.reg regedit /s "Time_A.reg" del Time_A.reg /Q set "year_t=%date:~0,4%" set "month_t=%date:~5,2%" echo %month_t% \| Findstr "0." >nul && set month_t=%month_t:~1,1% :: 1 month set /a month_1=%month_t%-1 set /a year_1=%year_t% if %month_1% EQU 0 ( set /a year_1=%year_1%-1 set /a month_1=12 ) :: 2 month set /a month_2=%month_1%-1 set /a year_2=%year_1% if %month_2% EQU 0 ( set /a year_2=%year_2%-1 set /a month_2=12 ) :: 3 month set /a month_3=%month_2%-1 set /a year_3=%year_2% if %month_3% EQU 0 ( set /a year_3=%year_3%-1 set /a month_3=12 ) if %month_1% LSS 10 set month_1=0%month_1% if %month_2% LSS 10 set month_2=0%month_2% if %month_3% LSS 10 set month_3=0%month_3% set "Today=^%year_t%-%month_t%" set "1month=^%year_1%-%month_1%" set "2month=^%year_2%-%month_2%" set "3month=^%year_3%-%month_3%" call :C_File %systemroot% call :C_File %system% if defined Temp call :C_File %temp% goto end :C_File for /f "tokens=1,3," %%a in ( 'dir /tc /a-d "%~1\" ^\| Findstr "%today% %1month% %2month% %3month%"' ) do for /f "tokens=" %%g in ('echo %~1\%%c') do echo %%a . %%~tg %%~zg %%~g >> C_File.dat goto:eof :end Findstr -i "\.exe$ \.com$" C_File.dat del C_File.dat /Q regedit /s "Time_B.reg" @prompt $P$G 最后面的Findstr如果改成 Findstr -i "\.exe \.com" C_File.dat 就可以正常显示但这样只要中间字符有.exe和.com的也一样会显示出来请问有没有什么方式可以修正的？ [ Last edited by sylovanas on 2008-9-4 at 06:01 PM* ]

第2楼　huahua0919	发表于 2008-09-04 18:35
银牌会员　发帖 780　积分 1,608
findstr/ic:""