梦幻中文WIN98启动盘第二版 简单说明
原来的中文WIN98启动盘是我两年前做出来的，从现在情况来看，已经有些不合时宜了，所以拿来再修改一下，考虑到实用性，仍然使用原来的天汇汉字系统。虽然如是大师在论坛上传的TW系统更小些，但其中文输入法不能输入词组，感觉太别扭了（^_^）。
盘上软件尽量使用汉化的软件，这个中文WIN98系统盘可以供学习DOS的磁盘和文件操作入门，以及内存管理等，并可在WIN系统崩溃时使用USB硬盘和U盘等备份硬盘上的数据。
用法。用它启动计算机，就会自动进入中文状态，因为压缩包比较大，因此速度会比WIN98本身的启动盘慢点，但压缩包作了优化，相对上一版速度会有所提高。
这张启动盘在WIN98SE的启动盘基础上制作，保留原有全部功能，保留SCANDISK、EDIT、ATTRIB等工具，支持大部分IDE光驱，部分USB硬盘、光驱和USB电子盘（U盘）以及SCSI光驱，并加上下列新的特性：
1、用汉化的WIN98 FDISK代替了原FDISK，你可以在自己熟悉的母语中进行分区操作了。WIN98的FDISK在大于64G的硬盘上使用会引起错误，这点要注意。
2、从FREEDOS中补充XCOPY， DELTREE两个常用的外部命令
3、增加鼠标驱动程序CTMOUSE，可驱动COM和PS2口听鼠标，只占3K内存
4、换用DOSLFN长文件名驱动，当它驻留内存时支持长DOS文件名操作,参考Wengier的启动盘倩完全支持中文长文件名的DOSLFN 0.321版。
5、增加USB驱动器通用支持程序，至少已经成功地支持我的朗科双启动U盘的硬盘方式，理论上也支持USB光驱和硬盘，但我没有这些设备，无法检验。保留最新版的DUSE4.2，提供另一类支持USB硬盘/光驱的备用功能。
6、增加硬盘低级格式化程序LOW，补充原启动盘最缺的硬盘低格功能。
7、增加软景PCTOOLS中英双语版，界面和操作完全仿照PCTOOLS5文件管理工具，可修改隐藏文件、二进制文件等。
8、增加汉化的文件管理器NORTON COMMAND 2,虽然版本旧点且不支持长文件名，但汉化后用起来足够好。
9、增加中文内存信息查看器CMI，比DOS的MEM好上N倍
10、增加SCSI光驱驱动程序，可以驱动SCSI光驱。
11、增加三茗科技的QF程序，当它驻留内存后使用FDISK和FORMAT的速度会大大加快，节省时间
12、增加CTLOAD，在DOS命令行下只需键入CDROM随时加载光驱而不需重新启动。
13、增加在DOS下关闭ATX电源的命令OFF，使DOS也可以像WINDOWS一样实现软件关机。
14、增加NTFSDOS，可在DOS下读取WINNT/2000/XP的NTFS分区信息。
15、采用Wengier修改过的IO.SYS，体积更小，启动更快，性能更稳定。
16、增加CMOSMENU，非常好用的CMOS工具，可以备份/恢复CMOS信息及查CMOS密码
17、采用Wengier编写的FINDCD和FINDRAMD程序，查找光驱和虚拟磁盘更快速准确。
18、增加国标区位码查看程序QW，帮助查找输入中文特殊字符及汉字
19、增加软盘加速工具SMARTFLP，启动时自动加载，据称可提高软盘读写速度达50%，可显著加快启动速度，缩短时间。
20、增加软驱复制工具QCOPY，复制出来的软盘读写速度都会得到显著提高。
21、增加软盘复制工具COPYMAKE，可替代DISKCOPY命令，并能复制某些加密磁盘。
22、增加DOSKEY工具，方便命令行操作。
23、增加磁盘缓冲工具SMARTDRV（需要时手工加载），可大大改善硬盘和光驱的操作性能，加速文件复制和。
24、增加著名的压缩软件RAR2.0汉化版，非常完善的压缩功能。可以供学习备份和压缩
25、增加防死机克星，龚成兵的GH95，死机时按下CTRL+ALT+SHIFT+C可将造成死机的程序全部撤出内存。
26、汉字系统采用天汇3.1压缩改良版，可对DOS命令提示信息自动汉化，速度优于其他中文系统盘用的东方快车。从金山汉字系统中引入全拼双音（ALT-F2）、双拼双音（ALT-F3）、五笔字型（ALT-F4）几种输入法，加上自带的国标区位（ALT-F1）足以满足大多数人的需要。
27、除原有的EDIT外，增加精巧的中文文本文件编辑器ASE，仅有13K。
28、换用支持中文显示的DEBUG程序
打开附件
Dream Chinese WIN98 Boot Disk Version 2 - Simple Explanation
The original Chinese WIN98 boot disk was made by me two years ago. From the current situation, it is somewhat outdated, so I took it to modify again. Considering practicality, I still use the Tianhui Chinese character system. Although the TW system uploaded by the Master Ru in the forum is smaller, its Chinese input method cannot input word groups, which feels too awkward (^_^).
The software on the disk tries to use the localized software as much as possible. This Chinese WIN98 system disk can be used for learning the entry of disk and file operations in DOS, as well as memory management, etc., and can back up the data on the hard disk using USB hard disks and USB flash drives when the WIN system crashes.
Usage. Boot the computer with it, and it will automatically enter the Chinese state. Because the compressed package is relatively large, the speed will be slower than the original WIN98 boot disk, but the compressed package has been optimized, and the speed will be improved compared with the previous version.
This boot disk is made based on the WIN98SE boot disk, retains all the original functions, retains tools such as SCANDISK, EDIT, ATTRIB, supports most IDE optical drives, some USB hard disks, optical drives and USB flash drives (USB electronic disks), and SCSI optical drives, and adds the following new features:
1. Replaced the original FDISK with the localized WIN98 FDISK, so you can perform partition operations in your familiar mother tongue. Note that the WIN98 FDISK will cause errors when used on hard disks larger than 64G.
2. Supplemented two common external commands, XCOPY and DELTREE, from FREEDOS
3. Added the mouse driver program CTMOUSE, which can drive the mouse of the COM and PS2 ports, and only occupies 3K memory
4. Changed to use the DOSLFN long filename driver. When it is resident in memory, it supports long DOS filename operations. Refer to the DOSLFN 0.321 version of Wengier's boot disk that fully supports Chinese long filenames.
5. Added a universal support program for USB drives. At least it has successfully supported the hard disk mode of my Netac dual-boot USB flash drive. In theory, it also supports USB optical drives and hard disks, but I don't have these devices and can't test them. Retained the latest version of DUSE4.2, providing another type of backup function for supporting USB hard disks/optical drives.
6. Added the hard disk low-level formatting program LOW, supplementing the most lacking hard disk low-level formatting function in the original boot disk.
7. Added the soft landscape PCTOOLS Chinese-English bilingual version. The interface and operation are completely modeled after the PCTOOLS5 file management tool, which can modify hidden files, binary files, etc.
8. Added the localized file manager NORTON COMMAND 2. Although the version is a bit old and does not support long filenames, it is good enough to use after localization.
9. Added the Chinese memory information viewer CMI, which is N times better than the DOS MEM.
10. Added the SCSI optical drive driver program, which can drive the SCSI optical drive.
11. Added the QF program of Sanming Technology. When it is resident in memory, the speed of using FDISK and FORMAT will be greatly accelerated, saving time.
12. Added CTLOAD, which only needs to type CDROM at the DOS command line to load the optical drive without restarting.
13. Added the command OFF to turn off the ATX power supply under DOS, so that DOS can also realize software shutdown like WINDOWS.
14. Added NTFSDOS, which can read the NTFS partition information of WINNT/2000/XP under DOS.
15. Adopted the IO.SYS modified by Wengier, which is smaller in size, faster in startup, and more stable in performance.
16. Added CMOSMENU, a very useful CMOS tool, which can back up/restore CMOS information and check CMOS passwords.
17. Adopted the FINDCD and FINDRAMD programs written by Wengier, which can find optical drives and virtual disks more quickly and accurately.
18. Added the national standard stroke code viewing program QW, which helps find Chinese special characters and Chinese characters for input.
19. Added the floppy disk acceleration tool SMARTFLP, which is automatically loaded at startup. It is said that it can increase the floppy disk reading and writing speed by 50%, which can significantly accelerate the startup speed and shorten the time.
20. Added the floppy disk copying tool QCOPY, and the reading and writing speed of the copied floppy disk will be significantly improved.
21. Added the floppy disk copying tool COPYMAKE, which can replace the DISKCOPY command and can copy some encrypted disks.
22. Added the DOSKEY tool, which is convenient for command line operation.
23. Added the disk buffer tool SMARTDRV (manually loaded when needed), which can greatly improve the operation performance of hard disks and optical drives, and accelerate file copying and.
24. Added the famous compression software RAR2.0 localized version, which has a very complete compression function. It can be used for learning backup and compression.
25. Added the anti-freeze buster, Gong Chengbing's GH95. When死机, press CTRL+ALT+SHIFT+C to withdraw all the programs causing死机from memory.
26. The Chinese character system adopts the Tianhui 3.1 compressed improved version, which can automatically localize the DOS command prompt information, and the speed is better than the Oriental Express used by other Chinese system disks. Introduced several input methods from the Kingsoft Chinese character system: full pinyin double tone (ALT-F2), double pinyin double tone (ALT-F3), Wubi font (ALT-F4), plus the built-in national standard stroke code (ALT-F1), which is enough to meet the needs of most people.
27. In addition to the original EDIT, added the delicate Chinese text file editor ASE, which is only 13K.
28. Changed to use the DEBUG program that supports Chinese display.
Open attachment