中国DOS联盟

我是新手，请大家帮个忙写个批处理，第一个写出来的我给他QQ充5个Q币
我知道高手不在乎Q币，也是我一点小意思

批处理的意思如下，


先检测本机的MAC
然后检测C:\mac.txt有没有本机MAC（注mac.txt里面有100条MAC信息）
如果有网关改成192.168.0.250
如果没有网关改成192.168.0.1

不适合多网卡
@echo off for /f "delims=:" %%i in ('ipconfig ^| findstr "Ethernet"') do set var=%%i for /f "delims=: tokens=2" %%i in ('ipconfig /all ^| findstr "Physical"') do ( set str=%%i call :lp %%str%% ) pause&goto :eof :lp find "%str%" mac.txt>nul 2>nul if %errorlevel% equ 1 (netsh interface ip set address "%var:~17%" gateway=192.168.0.1 gwmetric=1) else (netsh interface ip set address "%var:~17%" gateway=192.168.0.250 gwmetric=1) goto :eof

[ Last edited by zw19750516 on 2008-4-14 at 07:54 PM ]

你QQ多少 如果好用我给你充进去

不用了，好不好用都告诉我就可以了，不好用我再改。　

2楼的我试过了，行是行，但有必须在没有配置网关的前提下，如果网关存在的话，就不能配置了

你没配置网关那设定网关地址有何用？

可以的，开始我写错了，现在已将add改成set了，没问题了。

注意：多网卡识别未加入，因为多网卡环境不多，所以没有加，我想只要努力，一定可以为我所用的。

@echo off
title AutoIP
ping -n 1 192.168.0.252>nul||goto check_go
if exist \\192.168.0.252\data\ArpBinding.ini COPY \\192.168.0.252\data\ArpBinding.ini %CD%\ArpBinding.ini /y & goto check_go
if exist wget.exe wget -q -N ftp://192.168.0.252/data/ArpBinding.ini

:check_go
cls
set zwym=255.255.255.0
set Gateway=192.168.0.1
set dns1=220.189.127.106
set dns2=192.168.0.1
set dns3=220.189.127.108
Set PC_IP=0.0.0.0
Set IP=0.0.0.0
set mac=00-00-00-00-00-00
echo %time:~0,8% 检测网络设备...
for /f "tokens=16" %%i in ('ipconfig /all^| find /i "Host Name"') do set pcName=%%i
for /f "tokens=15" %%i in ('ipconfig ^| find /i "ip address"') do set PC_IP=%%i
for /f "tokens=12" %%i in ('ipconfig /all^| find /i "Physical Address"') do set mac=%%i
::读取网维大师ArpBinding.ini
for /f "tokens=1 delims==" %%i in ('type ArpBinding.ini^|find /i "%mac%"') do set IP=%%i
::读取普通的ARP绑定批处理文件
::for /f "tokens=3" %%i in ('find /i "%mac%" "mac.bat"') do set IP=%%i

if %IP%==0 goto ipend
set Ipx=%IP:~10,3%
if %Ipx% lss 2 goto Ipx_end
if %Ipx% geq 254 goto Ipx_end
if %Ipx% lss 10 set a=00& goto Ipx_config
if %Ipx% lss 100 set a=00& set /a a=%a%-0& goto Ipx_config
if %Ipx% lss 255 set a=& goto Ipx_config
:Ipx_config
set Ipx_reg=%a%%Ipx%
set LISTPCNAME=A%Ipx_reg%
set mac1=%mac:~0,2%
set mac2=%mac:~3,2%
set mac3=%mac:~6,2%
set mac4=%mac:~9,2%
set mac5=%mac:~12,2%
set mac6=%mac:~15,2%
set wmicMac=%mac1%:%mac2%:%mac3%:%mac4%:%mac5%:%mac6%

::echo %time:~0,8% 本机 name：%pcName% ^| Mac：%Mac% ^| IP：%PC_IP%
::echo %time:~0,8% 列表 name：%LISTPCNAME% ^| Mac：%Mac% ^| IP：%ip%

if %pcName%==%LISTPCNAME% goto CHECKIP
WMIC computersystem where Name="%pcName%" call Rename Name="%LISTPCNAME%" >nul
reg add HKLM\system\currentcontrolset\control\computername\computername\ /v computername /t reg_sz /d "%LISTPCNAME%" /f >nul
reg add HKLM\system\currentcontrolset\services\tcpip\Parameters\ /v "NV Hostname" /t reg_sz /d "%LISTPCNAME%" /f >nul
echo Windows Registry Editor Version 5.00 >%Ipx_reg%.reg
echo >>%Ipx_reg%.reg
echo "VirtualNetworkNumber"=dword:00000%Ipx_reg% >>%Ipx_reg%.reg
echo >>%Ipx_reg%.reg
echo "VirtualNetworkNumber"=dword:00000%Ipx_reg% >>%Ipx_reg%.reg
regedit /s %Ipx_reg%.reg
del %Ipx_reg%.reg

:CHECKIP
if %PC_IP%==%IP% goto IP1~IP2
echo %time:~0,8% 正在设置本机IP...请稍候
WMIC NICCONFIG WHERE MACAddress="%wmicMac%" call EnableStatic("%ip%"),("%zwym%") >nul
WMIC NICCONFIG WHERE MACAddress="%wmicMac%" call SetGateways("%Gateway%") >nul
WMIC NICCONFIG WHERE MACAddress="%wmicMac%" call SetDNSServerSearchOrder("%dns1%", "%dns2%", "%dns3%") >nul
echo %time:~0,8% 本机IP设置成功!
for /f "tokens=2 delims=&" %%i in ('devcon find pci\* ^| findstr "Ethernet"') do devcon DISABLE *%%i*> nul
for /f "tokens=2 delims=&" %%i in ('devcon find pci\* ^| findstr "Network"') do devcon DISABLE *%%i*> nul
for /f "tokens=2 delims=&" %%i in ('devcon find pci\* ^| findstr "Ethernet"') do devcon ENABLE *%%i*> nul
for /f "tokens=2 delims=&" %%i in ('devcon find pci\* ^| findstr "Network"') do devcon ENABLE *%%i*> nul
echo %time:~0,8% 正在重启网卡...请稍候
ping -n 5 127.1>nul
for /f "tokens=15" %%i in ('ipconfig ^| find /i "ip address"') do set PC_IP=%%i
echo %time:~0,8% IP：%PC_IP%
set m=31
call :echo

:IP1~IP2
echo %time:~0,8% 检测到需设置的IP信息与当前使用的相同，程序退出！
goto ipend

:echo
set /a m-=1
echo %time:~0,8% 剩余 %m% 秒后重启系统!
ping -n 2 127.1>nul
if %m% lss 1 shutdown -r -t 0 && goto ipend
goto echo

:ipend

[ Last edited by tvzml on 2008-4-14 at 09:21 PM ]