|
zjmm1938258
新手上路

积分 10
发帖 3
注册 2007-12-10
状态 离线
|
『楼 主』:
求助: 怎么判断电脑是否支持U盘启动
使用 LLM 解释/回答一下
现在电脑没有软驱了,系统一出问题要用GHOST进行恢复,没有刻录机,做个U盘启动盘较方便,我在网上看了2天,1,用HP格式化U盘,说选启动项,能自动加3个文件,但我做了,提示说没有文件.半途流产.2用下载 的USBOOT引导操作,到中途提示要插入软盘,我的电脑没软驱同时也没98的软盘,也只好作罢,苦闷呀,后来网上又说有的电脑不一定支持U盘启动,因此我怎么来判断我的电脑是否支持,是不是还要努力下去,请高人指点
Now computers don't have floppy drives. When the system has a problem, you need to use GHOST for recovery. Without a burner, making a USB flash drive bootable is more convenient. I spent 2 days online. 1. Used HP to format the USB flash drive and said to select the boot item, which could automatically add 3 files, but when I did it, it prompted that there were no files and the process aborted halfway. 2. Used the downloaded USBOOT to guide the operation, and in the middle, it prompted to insert a floppy disk. My computer doesn't have a floppy drive and also doesn't have a 98 floppy disk, so I had to give up. I'm depressed. Later, I read online that some computers may not necessarily support USB boot. So how do I judge whether my computer supports it? Do I still need to keep trying? Please give me some advice from the experts.
|
|
2007-12-10 17:20 |
|
|
cmyhome
初级用户
 
积分 74
发帖 30
注册 2006-6-1
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
进BIOS,找到启动项,看看有没有USB-HDD;USB-ZIP;USB-FDD这几项,还有就是你的U盘支持上面3种的那一种,两方面都要支持才能用USB启动.
Enter the BIOS, find the boot items, and see if there are items like USB-HDD; USB-ZIP; USB-FDD. Also, which one of the above three types your USB flash drive supports. Both aspects need to be supported to use USB boot.
|
|
2007-12-10 18:16 |
|
|
linyu408
新手上路

积分 4
发帖 2
注册 2007-1-2
状态 离线
|
『第 3 楼』:
使用 LLM 解释/回答一下
2楼的回复我认为是非常的对。
I think the reply on the 2nd floor is very correct.
|
|
2007-12-10 21:54 |
|
|
shanliang8008
银牌会员
    
积分 1148
发帖 514
注册 2007-6-1 来自 河北
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
自动加3个文件,但我做了,提示说没有文件.什么意思 那3个文件是隐藏文件
提示说没有文件 怎么提示的 说的具体点 就好了
Last edited by shanliang8008 on 2007-12-10 at 10:53 PM ]
Automatically add 3 files, but I did it, and it prompted that there were no files. What does that mean? Those 3 files are hidden files. How was the prompt said? Be specific about it.
Last edited by shanliang8008 on 2007-12-10 at 10:53 PM ]
|

我的论坛:http://shanliang8008.31344.com/
我的空间:http://hi.baidu.com/shanliang8008/
|
|
2007-12-10 22:52 |
|
|
shanliang8008
银牌会员
    
积分 1148
发帖 514
注册 2007-6-1 来自 河北
状态 离线
|
『第 5 楼』:
使用 LLM 解释/回答一下
我确定 即使bios里有那几项也可能启动不来 楼主有说提示了 没有文件 还有提示插入软驱 这是不是dos下提示的? 那说明你电脑可以从u盘启动了
I'm sure that even if there are those items in the BIOS, it might not start. The thread starter said there was a prompt that there was no file and also a prompt to insert a floppy disk. Is this the prompt under DOS? Then it means your computer can boot from the USB drive.
|

我的论坛:http://shanliang8008.31344.com/
我的空间:http://hi.baidu.com/shanliang8008/
|
|
2007-12-10 22:54 |
|
|
zjmm1938258
新手上路

积分 10
发帖 3
注册 2007-12-10
状态 离线
|
『第 6 楼』:
使用 LLM 解释/回答一下
谢谢大家的宝贵意见,到现在我还没弄好,按2楼讲的,我打开BIOS查看启动项,里面有USB-ZIP,说明主板是支持U盘启动的,但我的U盘是否支持ZIP就无法检测了,但我已用USBOOT把U盘格式化成ZIPB了,同进还有2个文件,但启动时没有DOS介面,也没有盘符,还请高人指点,
Thanks for everyone's valuable suggestions. Up to now, I haven't got it sorted out. According to what the user on the 2nd floor said, I opened the BIOS to check the boot items. There is USB-ZIP in it, which shows that the motherboard supports USB flash drive booting. But whether my USB flash drive supports ZIP can't be detected. However, I have used USBOOT to format the USB flash drive into ZIPB, and there are 2 more files at the same time. But there is no DOS interface and no drive letter when booting. Please ask the experts for guidance.
|
|
2007-12-12 16:47 |
|
|
yjmubyjmub
初级用户
 
积分 34
发帖 12
注册 2006-2-13
状态 离线
|
『第 7 楼』:
使用 LLM 解释/回答一下
usboot对不容量的U盘支持不是太好,如果你的U盘容量超过256M,建议分两个分区,第一个分区(少于256M)作启动用。。还有就是建议用flashboot作。。MAXDOS站有注册版下载。。
usboot doesn't support U disks with large capacities very well. If your U disk has a capacity exceeding 256M, it is recommended to divide it into two partitions. The first partition (less than 256M) is for booting. Also, it is suggested to use flashboot. There are registered versions for download on the MAXDOS website.
|
|
2008-2-26 12:48 |
|
|
dato
高级用户
   
积分 916
发帖 377
注册 2004-3-8
状态 离线
|
|
2008-2-27 01:29 |
|
|
DOSforever
金牌会员
     
积分 4639
发帖 2239
注册 2005-1-30
状态 离线
|
|
2008-2-27 04:10 |
|
|
hellen
中级用户
  
积分 205
发帖 32
注册 2004-2-6
状态 离线
|
『第 10 楼』:
使用 LLM 解释/回答一下
我还真没试用过U盘启动,很少有人用过这个功能的!
I really haven't tried USB drive booting, and few people use this function!
|
|
2008-2-27 20:54 |
|
|
bigfaint
初级用户
 
积分 70
发帖 30
注册 2008-1-17
状态 离线
|
『第 11 楼』:
使用 LLM 解释/回答一下
恩,我倒是建议找到合适自己U盘的量产工具,做成一个USB光驱。
Well, I would suggest finding a suitable mass production tool for your USB flash drive and making it into a USB CD-ROM.
|
|
2008-2-28 12:36 |
|