批处理发送邮件,群发/多附件/匿名 - 中国DOS联盟论坛

晕！怎么不能传附件？
那我把文章地址贴出来，大家自己去下吧：
http://vkill.xm28.100u.net/read.php?6
下面是代码（反正我看不懂，大虾来解释解释，光有代码没用，还要3个EXE）

::p-mailsend.cmd
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: p-mailsend_v4.0                                                       ::
::                                                                       ::
::           Code by  : vkill                                            ::
::           Thanks   : bjsh,est,lxmxm...                                ::
::           出    处 : http://www.vkill.net http://bbs.cn-dos.net       ::
::           功    能 : 命令行邮件发送程序(群发\多附件\匿名)             ::
::           原    理 : telnet收发邮件的原理                             ::
::           最后更新 : 2007-11-12                                       ::
::           程序依赖文件:nc.exe;rar.exe;base64.exe                      ::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

@echo off&endlocal&setlocal ENABLEDELAYEDEXPANSION
set "t_=test.conf"
::这里是匿名发信的详细设置
set "匿名="QQ邮箱管理员匿名测试" ^<10000@qq.com^>" 

call :del_
set "oneself=%~f0"
if "%1"=="" (
echo 请在命令行下执行 %oneself% /? 查看详细命令行帮助
ping -n 5 127.1 >nul 2>nul  
goto :eof
         )
if "%1"=="/?" goto help
if "%1"=="-?" goto help
for %%? in (/h,-h,--h) do (if "%~1"=="%%?" goto help)
echo.
echo p-mailsend_v4.0  by:vkill
echo _________________________________________________

set/p=依赖文件完整性检查...<nul
set "tools_name=nc.exe;rar.exe;base64.exe"
for %%? in (%tools_name%) do (
if *%%~$PATH:?==* if not exist %%? (
echo no,缺失文件%%? &goto :sleep_
                                  )
                           )
set/p=ok<nul&echo.

set/p=分析参数是否正确...<nul
set n=0
if not "%1"=="" (
:loop_ap
set/a n+=1
if "%1"=="/hu" (set "hu=on" &shift)
if "%1"=="/ht" (set "ht=on" &shift)
if "%1"=="/ch" (set "ch=on" &shift)
if "%1"=="/u" ((for /f "tokens=1-2 delims=@" %%a in ('echo %~2') do (set "user=%%a"& set "server=%%b")) &shift&shift)
if "%1"=="/p" (set "pass=%~2" &shift&shift)
if "%1"=="/t" (set "to=%~2" &shift&shift)
if "%1"=="/s" (set "subject=%~2" &shift&shift)
if "%1"=="/c" (set "content=%~2" &shift&shift)
if "%1"=="/a" (set "accessories=%~2" &shift&shift)
if not "%1"=="" (echo %~1|findstr "^/" >nul 2>nul ||(echo no,参数"%~1"错误&goto :sleep_))
if !n!==10 (echo no,参数"%~1"错误&goto :sleep_)
if not "%1"=="" (goto loop_ap) 
             )
set/p=ok<nul&echo.

set/p=分析必须参数是否缺失...<nul
for %%? in (user server to subject) do (if not defined %%? (echo no&goto :sleep_))
set/p=ok<nul&echo.
if not defined pass (
:inputpass
for /f "tokens=1 delims=:" %%? in ('findstr /N "=Hiddenpass.cmd_s=" "%oneself%"') do (more +%%? %oneself%>"%temp%\a")
for /f "tokens=1 delims=:" %%? in ('findstr /N "=Hiddenpass.cmd_e=" "%oneself%"') do (set/a "a=%%?-1" & more +!a! %oneself%>"%temp%\b")
findstr /V /B /E /G:"%temp%\b" "%temp%\a">"%temp%\pass.cmd"
start /wait cmd /k ""%temp%\pass.cmd" "!user!@!server!""
set/p password=<%temp%\pass
set "pass=!password:~9!"
if not defined pass goto inputpass
del /f/q "%temp%\pass" >nul 2>nul
del /f/q "%temp%\pass.cmd" >nul 2>nul
del /f/q "%temp%\a" >nul 2>nul
del /f/q "%temp%\b" >nul 2>nul
                 )

set/p=验证支持这个地址的邮箱发信否...<nul
for /f "tokens=3-6 delims=," %%a in ('findstr "^::,%server%," "%oneself%"') do (
set "smtp=%%a"&set "port=%%b"&set "认证方式=%%c"&set "max_z=%%d"
                                                                             )
if not defined smtp (echo no&goto :sleep_)
set/p=ok<nul&echo.

set/p=验证网络通否...<nul
for /f "tokens=2 delims=" %%? in ('ping -n 1 %smtp% ^|findstr /i "^ping.*"') do (set "ip=%%?")
if not defined ip (echo no&goto :sleep_)
set/p=ok<nul&echo.

set/p=验证telnet %smtp% %port%通否...<nul
>"%temp%\l%t_%" echo quit
nc -d -nvv %ip% %port% < "%temp%\l%t_%" >"%temp%\p-mailsend.log"
findstr . "%temp%\p-mailsend.log">nul 2>nul||(echo no&goto :sleep_)
set/p=ok<nul&echo.

set/p=验证登陆成功否...<nul
if "%认证方式%"=="1" call :认证方式1
copy "%temp%\%t_%" "%temp%\l%t_%">nul 2>nul
>>"%temp%\l%t_%" echo quit
nc -d -nvv %ip% %port% < "%temp%\l%t_%" >"%temp%\p-mailsend.log"
set n=0
for /f "tokens=1,2* delims=:" %%a in ('findstr /N . "%temp%\p-mailsend.log"') do (set "n=%%a"&set "x%%a=%%b")
set/a n-=1
echo "!x%n%!"|findstr "235 " >nul 2>nul ||(echo no,错误"!x%n%!"&goto :sleep_)
set/p=ok<nul&echo.

::继续写nc配置文件
>>"%temp%\%t_%" echo mail from: ^<%user%@%server%^>
if exist "%to%" (
for /f "tokens=*" %%? in ('findstr "^@" "!to!"') do (set "lto=%%?,!lto!")
             )
if defined lto (set "to=!lto!")
for %%? in (!to!) do (>>"%temp%\%t_%" echo rcpt to: ^<%%?^>)
>>"%temp%\%t_%" echo data
if not defined hu (>>"%temp%\%t_%" echo From: %user%@%server%) else (>>"%temp%\%t_%" echo From: %匿名%)
if not defined ht (>>"%temp%\%t_%" echo To: %to%)
>>"%temp%\%t_%" echo Subject: %subject%
>>"%temp%\%t_%" echo X-mailer: p-mailsend_v4.0 
>>"%temp%\%t_%" echo Mime-Version: 1.0
>>"%temp%\%t_%" echo Content-Type: multipart/mixed;
>>"%temp%\%t_%" echo         boundary="=====vkill====="
>>"%temp%\%t_%" echo.
>>"%temp%\%t_%" echo --=====vkill=====
if defined content call :htmlortxt !content!
>>"%temp%\%t_%" echo         charset="gb2312"
>>"%temp%\%t_%" echo Content-Transfer-Encoding: 7bit
>>"%temp%\%t_%" echo.
if defined content (dir !content! >nul 2>nul &&(type "!content!">>"%temp%\%t_%" &>>"%temp%\%t_%" echo.) ||(>>"%temp%\%t_%" echo !content!)) else (>>"%temp%\%t_%" echo :^))

set z=0
if defined accessories set/p=压缩编码附件中...<nul
echo "%accessories%" |findstr ")" >nul 2>nul && (echo no,附件路径或文件名中不能包含^)&goto :sleep_)
if defined accessories (
for /f "tokens=1,2,3,4,5,6 delims=→" %%a in ('echo %accessories%') do (
   call :压缩编码附件 "%%~a"
   call :压缩编码附件 "%%~b"
   call :压缩编码附件 "%%~c"
   call :压缩编码附件 "%%~d"      
   call :压缩编码附件 "%%~e" 
   call :压缩编码附件 "%%~f"                                 )
                     )
if defined xx (echo no,压缩或编码附件错误&goto :sleep_)
if not !z! lss %max_z% (echo 附件过大,%server%邮箱最大支持附件大小为%max_z%K&goto :sleep_)
if defined accessories (set/p=ok<nul&echo.)
>>"%temp%\%t_%" echo --=====vkill=====--
>>"%temp%\%t_%" echo .
>>"%temp%\%t_%" echo quit

::发信
set/p=发信中...<nul
nc -d -nvv %ip% %port% < ""%temp%\%t_%"" >"%temp%\p-mailsend.log"
for /f "tokens=*" %%? in ("%temp%\p-mailsend.log") do (
if defined vk1 if not defined vk2 (set vk2=0&set "发信错误=%%?"&echo "%%?"|findstr "250 " >nul 2>nul ||(set vk3=0))
echo "%%?"|findstr "354 " >nul 2>nul &&(set vk1=0)
                                          )
if defined vk3 (echo no,错误"!发信错误!"&goto :sleep_)
set/p=ok<nul&echo.

call :del_
echo _________________________________________________
echo 信件发送完成,2秒后退出
ping -n 2 127.1 >nul 2>nul
goto :eof

::all call::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

:help
echo.
echo p-mailsend_v4.0  2007.11  by:vkill  Thanks to bjsh,est,lxmxm...
echo Copyright (C) 2006-2008 http://www.vkill.net http://bbs.cn-dos.net
echo 当前支持的邮箱有:21cn.com,sina.com,163.com,126.com,sohu.com,yahoo.com.cn,qq.com
echo 程序依赖文件:nc.exe;rar.exe;base64.exe
echo 如依赖文件不全请手动到http://www.vkill.net/tools.html上下载到windows目录
echo.
echo Usage: 
echo p-mailsend   /u 用户@地址  /t 收件人 /s 主题   
echo.
echo /hu   匿名发信
echo /ht   隐藏多方发送时别的收件人
echo /u *  用户名@地址 例:/u 122755990@qq.com
echo /p    密码
echo /t *  收件人:(收件人/写好收件人列表的文本文件路径)
echo              (多收件人用,隔开;用""引住) 例:/t "abc@163.com,123@56.com"
echo              (收件人列表的文本文件格式如下:)
echo               a@163.com    
echo               b@163.com  
echo               c@163.com           
echo /s *  主题
echo /c    内容:(文字/写好内容的文本文件路径)
echo /ch   信件内容html格式开关,表示发送的内容为html格式   
echo /a    附件:(绝对/相对路径,多附件用→隔开用""引住) 例:/a "c:\a b.cmd→1234.txt"
goto :eof

:认证方式1
>>"%temp%\%t_%" echo helo vkill
>>"%temp%\%t_%" echo auth login
for %%? in (%user%;%pass%) do (
set/p=%%?^<nul|base64>"l!t_!"
set/p v=<"l!t_!"
>>"%temp%\%t_%" echo !v!
del /f/q "l!t_!"
                           )
goto :eof

:del_
del /f/q "%temp%\%t_%">nul 2>nul
del /f/q "%temp%\l%t_%">nul 2>nul
del /f/q "%temp%\p-mailsend.log">nul 2>nul
goto :eof

:htmlortxt
if "%ch%"=="on" (>>"%temp%\%t_%" echo Content-Type: text/html;) else (>>"%temp%\%t_%" echo Content-Type: text/plain;)
goto :eof

:压缩编码附件
if "%~1"=="" exit/b
if "%~x1"==".rar" (copy "%~1" "%temp%\%~n1_.rar" >nul 2>nul) else (
dir %~1 >nul 2>nul &&(rar.exe -r a "%temp%\%~n1_.rar" "%~1" >nul 2>nul)||(rar.exe a "%temp%\%~n1_.rar" "%~1" >nul 2>nul)
                                                        )
if not exist "%temp%\%~n1_.rar" (set xx=vkill&exit/b)
for %%? in ("%temp%\%~n1_.rar") do (set/a z=z+%%~z?)
>>"%temp%\%t_%" echo --=====vkill=====
>>"%temp%\%t_%" echo Content-Type: application/octet-stream;
>>"%temp%\%t_%" echo         name="%~n1_.rar"
>>"%temp%\%t_%" echo Content-Transfer-Encoding: base64
>>"%temp%\%t_%" echo Content-Disposition: attachment;
>>"%temp%\%t_%" echo         filename="%~n1_.rar"
>>"%temp%\%t_%" echo.
base64.exe -i "%temp%\%~n1_.rar">>"%temp%\%t_%"
>>"%temp%\%t_%" echo.
del /f/q "%temp%\%~n1_.rar" >nul 2>nul
goto :eof

:sleep_
call :del_
ping -n 2 127.1 >nul 2>nul
goto :eof

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

=Hiddenpass.cmd_s=
@echo off 
chcp 437>nul&graftabl 936>nul
echo hP1X500Pf3/f1/5++u5x>in.com
echo (注:输入密码时不明文显示)
set  /p password=请输入mail:%~1的密码:<nul
for /f "tokens=*" %%i in ('in.com') do set password=%%i
del in.com
echo.
>%temp%\pass set password
exit
=Hiddenpass.cmd_e=

:::::::::::::::::::::当前支持的地址::::::::::::::::::::::
::,邮箱地址,smtp地址,telnet smtp端口,认证方式,最大附件大小(k)
::,21cn.com,smtp.21cn.com,25,1,15000000
::,sina.com,smtp.sina.com.cn,25,1,15000000
::,163.com,smtp.163.com,25,1,20000000
::,126.com,smtp.126.com,25,1,20000000
::,sohu.com,smtp.sohu.com,25,1,10000000
::,yahoo.com.cn,smtp.mail.yahoo.com,25,1,15000000
::,yahoo.com,smtp.mail.yahoo.com,25,1,15000000
::,qq.com,smtp.qq.com,25,1,5000000
::

第1楼　huobilie	发表于 2007-11-15 14:47
初级用户　发帖 10　积分 23
[分享]批处理发送邮件,群发/多附件/匿名晕！怎么不能传附件？那我把文章地址贴出来，大家自己去下吧： http://vkill.xm28.100u.net/read.php?6 下面是代码（反正我看不懂，大虾来解释解释，光有代码没用，还要3个EXE） ::p-mailsend.cmd ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: p-mailsend_v4.0 :: :: :: :: Code by : vkill :: :: Thanks : bjsh,est,lxmxm... :: :: 出处 : http://www.vkill.net http://bbs.cn-dos.net :: :: 功能 : 命令行邮件发送程序(群发\多附件\匿名) :: :: 原理 : telnet收发邮件的原理 :: :: 最后更新 : 2007-11-12 :: :: 程序依赖文件:nc.exe;rar.exe;base64.exe :: ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: @echo off&endlocal&setlocal ENABLEDELAYEDEXPANSION set "t_=test.conf" ::这里是匿名发信的详细设置 set "匿名="QQ邮箱管理员匿名测试" ^<10000@qq.com^>" call :del_ set "oneself=%~f0" if "%1"=="" ( echo 请在命令行下执行 %oneself% /? 查看详细命令行帮助 ping -n 5 127.1 >nul 2>nul goto :eof ) if "%1"=="/?" goto help if "%1"=="-?" goto help for %%? in (/h,-h,--h) do (if "%~1"=="%%?" goto help) echo. echo p-mailsend_v4.0 by:vkill echo _________________________________________________ set/p=依赖文件完整性检查...<nul set "tools_name=nc.exe;rar.exe;base64.exe" for %%? in (%tools_name%) do ( if %%~$PATH:?== if not exist %%? ( echo no,缺失文件%%? &goto :sleep_ ) ) set/p=ok<nul&echo. set/p=分析参数是否正确...<nul set n=0 if not "%1"=="" ( :loop_ap set/a n+=1 if "%1"=="/hu" (set "hu=on" &shift) if "%1"=="/ht" (set "ht=on" &shift) if "%1"=="/ch" (set "ch=on" &shift) if "%1"=="/u" ((for /f "tokens=1-2 delims=@" %%a in ('echo %~2') do (set "user=%%a"& set "server=%%b")) &shift&shift) if "%1"=="/p" (set "pass=%~2" &shift&shift) if "%1"=="/t" (set "to=%~2" &shift&shift) if "%1"=="/s" (set "subject=%~2" &shift&shift) if "%1"=="/c" (set "content=%~2" &shift&shift) if "%1"=="/a" (set "accessories=%~2" &shift&shift) if not "%1"=="" (echo %~1\|findstr "^/" >nul 2>nul \|\|(echo no,参数"%~1"错误&goto :sleep_)) if !n!==10 (echo no,参数"%~1"错误&goto :sleep_) if not "%1"=="" (goto loop_ap) ) set/p=ok<nul&echo. set/p=分析必须参数是否缺失...<nul for %%? in (user server to subject) do (if not defined %%? (echo no&goto :sleep_)) set/p=ok<nul&echo. if not defined pass ( :inputpass for /f "tokens=1 delims=:" %%? in ('findstr /N "=Hiddenpass.cmd_s=" "%oneself%"') do (more +%%? %oneself%>"%temp%\a") for /f "tokens=1 delims=:" %%? in ('findstr /N "=Hiddenpass.cmd_e=" "%oneself%"') do (set/a "a=%%?-1" & more +!a! %oneself%>"%temp%\b") findstr /V /B /E /G:"%temp%\b" "%temp%\a">"%temp%\pass.cmd" start /wait cmd /k ""%temp%\pass.cmd" "!user!@!server!"" set/p password=<%temp%\pass set "pass=!password:~9!" if not defined pass goto inputpass del /f/q "%temp%\pass" >nul 2>nul del /f/q "%temp%\pass.cmd" >nul 2>nul del /f/q "%temp%\a" >nul 2>nul del /f/q "%temp%\b" >nul 2>nul ) set/p=验证支持这个地址的邮箱发信否...<nul for /f "tokens=3-6 delims=," %%a in ('findstr "^::,%server%," "%oneself%"') do ( set "smtp=%%a"&set "port=%%b"&set "认证方式=%%c"&set "max_z=%%d" ) if not defined smtp (echo no&goto :sleep_) set/p=ok<nul&echo. set/p=验证网络通否...<nul for /f "tokens=2 delims=" %%? in ('ping -n 1 %smtp% ^\|findstr /i "^ping."') do (set "ip=%%?") if not defined ip (echo no&goto :sleep_) set/p=ok<nul&echo. set/p=验证telnet %smtp% %port%通否...<nul >"%temp%\l%t_%" echo quit nc -d -nvv %ip% %port% < "%temp%\l%t_%" >"%temp%\p-mailsend.log" findstr . "%temp%\p-mailsend.log">nul 2>nul\|\|(echo no&goto :sleep_) set/p=ok<nul&echo. set/p=验证登陆成功否...<nul if "%认证方式%"=="1" call :认证方式1 copy "%temp%\%t_%" "%temp%\l%t_%">nul 2>nul >>"%temp%\l%t_%" echo quit nc -d -nvv %ip% %port% < "%temp%\l%t_%" >"%temp%\p-mailsend.log" set n=0 for /f "tokens=1,2 delims=:" %%a in ('findstr /N . "%temp%\p-mailsend.log"') do (set "n=%%a"&set "x%%a=%%b") set/a n-=1 echo "!x%n%!"\|findstr "235 " >nul 2>nul \|\|(echo no,错误"!x%n%!"&goto :sleep_) set/p=ok<nul&echo. ::继续写nc配置文件 >>"%temp%\%t_%" echo mail from: ^<%user%@%server%^> if exist "%to%" ( for /f "tokens=" %%? in ('findstr "^@" "!to!"') do (set "lto=%%?,!lto!") ) if defined lto (set "to=!lto!") for %%? in (!to!) do (>>"%temp%\%t_%" echo rcpt to: ^<%%?^>) >>"%temp%\%t_%" echo data if not defined hu (>>"%temp%\%t_%" echo From: %user%@%server%) else (>>"%temp%\%t_%" echo From: %匿名%) if not defined ht (>>"%temp%\%t_%" echo To: %to%) >>"%temp%\%t_%" echo Subject: %subject% >>"%temp%\%t_%" echo X-mailer: p-mailsend_v4.0 >>"%temp%\%t_%" echo Mime-Version: 1.0 >>"%temp%\%t_%" echo Content-Type: multipart/mixed; >>"%temp%\%t_%" echo boundary="=====vkill=====" >>"%temp%\%t_%" echo. >>"%temp%\%t_%" echo --=====vkill===== if defined content call :htmlortxt !content! >>"%temp%\%t_%" echo charset="gb2312" >>"%temp%\%t_%" echo Content-Transfer-Encoding: 7bit >>"%temp%\%t_%" echo. if defined content (dir !content! >nul 2>nul &&(type "!content!">>"%temp%\%t_%" &>>"%temp%\%t_%" echo.) \|\|(>>"%temp%\%t_%" echo !content!)) else (>>"%temp%\%t_%" echo :^)) set z=0 if defined accessories set/p=压缩编码附件中...<nul echo "%accessories%" \|findstr ")" >nul 2>nul && (echo no,附件路径或文件名中不能包含^)&goto :sleep_) if defined accessories ( for /f "tokens=1,2,3,4,5,6 delims=→" %%a in ('echo %accessories%') do ( call :压缩编码附件 "%%~a" call :压缩编码附件 "%%~b" call :压缩编码附件 "%%~c" call :压缩编码附件 "%%~d" call :压缩编码附件 "%%~e" call :压缩编码附件 "%%~f" ) ) if defined xx (echo no,压缩或编码附件错误&goto :sleep_) if not !z! lss %max_z% (echo 附件过大,%server%邮箱最大支持附件大小为%max_z%K&goto :sleep_) if defined accessories (set/p=ok<nul&echo.) >>"%temp%\%t_%" echo --=====vkill=====-- >>"%temp%\%t_%" echo . >>"%temp%\%t_%" echo quit ::发信 set/p=发信中...<nul nc -d -nvv %ip% %port% < ""%temp%\%t_%"" >"%temp%\p-mailsend.log" for /f "tokens=" %%? in ("%temp%\p-mailsend.log") do ( if defined vk1 if not defined vk2 (set vk2=0&set "发信错误=%%?"&echo "%%?"\|findstr "250 " >nul 2>nul \|\|(set vk3=0)) echo "%%?"\|findstr "354 " >nul 2>nul &&(set vk1=0) ) if defined vk3 (echo no,错误"!发信错误!"&goto :sleep_) set/p=ok<nul&echo. call :del_ echo _________________________________________________ echo 信件发送完成,2秒后退出 ping -n 2 127.1 >nul 2>nul goto :eof ::all call:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :help echo. echo p-mailsend_v4.0 2007.11 by:vkill Thanks to bjsh,est,lxmxm... echo Copyright (C) 2006-2008 http://www.vkill.net http://bbs.cn-dos.net echo 当前支持的邮箱有:21cn.com,sina.com,163.com,126.com,sohu.com,yahoo.com.cn,qq.com echo 程序依赖文件:nc.exe;rar.exe;base64.exe echo 如依赖文件不全请手动到http://www.vkill.net/tools.html上下载到windows目录 echo. echo Usage: echo p-mailsend /u 用户@地址 /t 收件人 /s 主题 echo. echo /hu 匿名发信 echo /ht 隐藏多方发送时别的收件人 echo /u * 用户名@地址例:/u 122755990@qq.com echo /p 密码 echo /t * 收件人:(收件人/写好收件人列表的文本文件路径) echo (多收件人用,隔开;用""引住) 例:/t "abc@163.com,123@56.com" echo (收件人列表的文本文件格式如下:) echo a@163.com echo b@163.com echo c@163.com echo /s * 主题 echo /c 内容:(文字/写好内容的文本文件路径) echo /ch 信件内容html格式开关,表示发送的内容为html格式 echo /a 附件:(绝对/相对路径,多附件用→隔开用""引住) 例:/a "c:\a b.cmd→1234.txt" goto :eof :认证方式1 >>"%temp%\%t_%" echo helo vkill >>"%temp%\%t_%" echo auth login for %%? in (%user%;%pass%) do ( set/p=%%?^<nul\|base64>"l!t_!" set/p v=<"l!t_!" >>"%temp%\%t_%" echo !v! del /f/q "l!t_!" ) goto :eof :del_ del /f/q "%temp%\%t_%">nul 2>nul del /f/q "%temp%\l%t_%">nul 2>nul del /f/q "%temp%\p-mailsend.log">nul 2>nul goto :eof :htmlortxt if "%ch%"=="on" (>>"%temp%\%t_%" echo Content-Type: text/html;) else (>>"%temp%\%t_%" echo Content-Type: text/plain;) goto :eof :压缩编码附件 if "%~1"=="" exit/b if "%~x1"==".rar" (copy "%~1" "%temp%\%~n1_.rar" >nul 2>nul) else ( dir %~1 >nul 2>nul &&(rar.exe -r a "%temp%\%~n1_.rar" "%~1" >nul 2>nul)\|\|(rar.exe a "%temp%\%~n1_.rar" "%~1" >nul 2>nul) ) if not exist "%temp%\%~n1_.rar" (set xx=vkill&exit/b) for %%? in ("%temp%\%~n1_.rar") do (set/a z=z+%%~z?) >>"%temp%\%t_%" echo --=====vkill===== >>"%temp%\%t_%" echo Content-Type: application/octet-stream; >>"%temp%\%t_%" echo name="%~n1_.rar" >>"%temp%\%t_%" echo Content-Transfer-Encoding: base64 >>"%temp%\%t_%" echo Content-Disposition: attachment; >>"%temp%\%t_%" echo filename="%~n1_.rar" >>"%temp%\%t_%" echo. base64.exe -i "%temp%\%~n1_.rar">>"%temp%\%t_%" >>"%temp%\%t_%" echo. del /f/q "%temp%\%~n1_.rar" >nul 2>nul goto :eof :sleep_ call :del_ ping -n 2 127.1 >nul 2>nul goto :eof :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: =Hiddenpass.cmd_s= @echo off chcp 437>nul&graftabl 936>nul echo hP1X500Pf3/f1/5++u5x>in.com echo (注:输入密码时不明文显示) set /p password=请输入mail:%~1的密码:<nul for /f "tokens=*" %%i in ('in.com') do set password=%%i del in.com echo. >%temp%\pass set password exit =Hiddenpass.cmd_e= :::::::::::::::::::::当前支持的地址:::::::::::::::::::::: ::,邮箱地址,smtp地址,telnet smtp端口,认证方式,最大附件大小(k) ::,21cn.com,smtp.21cn.com,25,1,15000000 ::,sina.com,smtp.sina.com.cn,25,1,15000000 ::,163.com,smtp.163.com,25,1,20000000 ::,126.com,smtp.126.com,25,1,20000000 ::,sohu.com,smtp.sohu.com,25,1,10000000 ::,yahoo.com.cn,smtp.mail.yahoo.com,25,1,15000000 ::,yahoo.com,smtp.mail.yahoo.com,25,1,15000000 ::,qq.com,smtp.qq.com,25,1,5000000 ::

第2楼　bjsh	发表于 2007-11-15 14:51
银牌会员　发帖 621　积分 2,000
呵呵; lz从拿里转来得; 这篇文章正是从这里转出去得; 转了一圈又回家了;

第3楼　vkill	发表于 2007-11-15 22:31
金牌会员　发帖 1,744　积分 4,103　来自甘肃.临泽
解释？去看看telnet发信的原理就明白了 [ Last edited by vkill on 2007-11-15 at 10:32 PM ]

第4楼　zerocq	发表于 2007-11-15 22:35
中级用户　发帖 196　积分 458
这个好长啊,感觉还是用vbs调用winsock方便点,呵呵不过好像无法实现附件功能

第5楼　huobilie	发表于 2007-11-16 09:51
初级用户　发帖 10　积分 23
Originally posted by zerocq at 2007-11-15 10:35 PM: 这个好长啊,感觉还是用vbs调用winsock方便点,呵呵不过好像无法实现附件功能好像有附件功能，看一下帮助吧，我也是转的，不懂 Originally posted by bjsh at 2007-11-15 02:51 PM: 呵呵; lz从拿里转来得; 这篇文章正是从这里转出去得; 转了一圈又回家了; 呵呵，刚来论坛，对论坛还不熟悉，所以不知道有人发过。 [ Last edited by huobilie on 2007-11-16 at 09:53 AM ]

第6楼　bjsh	发表于 2007-11-16 13:55
银牌会员　发帖 621　积分 2,000
Originally posted by huobilie at 2007-11-16 09:51 AM: 呵呵，刚来论坛，对论坛还不熟悉，所以不知道有人发过。 [ Last edited by huobilie on 2007-11-16 at 09:53 AM ] 3楼就是原作者;