只知道是光驱加载和光驱盘符分配的,但是看到有很多种参数用法,但又找不到具体说明,所以请路过的帮我解说一下这两个东东具体加参数用法,
vide-cdd.sys
Shsucdx
[ Last edited by hulongzhuo on 2007-7-7 at 08:39 AM ]
vide-cdd.sys
Shsucdx
[ Last edited by hulongzhuo on 2007-7-7 at 08:39 AM ]
中国DOS联盟
联盟域名：www.cn-dos.net 论坛域名：www.cn-dos.net/forum
DOS，代表着自由开放与发展，我们努力起来，学习FreeDOS和Linux的自由开放与GNU精神，共同创造和发展美好的自由与GNU GPL世界吧！
中国DOS联盟论坛 » DOS启动盘 & LOGO技术 （启动盘室） » vide-cdd.sys & Shsucdx.com
查看 1,431 回复 5
楼 主
vide-cdd.sys & Shsucdx.com
发表于 2007-07-06 11:00 · 中国 广东 东莞 电信
第 2 楼
发表于 2007-07-07 08:39 · 中国 广东 东莞 电信
倒,一个人也不回!!!
第 3 楼
发表于 2007-07-07 09:46 · 中国 河南 洛阳 电信
Examples
========
device=VIDE-CDD.SYS /D:IDE-CD
SHSUCDX /D:SHSU-CDH
SHSUCDX finds the first available drive letter and assigns it to device
unit 0 of the driver SHSU-CDH. If there is a second and/or third CD
drive they are assigned to the next available letters in sequence.
Drive letters in use are skipped. The first CD supported by a driver is
device unit 0 regardless of its SCSI address.
SHSUCDX /D:IDE-CD,F /D:?USB-CD,U /D:*SHSU-CDH,W /L:0
Assign drive F to the IDE-CD driver, or abort if it is not loaded. If
the USB-CD driver is loaded, assign it to drive U; else do nothing. If
the SHSU-CDH driver is loaded, assign it to drive W; else reserve space
for it, so it can be loaded later. SHSUCDX will return the number of
drives assigned (or 252 if aborted).
SHSUCDX /L:0
If SHSUCDX is not installed, it will return 255; otherwise the number of
assigned drives (which can be 0). In either case, nothing is displayed.
SHSUCDX /D:CD001,,1,1 /D:CD001,,4,1
SHSUCDX assigns the first available drive letter to device unit 1 of the
driver CD001 and the next letter to unit 4. This allows access to non-
contiguous drive units without having to support un-needed units.
========
device=VIDE-CDD.SYS /D:IDE-CD
SHSUCDX /D:SHSU-CDH
SHSUCDX finds the first available drive letter and assigns it to device
unit 0 of the driver SHSU-CDH. If there is a second and/or third CD
drive they are assigned to the next available letters in sequence.
Drive letters in use are skipped. The first CD supported by a driver is
device unit 0 regardless of its SCSI address.
SHSUCDX /D:IDE-CD,F /D:?USB-CD,U /D:*SHSU-CDH,W /L:0
Assign drive F to the IDE-CD driver, or abort if it is not loaded. If
the USB-CD driver is loaded, assign it to drive U; else do nothing. If
the SHSU-CDH driver is loaded, assign it to drive W; else reserve space
for it, so it can be loaded later. SHSUCDX will return the number of
drives assigned (or 252 if aborted).
SHSUCDX /L:0
If SHSUCDX is not installed, it will return 255; otherwise the number of
assigned drives (which can be 0). In either case, nothing is displayed.
SHSUCDX /D:CD001,,1,1 /D:CD001,,4,1
SHSUCDX assigns the first available drive letter to device unit 1 of the
driver CD001 and the next letter to unit 4. This allows access to non-
contiguous drive units without having to support un-needed units.
第 4 楼
发表于 2007-07-07 11:36 · 中国 广东 东莞 电信
谢谢楼上的兄弟,不过要是中文解说就好了,
翻译的还是看不懂,
翻译的还是看不懂,
第 5 楼
发表于 2007-07-30 21:44 · 中国 湖北 宜昌 电信
偶也不懂呀
第 6 楼
test
发表于 2008-03-04 01:30 · 中国 湖南 株洲 电信
test
论坛跳转: