请问题急救……（如何在windows下用P处理替换shell32) - 中国DOS联盟论坛

不知道我在联盟收集的这个对你有效不,你试试
老外写的系统文件替换.bat


:: Replacer 2.62 Pre-release
:: www3.telus.net/_/replacer/
:: Email: undefined@telus.net

::系统文件替换
::est翻译，整理

@echo off
title Replacer
:: Check operating system
:: 检查操作系统版本
ver | find "NT" >nul && (
echo/ ! Windows NT not supported.
pause >nul
goto:eof
)
setlocal disabledelayedexpansion enableextensions

:: Use components, if they exist
:: 如果有组建的话则使用组建
if exist "%~dp0Components\*.exe" (
set "path=%~dp0Components;%path%"
title Replacer *
) else (
set "path=%windir%\system32;%path%"
)

:: Temporary directory
:: 临时文件夹
set "dir=%~dp0.ReplacerTemp"
:: Use %tmp% for read-only media
:: 如果是只读存储介质则使用 %tmp% 
if not exist "%dir%" md "%dir%" 2>nul || (
set "dir=%tmp%\.ReplacerTemp"
md "%tmp%\.ReplacerTemp" 2>nul
)

:: Flags used to communicate with other scripts
:: 和其他脚本通讯的flags
set flg="%dir%\..\.Flag_SafeToDel"
set fl2="%dir%\.Flag2_SafeToDel"
:: Files extracted
:: 析出的文件
set vbs="%dir%\Clear_WFP_Message.vbs"
:: Stores rewritten script
:: 保存重写脚本
set "scr=%dir%\.CurrentScript"
:: Stores undo commands, incase system doesn't boot
:: 保存撤销命令，用于系统不重启
set und="%windir%\ReplacerUndo.txt"
:: Stores deleted file
:: 保存删除的文件
set del="%dir%\DeletedFile_SafeToDel"

call:brk Purge

:: The additional VBScript is embedded at the bottom
:: 附加vbs嵌入在最后
findstr/rc:"^" "%~0" >%vbs% 2>nul || (
echo/ ! Embedded file could not be extracted. Try using the Components package from:
echo/   http://www3.telus.net/_/replacer/Components.zip
echo/
echo/Press any key to quit.
pause >nul
call:brk Now
)

:: Check parameters
:: 检查参数
if '%1'=='' (
goto:sys
) else (
echo/"%*" | find "?" >nul && (
  goto:hlp) || (if not '%2'=='' goto:hlp)
)

:scr Manage scripts
cls
title Replacer : %~n1
echo/Checking script...
echo/
call:chk "%~f1" || call:brk
pushd "%~dp1"
:: All scripts must contain a certain string to prevent binary files
:: from accidentally being specified and read as scripts
:: 所有脚本必须包含一个特定的字符串以避免二进制文件被误认为脚本
find/i ";; ReplacerScript" "%~f1" >nul 2>&1 || (
  echo/ ! Invalid Replacer script. It does not contain ";; ReplacerScript".
  echo/
  call:brk
)
copy/v/y "%~f1" "%scr%" >nul
:: Get script format and prompt for each optional file
:: 获得脚本结构，提示每个可选文件
for /f "usebackq tokens=1,2,3,4 delims=, eol=;" %%a in (
  "%scr%") do (
  setlocal
  call:idt "%%~b" "%%~c" "%%~d" "%%~a" && (
   call:exm "%%~a" && call:opt "%%~a"
  )
  endlocal
)
if not exist "%scr%-tmp%" (
  type nul > "%scr%-tmp"
)
copy/v/y "%scr%-tmp" "%scr%" >nul
:: Count files that will be replaced
:: 计算有多少个文件被替换
for /f "tokens=3 delims=:" %%* in (
  'find/c /v "" "%scr%"') do (
  if "%%*"==" 0" (
   echo/ ! No files to replace.
   echo/
   call:brk
  ) else (
   echo/
   echo/%%* file^(s^) will be replaced.
  )
)
echo/
echo/Press any key to start the script.
pause >nul
cls
:: Print and replace each file
:: 现实、替换每个文件
call:vbs
for /f "usebackq tokens=1,2,3,4 delims=, eol=;" %%a in (
  "%scr%") do (
  setlocal
  echo/ * %%~a:
  :: Tokens are: SysFile,Replacement,Ref#,Optional
  :: 令牌环为：系统文件，替换源，引用#，可选项
  call:seq "%%~a" "%%~b" "%%~c" "%%~d"
  echo/
  endlocal
)
type nul > %flg%
echo/
echo/Complete. Reboot to see changes.
echo/Press any key to quit.
pause >nul
del "%scr%"
del "%scr%-tmp"
call:brk Now

:sys Get system file
cls
set "sys="
echo/Drag the ORIGINAL system file to replace into this window.
echo/Then, press enter to continue.
echo/Or, type Q to quit.
call:get sys || goto:sys
call:quo sys
if /i %sys%=="Q" (
  call:brk Now
)
:: If only filename provided, scan for closest match
:: 如果只提供了文件名，则寻找最合适的匹配
if %sys:\=%==%sys% (
  if not %sys:.=%==%sys% (
   call:scn %sys%
  )
)
if defined pth (
  for %%* in (%sys%) do (
   set sys="%pth%%%~nx*"
  )
)
call:chk %sys% || (
  echo/Press any key to continue.
  pause >nul
  goto:sys
)
:: Check if a script was given as system file
:: 检查所给的脚本是否为系统文件
for %%* in (%sys%) do (
  if /i "%%~x*"==".txt" (
   find/i ";; ReplacerScript" %%* >nul && (
    call:scr %%*
   )
  )
)
call:ver %sys% || goto:sys

:mod Get replacement file
cls
set "mod="
echo/Drag the REPLACEMENT %nam% into this window.
if exist %bak% (
  echo/Or, type RESTORE to restore the backup of %nam%.
)
echo/Then, press enter to continue.
echo/Or, type Q to quit.
call:get mod || goto:mod
call:quo mod
if /i %mod%=="Q" call:brk Now
if /i %mod%=="RESTORE" (call:rst || goto:mod)
call:chk %mod% || (
  echo/Press any key to continue.
  pause >nul
  goto:mod
)
if /i %mod%==%sys% (
  echo/ ! A file cannot replace itself.
  echo/
  echo/Press any key to continue.
  pause >nul
) && goto:mod

:cnf Confirm operation
cls
if %mod%==%bak% (
  echo/File will be restored.
) else (
  if exist %bak% (
   echo/File will not be backed up, backup already exists.
  ) else (
   for %%* in (%sys%) do (
    echo/File will be backed up to:
    echo/"%%~dpn*.backup"
   )
  )
)
echo/
echo/The current file:
echo/%sys%
echo/will be replaced with:
echo/%mod%
echo/
echo/Continue? ^(Y/N^)
call:get cnf || goto:cnf
call:quo cnf
if /i not "%cnf:~1,1%"=="Y" call:brk Now
cls

:vbs Start VBScript
:: A flag tells the VBScript when to exit, so WFP messages can still
:: be cleared after Replacer.cmd exits
:: 一个flag可以告诉vbs何时退出，那么当本批处理退出时 Windows文件保护（WFP）就不会有提示
if exist %flg% del %flg%
if not "%atr%"=="non" (
  start "" /belownormal wscript //b %vbs% %flg% || (
   echo/VBScript failed:
   echo/%vbs%
   echo/
  )
)
if exist "%scr%" exit/b

:rep Replace file
if exist %und% del/f %und%
if not exist "%scr%" (
  echo/ * %nam%:
)
:: Overwrite system files with replacement
:: 把系统文件替换了！
if /i not %mod%==%bak% (
  if not exist %bak% (
   echo/   - Backing up...
   call:cpy %sys% %bak%
  )
)
:: Not all files are protected
:: 不是所有的文件都是被保护的
if not "%atr%"=="non" (
  if exist %dll% (
   echo/   - Copying to DllCache...
   call:cpy %mod% %dll%
  )
  if exist %spf% (
   echo/   - Copying to ServicePackFiles...
   call:cpy %mod% %spf%
  )
  if exist %c86% (
   echo/   - Compressing to i386 folder...
   call:cpy %mod% %fil%
   call:cab %fil% %c86%
  )
  if exist %w86% (
   echo/   - Compressing to Windows i386 folder...
   call:cpy %mod% %fil%
   call:cab %fil% %w86%
  )
  if exist %d86% (
   echo/   - Copying to Driver Cache...
   call:cpy %mod% %d86%
  )
)
if /i %mod%==%bak% (
  echo/   - Restoring system file...
) else (
  echo/   - Replacing system file...
)
:: Simply renaming files circumvents WFP:
:: http://virtualplastic.net/html/art_hack.html#winxp
:: 简单的把WFP文件重命名
if exist %dlp% del/f %dlp% 2>nul
ren %sys% %dln% 2>nul || (
  echo/   ! Overwrite failed.
  echo/
  call:brk
)
del/f %dlp% 2>nul || (
  echo/   ! Warning: Temporary file could not be removed:
  echo/     %dlp%
)
call:cpy %mod% %sys%
if exist "%scr%" (
  exit/b
) else (
  type nul > %flg%
)

:fin Finished
echo/
echo/
echo/Complete. Reboot to see changes.
echo/Press any key to quit.
pause >nul
call:brk Now

goto:eof


:get Get input (var)
echo/
set/p "%~1= > " || exit/b1
echo/
exit/b

:quo Quote variable (var)
:: An ugly yet reliable method of removing quotes
:: 一个“丑陋”但是很可靠的删除引号的方法
call set "quo=%%%1%%"
set "quo=###%quo%###"
set "quo=%quo:"###=%"
set "quo=%quo:###"=%"
set "quo=%quo:###=%"
set %1="%quo%"
set "quo="
exit/b

:chk Check file (file)
if not exist %1 (
  echo/ ! File does not exist:
  echo/   %1
  echo/
  exit/b1
)
if exist %1\ (
  echo/ ! Folders not allowed:
  echo/   %1
  echo/
  exit/b1
)
echo/%1 | find "*" >nul && (
  echo/ ! Wildcards ^(*^) not allowed.
  echo/
  exit/b1
)
echo/%1 | find "?" >nul && (
  echo/ ! Wildcards ^(?^) not allowed.
  echo/
  exit/b1
)
exit/b0

:ver Verify file (file)
for %%* in (nam atr bak dll spf
  cab c86 w86 fln d86 dln) do set "%%*="
:: Filename
:: 文件名
set "nam=%~nx1"
:: File path
:: 文件路径
set "pth=%~dp1"
call:\\%~n1 >nul 2>&1 || (
  :: Whether the file is protected
  :: 文件是否被保护
  set "atr=wfp"
)
:: Some files have special filenames when used by WFP
:: 有些文件被WFP保护的时候有特殊的文件名
if not defined fln set "fln=%~nx1"
set "pth=%pth%%nam%"
:: Backup file
:: 备份文件
set bak="%~dpn1.backup"
:: Files to replace
:: 要替换的文件
set dll="%windir%\system32\dllcache\%fln%"
set spf="%windir%\servicepackfiles\i386\%fln%"
set "cab=%fln%"
set "cab=%cab:~0,-1%_"
set c86="%systemdrive%\i386\%cab%"
set w86="%windir%\i386\%cab%"
set d86="%windir%\Driver Cache\i386\%fln%"
:: Temporary copy used when compressing file
:: 压缩文件时的临时副本
set fil="%dir%\%~nx1"
:: Temporary name given to system file
:: 系统文件的临时名称
set dln="%~nx1_SafeToDel"
set dlp="%~f1_SafeToDel"
exit/b0

:rst Restore backup
if not exist %bak% (
  echo/ ! Backup does not exist:
  echo/   %bak%
  echo/
  echo/Press any key to continue.
  pause >nul
  exit/b1
) else (
  set "mod=%bak%"
)
exit/b0

:cpy Copy file (source, target)
if not %2==%sys% (
  attrib -h -r -s %1
  if exist %2 (
   attrib -h -r -s %2
  )
)
copy/v/y %1 %2 >nul 2>&1 || (
  echo/ ! Copy failed.
  echo/
  call:brk
)
:: Write to undo file
:: 写入撤销文件
if /i not %1==%bak% (
  if /i not %2==%bak% (
   >>%und% echo/del %2
   >>%und% echo/copy %bak% %2
  )
)
exit/b

:cab Compress file (source, target)
attrib -r -s -h %2
:: Overwrite compressed backup files (generally in i386 folders)
:: 覆盖压缩的备份文件（通常在 i386 目录）
makecab/v1 %1 %2 >nul 2>&1 || (
  echo/ ! Compress failed.
  echo/
  call:brk
)
del %fil% 2>nul
exit/b

:hlp Display help
echo/Replaces protected system files.
echo/
echo/ Usage:
echo/  %~n0 "ScriptFile"
echo/
echo/ Example:
echo/  %~n0 "C:\Replacer\Script.txt"
echo/
echo/ Script syntax:
echo/  ;; ReplacerScript
echo/  ; Comment
echo/  SystemFileName   
echo/
echo/ Script example:
echo/  ;; ReplacerScript
echo/  ; Replace Notepad, Calc, Paint
echo/  notepad.exe,notepad.new
echo/  calc.exe,files\calc.new
echo/  mspaint.exe,"C:\Files\paint.new"
echo/  ; Prompt to optionally restore Notepad from backup
echo/  notepad.exe,RESTORE,Optional
echo/
echo/ See readme.txt for ReferenceNumber details.
exit/b

:idt Identify script format (last 3 tokens, sys)
:: Ugly method of determining which tokens are which
:: 检查对应令牌环的“丑陋”方法
set "sys=%~4"
if /i "%~1"=="Restore" (
  if "%~2" LSS "9" (
   if "%~2"=="" (
    set "typ=R--"
   ) else (
    if "%~2" GEQ "0" (
     if /i "%~3"=="Optional" (
      set "typ=RNO"
     ) else (
      if /i "%~3"=="" (
       set "typ=RN-"
      )
     )
    )
   )
  ) else (
   if /i "%~2"=="Optional" (
    set "typ=R-O"
   )
  )
) else (
  if "%~1" LSS "9" (
   if "%~1"=="" (
    set "typ=---"
   ) else (
    if "%~1" GEQ "0" (
     if /i "%~2"=="Optional" (
      set "typ=-NO"
     ) else (
      if /i "%~2"=="" (
       set "typ=-N-"
      )
     )
    )
   )
  ) else (
   if /i "%~1"=="Optional" (
    set "typ=--O"
   ) else (
    if "%~2" LSS "9" (
     if "%~2"=="" (
      set "typ=M--"
     ) else (
      if "%~2" GEQ "0" (
       if "%~3"=="" (
        set "typ=MN-"
       ) else (
        if /i "%~3"=="Optional" (
         set "typ=MNO"
        )
       )
      )
     )
    ) else (
     if /i "%~2"=="Optional" (
      set "typ=M-O"
     )
    )
   )
  )
)
if not defined typ (
  echo/ ! Format of line unknown.
  echo/
  exit/b1
) else (
  call:\%typ% "%~1" "%~2" "%~3"
)
exit/b0

:exm Examine script (sys)
call:scn "%~1"
if not exist "%pth%\%~nx1" (
  echo/ ! System file not found:
  echo/   "%~1"
  echo/
  exit/b1
)
if /i not "%mod%"=="Restore" (
  if not exist "%mod%" (
   echo/ ! Replacement file not found:
   echo/   "%mod%"
   echo/
   exit/b1
  )
)
if not "%num%"=="" (
  find/i ":\\%~n1%num%" "%~f0" >nul 2>&1 || (
   echo/ ! Invalid reference number:
   echo/   "%~nx1,%num%"
   echo/
   exit/b1
  )
)
exit/b0

:opt Handles optional lines in scripts (sys)
if /i "%opt%"=="Optional" (
  echo: ? Replace optional file "%~1"? ^(Y/N^)
  setlocal enabledelayedexpansion
  call:get var
  if /i "!var!"=="Y" (
   endlocal
   call:fmt "%sys%,%mod%,%num%,%opt%"
   exit/b
  ) else (
   endlocal
  )
) else (
  call:fmt "%sys%,%mod%,%num%,%opt%"
  exit/b1
)
exit/b0

:fmt Format script
:: Fill in tokens if any are missing
:: 如果有遗漏则填充令牌环
set "var=%~1"
set "var=%var:,,=, ,%"
set "var=%var:,,=, ,%"
>>"%scr%-tmp" echo/%var%
exit/b0

:seq Run sequence (4 ordered tokens)
:: Used when replacing files from script
:: 当用脚本替换文件时使用
set "pth="
if not "%~3"==" " (
  call:\\%~n1%~3
) else (
  call:scn %1
)
set "sys=%pth%%~nx1"
if /i "%~2"=="Restore" (
  set "mod=%pth%%~n1.backup"
) else (
  set "mod=%~f2"
)
call:quo sys
call:quo mod
call:chk %sys% || exit/b
call:chk %mod% || exit/b
call:ver %sys% || exit/b
call:rep
exit/b0

:scn Scan Folders
:: Finds the most likely file match when only filename is given
:: (during scripts or system file input)
:: 如果只给定了文件名，则查找最合适的匹配（在脚本、系统文件输入的时候）
set "pth=%~1"
if not "%pth:\=%" == "%pth%" (
  set "pth=%~dp1"
) else (
  set "pth="
  call:\\%~n10 2>nul && exit/b0
  :: More common paths at top
  :: 通常路径
  for %%* in (
   "%windir%"
   "%windir%\system32"
   "%windir%\system32\drivers"
   "%windir%\system"
   "%programfiles%\Outlook Express"
   "%programfiles%\Windows Media Player"
   "%windir%\Resources\Themes\Luna"
   "%programfiles%\Movie Maker"
   "%programfiles%\Windows NT"
   "%windir%\PCHEALTH\HELPCTR\Binaries"
   "%windir%\Fonts"
   "%programfiles%\Internet Explorer"
   "%programfiles%\Internet Explorer\Connection Wizard"
   "%commonprogramfiles%\Microsoft Shared\MSInfo"
   "%programfiles%\Windows NT\Accessories"
   "%programfiles%\Windows NT\Pinball"
   "%commonprogramfiles%\System"
   "%windir%\system32\Restore"
   "%windir%\system32\srchasst"
   "%windir%\system32\usmt"
   "%commonprogramfiles%\Microsoft Shared\Speech"
   "%programfiles%\NetMeeting"
   "%commonprogramfiles%\System\Mapi\1033"
   "%commonprogramfiles%\Adobe\Calibration"
   "%programfiles%\Symantec\LiveUpdate"
   "%programfiles%\WildTangent\Apps\CDA"
   "%programfiles%\Stardock\Object Desktop\IconPackager"
  ) do (
   if not exist %fl2% (
    if exist "%%~*\%~nx1" (
     set "pth=%%~*\"
     type nul > %fl2%
    )
   )
  )
  if exist %fl2% del %fl2%
)
exit/b0

:brk Exit Replacer ( )
:: Clean up and exit
:: 清理，退出
if not "%~1"=="Purge" (
  if not "%~1"=="Now" (
   echo/
   echo/Press any key to quit.
   pause >nul
  )
)
if /i not "%~1"=="Purge" if exist "%scr%" popd
for %%* in (%vbs% %fil% %flg%
  %fl2% "%scr%" %del% "%scr%-tmp" %dlp%
) do if exist %%* del/f %%* >nul 2>&1
if /i not "%~1"=="Purge" (
  if exist "%dir%" rd "%dir%" 2>nul
  endlocal
  :: Use a hard exit to prevent other loops from continuing
  :: 如果有其他循环则硬退出
  exit
)
exit/b0

:: List of special files requiring more (or less) steps
:: 列出需要更多／更少步骤的特殊文件
:\\Luna
set "fln=luna.mst"
set "atr=wfp"
exit/b0
:\\Shellstyle
if /i not "%pth:Homestead=%"=="%pth%" (
  set "fln=home_ss.dll"
)
if /i not "%pth:Metallic=%"=="%pth%" (
  set "fln=metal_ss.dll"
)
if /i not "%pth:NormalColor=%"=="%pth%" (
  set "fln=blue_ss.dll"
)
if /i not "%pth:\system32\=%"=="%pth%" (
  set "fln=class_ss.dll"
)
set "atr=wfp"
exit/b0
:\\Marlett
set "atr=non"
exit/b
:\\Comctl32
if /i not "%pth%"=="%windir%\system32\" (
  set "atr=non"
)
exit/b
:\\Commdlg
if /i not "%pth%"=="%windir%\system\" (
  set "atr=non"
)
exit/b
:\\Notepad
if /i not "%pth%"=="%windir%\" (
  set "atr=non"
)
exit/b
:\\Uxtheme.dll
set "atr=wfp"
:\\Comctl320
set "pth=%windir%\system32\"
exit/b
:\\Comctl321
set "pth=%windir%\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.0.0_x-ww_1382d70a\"
exit/b
:\\Comctl322
set "pth=%windir%\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.10.0_x-ww_f7fb5805\"
exit/b
:\\Comctl323
set "pth=%windir%\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.1331_x-ww_7abf6d02\"
exit/b
:\\Comctl324
set "pth=%windir%\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.1515_x-ww_7bb98b8a\"
exit/b
:\\Comctl325
set "pth=%windir%\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2180_x-ww_a84f1ff9\"
exit/b
:\\Commdlg0
set "pth=%windir%\system\"
exit/b
:\\Commdlg1
set "pth=%windir%\system32\"
exit/b
:\\Notepad0
set "pth=%windir%\"
exit/b
:\\Notepad1
set "pth=%windir%\system32\"
exit/b
:\\Shellstyle0
set "pth=%windir%\system32\"
exit/b
:\\Shellstyle1
set "pth=%windir%\Resources\Themes\Luna\Shell\NormalColor\"
exit/b
:\\Shellstyle2
set "pth="%windir%\Resources\Themes\Luna\Shell\Metallic\"
exit/b
:\\Shellstyle3
set "pth=%windir%\Resources\Themes\Luna\Shell\Homestead\"
exit/b

:: List of script line formats
:: 脚本行格式的列表
:\RNO
set "mod=Restore"
set "num=%~2"
set "opt=%~3"
exit/b
:\R-O
set "mod=Restore"
set "num="
set "opt=%~2"
exit/b
:\RN-
set "mod=Restore"
set "num=%~2"
set "opt="
exit/b
:\R--
set "mod=Restore"
set "num="
set "opt="
exit/b
:\-N-
set "mod=%sys%"
set "num=%~1"
set "opt="
exit/b
:\-NO
set "mod=%sys%"
set "num=%~1"
set "opt=%~2"
exit/b
:\--O
set "mod=%sys%"
set "num="
set "opt=%~1"
exit/b
:\M--
set "mod=%~1"
set "num="
set "opt="
exit/b
:\MN-
set "mod=%~1"
set "num=%~2"
set "opt="
exit/b
:\M-O
set "mod=%~1"
set "num="
set "opt=%~2"
exit/b
:\MNO
set "mod=%~1"
set "num=%~2"
set "opt=%~3"
exit/b
:\---
set "mod=%sys%"
set "num="
set "opt="
exit/b

:: Clear_WFP_Message.vbs -- clears the WFP message
:: 清除WFP消息的脚本
        ' Clears WFP message
        ' 清楚WFP消息
        const win="Windows File Protection"
        const wi2="Unable To Locate Component"
        set arg=wscript.arguments
        if arg.count then
         flg=arg.item(0)
         else wscript.echo "Bad parameters."
          wscript.quit
        end if
        set w=wscript.createobject("wscript.shell")
        set f=wscript.createobject("scripting.filesystemobject")
        x=999
        while x > 0
         if w.appactivate(win) then
          w.sendkeys "{ESC}"
          w.sendkeys "{TAB}{ENTER}"
         end if
         if w.appactivate(wi2) then
          w.sendkeys "{ESC}{TAB}{ENTER}"
         end if
         if f.fileexists(flg) then
          x=45
          f.deletefile(flg)
         end if
         wscript.sleep 333
         x=x-1
        wend

[ Last edited by qingfushuan on 2007-5-31 at 12:09 PM ]

第1楼　lopmn	发表于 2007-05-30 22:49
初级用户　发帖 20　积分 43
请问题急救……（如何在windows下用P处理替换shell32) 因为做盘的时候忘了把删改键禁掉，现在做好了反删除。可是没办法在windows下替找此shell32.dll文件。哪位能帮帮小弟，不甚感激…… [ Last edited by lopmn on 2007-5-30 at 10:50 PM ]

第2楼　wudixin96	发表于 2007-05-30 22:55
银牌会员　发帖 931　积分 1,928
shell32.dll在windows下。似乎只能改名。再复制到system32下。但也必须重建图标缓存啊。

第3楼　lopmn	发表于 2007-05-30 22:59
初级用户　发帖 20　积分 43
也就是说没有办法在windows下替换吗？

第4楼　wudixin96	发表于 2007-05-30 23:02
银牌会员　发帖 931　积分 1,928
替换是没问题。只是替换后必须重建图标缓存才能显示出替换后的效果。重建图标缓存偶记得似乎可以通过注册表。但忘了怎么操作了。:-)

第5楼　lopmn	发表于 2007-05-30 23:11
初级用户　发帖 20　积分 43
各位大侠不要潜水了。出来帮帮我啊。

第6楼　lopmn	发表于 2007-05-30 23:27
初级用户　发帖 20　积分 43
方法二：修改注册表：对于以前的win版本，一个众所周知的key: hklm \ software \ microsoft \ windows \ currentversion \ explorer 下新建 "maxcachedicons" reg_sz "8000" (8000应该够了吧)，这个key 在win2003中可能是没有效果的。另一个key: hkcu \ control panel \ desktop \ windowmetrics 下的 shell icon size 值放大。如果修改有效，接下来重建icon cache：在显示属性中，如下图：然后增大icon的size，如32->33，apply后再恢复到原来的size，再次确定。

第7楼　lopmn	发表于 2007-05-30 23:28
初级用户　发帖 20　积分 43
找到了个方法不知道能不能用。大侠还在吗？先告诉我怎么在windows下替换shell32文件好吗？我来试一下。

第8楼　lopmn	发表于 2007-05-30 23:41
初级用户　发帖 20　积分 43
晚上没人了。明天再接着等答案。……

第9楼　lopmn	发表于 2007-05-31 00:20
初级用户　发帖 20　积分 43
知道的MM我一下啊。不要再沉默了……

第10楼　fengzi	发表于 2007-05-31 00:24
中级用户　发帖 152　积分 315
挂在其他系统上再替换掉呢`？

第11楼　lopmn	发表于 2007-05-31 11:56
初级用户　发帖 20　积分 43
网吧几百台机器，每台都挂上其它系统那不如重新GHOST了。呵呵

第12楼　qingfushuan	发表于 2007-05-31 12:04
高级用户　发帖 327　积分 502
不知道我在联盟收集的这个对你有效不,你试试老外写的系统文件替换.bat :: Replacer 2.62 Pre-release :: www3.telus.net/_/replacer/ :: Email: undefined@telus.net ::系统文件替换 ::est翻译，整理 @echo off title Replacer :: Check operating system :: 检查操作系统版本 ver \| find "NT" >nul && ( echo/ ! Windows NT not supported. pause >nul goto:eof ) setlocal disabledelayedexpansion enableextensions :: Use components, if they exist :: 如果有组建的话则使用组建 if exist "%~dp0Components\.exe" ( set "path=%~dp0Components;%path%" title Replacer ) else ( set "path=%windir%\system32;%path%" ) :: Temporary directory :: 临时文件夹 set "dir=%~dp0.ReplacerTemp" :: Use %tmp% for read-only media :: 如果是只读存储介质则使用 %tmp% if not exist "%dir%" md "%dir%" 2>nul \|\| ( set "dir=%tmp%\.ReplacerTemp" md "%tmp%\.ReplacerTemp" 2>nul ) :: Flags used to communicate with other scripts :: 和其他脚本通讯的flags set flg="%dir%\..\.Flag_SafeToDel" set fl2="%dir%\.Flag2_SafeToDel" :: Files extracted :: 析出的文件 set vbs="%dir%\Clear_WFP_Message.vbs" :: Stores rewritten script :: 保存重写脚本 set "scr=%dir%\.CurrentScript" :: Stores undo commands, incase system doesn't boot :: 保存撤销命令，用于系统不重启 set und="%windir%\ReplacerUndo.txt" :: Stores deleted file :: 保存删除的文件 set del="%dir%\DeletedFile_SafeToDel" call:brk Purge :: The additional VBScript is embedded at the bottom :: 附加vbs嵌入在最后 findstr/rc:"^" "%~0" >%vbs% 2>nul \|\| ( echo/ ! Embedded file could not be extracted. Try using the Components package from: echo/ http://www3.telus.net/_/replacer/Components.zip echo/ echo/Press any key to quit. pause >nul call:brk Now ) :: Check parameters :: 检查参数 if '%1'=='' ( goto:sys ) else ( echo/"%" \| find "?" >nul && ( goto:hlp) \|\| (if not '%2'=='' goto:hlp) ) :scr Manage scripts cls title Replacer : %~n1 echo/Checking script... echo/ call:chk "%~f1" \|\| call:brk pushd "%~dp1" :: All scripts must contain a certain string to prevent binary files :: from accidentally being specified and read as scripts :: 所有脚本必须包含一个特定的字符串以避免二进制文件被误认为脚本 find/i ";; ReplacerScript" "%~f1" >nul 2>&1 \|\| ( echo/ ! Invalid Replacer script. It does not contain ";; ReplacerScript". echo/ call:brk ) copy/v/y "%~f1" "%scr%" >nul :: Get script format and prompt for each optional file :: 获得脚本结构，提示每个可选文件 for /f "usebackq tokens=1,2,3,4 delims=, eol=;" %%a in ( "%scr%") do ( setlocal call:idt "%%~b" "%%~c" "%%~d" "%%~a" && ( call:exm "%%~a" && call:opt "%%~a" ) endlocal ) if not exist "%scr%-tmp%" ( type nul > "%scr%-tmp" ) copy/v/y "%scr%-tmp" "%scr%" >nul :: Count files that will be replaced :: 计算有多少个文件被替换 for /f "tokens=3 delims=:" %% in ( 'find/c /v "" "%scr%"') do ( if "%%"==" 0" ( echo/ ! No files to replace. echo/ call:brk ) else ( echo/ echo/%% file^(s^) will be replaced. ) ) echo/ echo/Press any key to start the script. pause >nul cls :: Print and replace each file :: 现实、替换每个文件 call:vbs for /f "usebackq tokens=1,2,3,4 delims=, eol=;" %%a in ( "%scr%") do ( setlocal echo/ * %%~a: :: Tokens are: SysFile,Replacement,Ref#,Optional :: 令牌环为：系统文件，替换源，引用#，可选项 call:seq "%%~a" "%%~b" "%%~c" "%%~d" echo/ endlocal ) type nul > %flg% echo/ echo/Complete. Reboot to see changes. echo/Press any key to quit. pause >nul del "%scr%" del "%scr%-tmp" call:brk Now :sys Get system file cls set "sys=" echo/Drag the ORIGINAL system file to replace into this window. echo/Then, press enter to continue. echo/Or, type Q to quit. call:get sys \|\| goto:sys call:quo sys if /i %sys%=="Q" ( call:brk Now ) :: If only filename provided, scan for closest match :: 如果只提供了文件名，则寻找最合适的匹配 if %sys:\=%==%sys% ( if not %sys:.=%==%sys% ( call:scn %sys% ) ) if defined pth ( for %%* in (%sys%) do ( set sys="%pth%%%~nx" ) ) call:chk %sys% \|\| ( echo/Press any key to continue. pause >nul goto:sys ) :: Check if a script was given as system file :: 检查所给的脚本是否为系统文件 for %% in (%sys%) do ( if /i "%%~x"==".txt" ( find/i ";; ReplacerScript" %% >nul && ( call:scr %%* ) ) ) call:ver %sys% \|\| goto:sys :mod Get replacement file cls set "mod=" echo/Drag the REPLACEMENT %nam% into this window. if exist %bak% ( echo/Or, type RESTORE to restore the backup of %nam%. ) echo/Then, press enter to continue. echo/Or, type Q to quit. call:get mod \|\| goto:mod call:quo mod if /i %mod%=="Q" call:brk Now if /i %mod%=="RESTORE" (call:rst \|\| goto:mod) call:chk %mod% \|\| ( echo/Press any key to continue. pause >nul goto:mod ) if /i %mod%==%sys% ( echo/ ! A file cannot replace itself. echo/ echo/Press any key to continue. pause >nul ) && goto:mod :cnf Confirm operation cls if %mod%==%bak% ( echo/File will be restored. ) else ( if exist %bak% ( echo/File will not be backed up, backup already exists. ) else ( for %%* in (%sys%) do ( echo/File will be backed up to: echo/"%%~dpn.backup" ) ) ) echo/ echo/The current file: echo/%sys% echo/will be replaced with: echo/%mod% echo/ echo/Continue? ^(Y/N^) call:get cnf \|\| goto:cnf call:quo cnf if /i not "%cnf:~1,1%"=="Y" call:brk Now cls :vbs Start VBScript :: A flag tells the VBScript when to exit, so WFP messages can still :: be cleared after Replacer.cmd exits :: 一个flag可以告诉vbs何时退出，那么当本批处理退出时 Windows文件保护（WFP）就不会有提示 if exist %flg% del %flg% if not "%atr%"=="non" ( start "" /belownormal wscript //b %vbs% %flg% \|\| ( echo/VBScript failed: echo/%vbs% echo/ ) ) if exist "%scr%" exit/b :rep Replace file if exist %und% del/f %und% if not exist "%scr%" ( echo/ %nam%: ) :: Overwrite system files with replacement :: 把系统文件替换了！ if /i not %mod%==%bak% ( if not exist %bak% ( echo/ - Backing up... call:cpy %sys% %bak% ) ) :: Not all files are protected :: 不是所有的文件都是被保护的 if not "%atr%"=="non" ( if exist %dll% ( echo/ - Copying to DllCache... call:cpy %mod% %dll% ) if exist %spf% ( echo/ - Copying to ServicePackFiles... call:cpy %mod% %spf% ) if exist %c86% ( echo/ - Compressing to i386 folder... call:cpy %mod% %fil% call:cab %fil% %c86% ) if exist %w86% ( echo/ - Compressing to Windows i386 folder... call:cpy %mod% %fil% call:cab %fil% %w86% ) if exist %d86% ( echo/ - Copying to Driver Cache... call:cpy %mod% %d86% ) ) if /i %mod%==%bak% ( echo/ - Restoring system file... ) else ( echo/ - Replacing system file... ) :: Simply renaming files circumvents WFP: :: http://virtualplastic.net/html/art_hack.html#winxp :: 简单的把WFP文件重命名 if exist %dlp% del/f %dlp% 2>nul ren %sys% %dln% 2>nul \|\| ( echo/ ! Overwrite failed. echo/ call:brk ) del/f %dlp% 2>nul \|\| ( echo/ ! Warning: Temporary file could not be removed: echo/ %dlp% ) call:cpy %mod% %sys% if exist "%scr%" ( exit/b ) else ( type nul > %flg% ) :fin Finished echo/ echo/ echo/Complete. Reboot to see changes. echo/Press any key to quit. pause >nul call:brk Now goto:eof :get Get input (var) echo/ set/p "%~1= > " \|\| exit/b1 echo/ exit/b :quo Quote variable (var) :: An ugly yet reliable method of removing quotes :: 一个“丑陋”但是很可靠的删除引号的方法 call set "quo=%%%1%%" set "quo=###%quo%###" set "quo=%quo:"###=%" set "quo=%quo:###"=%" set "quo=%quo:###=%" set %1="%quo%" set "quo=" exit/b :chk Check file (file) if not exist %1 ( echo/ ! File does not exist: echo/ %1 echo/ exit/b1 ) if exist %1\ ( echo/ ! Folders not allowed: echo/ %1 echo/ exit/b1 ) echo/%1 \| find "" >nul && ( echo/ ! Wildcards ^(^) not allowed. echo/ exit/b1 ) echo/%1 \| find "?" >nul && ( echo/ ! Wildcards ^(?^) not allowed. echo/ exit/b1 ) exit/b0 :ver Verify file (file) for %%* in (nam atr bak dll spf cab c86 w86 fln d86 dln) do set "%%=" :: Filename :: 文件名 set "nam=%~nx1" :: File path :: 文件路径 set "pth=%~dp1" call:\\%~n1 >nul 2>&1 \|\| ( :: Whether the file is protected :: 文件是否被保护 set "atr=wfp" ) :: Some files have special filenames when used by WFP :: 有些文件被WFP保护的时候有特殊的文件名 if not defined fln set "fln=%~nx1" set "pth=%pth%%nam%" :: Backup file :: 备份文件 set bak="%~dpn1.backup" :: Files to replace :: 要替换的文件 set dll="%windir%\system32\dllcache\%fln%" set spf="%windir%\servicepackfiles\i386\%fln%" set "cab=%fln%" set "cab=%cab:~0,-1%_" set c86="%systemdrive%\i386\%cab%" set w86="%windir%\i386\%cab%" set d86="%windir%\Driver Cache\i386\%fln%" :: Temporary copy used when compressing file :: 压缩文件时的临时副本 set fil="%dir%\%~nx1" :: Temporary name given to system file :: 系统文件的临时名称 set dln="%~nx1_SafeToDel" set dlp="%~f1_SafeToDel" exit/b0 :rst Restore backup if not exist %bak% ( echo/ ! Backup does not exist: echo/ %bak% echo/ echo/Press any key to continue. pause >nul exit/b1 ) else ( set "mod=%bak%" ) exit/b0 :cpy Copy file (source, target) if not %2==%sys% ( attrib -h -r -s %1 if exist %2 ( attrib -h -r -s %2 ) ) copy/v/y %1 %2 >nul 2>&1 \|\| ( echo/ ! Copy failed. echo/ call:brk ) :: Write to undo file :: 写入撤销文件 if /i not %1==%bak% ( if /i not %2==%bak% ( >>%und% echo/del %2 >>%und% echo/copy %bak% %2 ) ) exit/b :cab Compress file (source, target) attrib -r -s -h %2 :: Overwrite compressed backup files (generally in i386 folders) :: 覆盖压缩的备份文件（通常在 i386 目录） makecab/v1 %1 %2 >nul 2>&1 \|\| ( echo/ ! Compress failed. echo/ call:brk ) del %fil% 2>nul exit/b :hlp Display help echo/Replaces protected system files. echo/ echo/ Usage: echo/ %~n0 "ScriptFile" echo/ echo/ Example: echo/ %~n0 "C:\Replacer\Script.txt" echo/ echo/ Script syntax: echo/ ;; ReplacerScript echo/ ; Comment echo/ SystemFileName echo/ echo/ Script example: echo/ ;; ReplacerScript echo/ ; Replace Notepad, Calc, Paint echo/ notepad.exe,notepad.new echo/ calc.exe,files\calc.new echo/ mspaint.exe,"C:\Files\paint.new" echo/ ; Prompt to optionally restore Notepad from backup echo/ notepad.exe,RESTORE,Optional echo/ echo/ See readme.txt for ReferenceNumber details. exit/b :idt Identify script format (last 3 tokens, sys) :: Ugly method of determining which tokens are which :: 检查对应令牌环的“丑陋”方法 set "sys=%~4" if /i "%~1"=="Restore" ( if "%~2" LSS "9" ( if "%~2"=="" ( set "typ=R--" ) else ( if "%~2" GEQ "0" ( if /i "%~3"=="Optional" ( set "typ=RNO" ) else ( if /i "%~3"=="" ( set "typ=RN-" ) ) ) ) ) else ( if /i "%~2"=="Optional" ( set "typ=R-O" ) ) ) else ( if "%~1" LSS "9" ( if "%~1"=="" ( set "typ=---" ) else ( if "%~1" GEQ "0" ( if /i "%~2"=="Optional" ( set "typ=-NO" ) else ( if /i "%~2"=="" ( set "typ=-N-" ) ) ) ) ) else ( if /i "%~1"=="Optional" ( set "typ=--O" ) else ( if "%~2" LSS "9" ( if "%~2"=="" ( set "typ=M--" ) else ( if "%~2" GEQ "0" ( if "%~3"=="" ( set "typ=MN-" ) else ( if /i "%~3"=="Optional" ( set "typ=MNO" ) ) ) ) ) else ( if /i "%~2"=="Optional" ( set "typ=M-O" ) ) ) ) ) if not defined typ ( echo/ ! Format of line unknown. echo/ exit/b1 ) else ( call:\%typ% "%~1" "%~2" "%~3" ) exit/b0 :exm Examine script (sys) call:scn "%~1" if not exist "%pth%\%~nx1" ( echo/ ! System file not found: echo/ "%~1" echo/ exit/b1 ) if /i not "%mod%"=="Restore" ( if not exist "%mod%" ( echo/ ! Replacement file not found: echo/ "%mod%" echo/ exit/b1 ) ) if not "%num%"=="" ( find/i ":\\%~n1%num%" "%~f0" >nul 2>&1 \|\| ( echo/ ! Invalid reference number: echo/ "%~nx1,%num%" echo/ exit/b1 ) ) exit/b0 :opt Handles optional lines in scripts (sys) if /i "%opt%"=="Optional" ( echo: ? Replace optional file "%~1"? ^(Y/N^) setlocal enabledelayedexpansion call:get var if /i "!var!"=="Y" ( endlocal call:fmt "%sys%,%mod%,%num%,%opt%" exit/b ) else ( endlocal ) ) else ( call:fmt "%sys%,%mod%,%num%,%opt%" exit/b1 ) exit/b0 :fmt Format script :: Fill in tokens if any are missing :: 如果有遗漏则填充令牌环 set "var=%~1" set "var=%var:,,=, ,%" set "var=%var:,,=, ,%" >>"%scr%-tmp" echo/%var% exit/b0 :seq Run sequence (4 ordered tokens) :: Used when replacing files from script :: 当用脚本替换文件时使用 set "pth=" if not "%~3"==" " ( call:\\%~n1%~3 ) else ( call:scn %1 ) set "sys=%pth%%~nx1" if /i "%~2"=="Restore" ( set "mod=%pth%%~n1.backup" ) else ( set "mod=%~f2" ) call:quo sys call:quo mod call:chk %sys% \|\| exit/b call:chk %mod% \|\| exit/b call:ver %sys% \|\| exit/b call:rep exit/b0 :scn Scan Folders :: Finds the most likely file match when only filename is given :: (during scripts or system file input) :: 如果只给定了文件名，则查找最合适的匹配（在脚本、系统文件输入的时候） set "pth=%~1" if not "%pth:\=%" == "%pth%" ( set "pth=%~dp1" ) else ( set "pth=" call:\\%~n10 2>nul && exit/b0 :: More common paths at top :: 通常路径 for %% in ( "%windir%" "%windir%\system32" "%windir%\system32\drivers" "%windir%\system" "%programfiles%\Outlook Express" "%programfiles%\Windows Media Player" "%windir%\Resources\Themes\Luna" "%programfiles%\Movie Maker" "%programfiles%\Windows NT" "%windir%\PCHEALTH\HELPCTR\Binaries" "%windir%\Fonts" "%programfiles%\Internet Explorer" "%programfiles%\Internet Explorer\Connection Wizard" "%commonprogramfiles%\Microsoft Shared\MSInfo" "%programfiles%\Windows NT\Accessories" "%programfiles%\Windows NT\Pinball" "%commonprogramfiles%\System" "%windir%\system32\Restore" "%windir%\system32\srchasst" "%windir%\system32\usmt" "%commonprogramfiles%\Microsoft Shared\Speech" "%programfiles%\NetMeeting" "%commonprogramfiles%\System\Mapi\1033" "%commonprogramfiles%\Adobe\Calibration" "%programfiles%\Symantec\LiveUpdate" "%programfiles%\WildTangent\Apps\CDA" "%programfiles%\Stardock\Object Desktop\IconPackager" ) do ( if not exist %fl2% ( if exist "%%~\%~nx1" ( set "pth=%%~\" type nul > %fl2% ) ) ) if exist %fl2% del %fl2% ) exit/b0 :brk Exit Replacer ( ) :: Clean up and exit :: 清理，退出 if not "%~1"=="Purge" ( if not "%~1"=="Now" ( echo/ echo/Press any key to quit. pause >nul ) ) if /i not "%~1"=="Purge" if exist "%scr%" popd for %%* in (%vbs% %fil% %flg% %fl2% "%scr%" %del% "%scr%-tmp" %dlp% ) do if exist %%* del/f %%* >nul 2>&1 if /i not "%~1"=="Purge" ( if exist "%dir%" rd "%dir%" 2>nul endlocal :: Use a hard exit to prevent other loops from continuing :: 如果有其他循环则硬退出 exit ) exit/b0 :: List of special files requiring more (or less) steps :: 列出需要更多／更少步骤的特殊文件 :\\Luna set "fln=luna.mst" set "atr=wfp" exit/b0 :\\Shellstyle if /i not "%pth:Homestead=%"=="%pth%" ( set "fln=home_ss.dll" ) if /i not "%pth:Metallic=%"=="%pth%" ( set "fln=metal_ss.dll" ) if /i not "%pth:NormalColor=%"=="%pth%" ( set "fln=blue_ss.dll" ) if /i not "%pth:\system32\=%"=="%pth%" ( set "fln=class_ss.dll" ) set "atr=wfp" exit/b0 :\\Marlett set "atr=non" exit/b :\\Comctl32 if /i not "%pth%"=="%windir%\system32\" ( set "atr=non" ) exit/b :\\Commdlg if /i not "%pth%"=="%windir%\system\" ( set "atr=non" ) exit/b :\\Notepad if /i not "%pth%"=="%windir%\" ( set "atr=non" ) exit/b :\\Uxtheme.dll set "atr=wfp" :\\Comctl320 set "pth=%windir%\system32\" exit/b :\\Comctl321 set "pth=%windir%\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.0.0_x-ww_1382d70a\" exit/b :\\Comctl322 set "pth=%windir%\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.10.0_x-ww_f7fb5805\" exit/b :\\Comctl323 set "pth=%windir%\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.1331_x-ww_7abf6d02\" exit/b :\\Comctl324 set "pth=%windir%\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.1515_x-ww_7bb98b8a\" exit/b :\\Comctl325 set "pth=%windir%\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2180_x-ww_a84f1ff9\" exit/b :\\Commdlg0 set "pth=%windir%\system\" exit/b :\\Commdlg1 set "pth=%windir%\system32\" exit/b :\\Notepad0 set "pth=%windir%\" exit/b :\\Notepad1 set "pth=%windir%\system32\" exit/b :\\Shellstyle0 set "pth=%windir%\system32\" exit/b :\\Shellstyle1 set "pth=%windir%\Resources\Themes\Luna\Shell\NormalColor\" exit/b :\\Shellstyle2 set "pth="%windir%\Resources\Themes\Luna\Shell\Metallic\" exit/b :\\Shellstyle3 set "pth=%windir%\Resources\Themes\Luna\Shell\Homestead\" exit/b :: List of script line formats :: 脚本行格式的列表 :\RNO set "mod=Restore" set "num=%~2" set "opt=%~3" exit/b :\R-O set "mod=Restore" set "num=" set "opt=%~2" exit/b :\RN- set "mod=Restore" set "num=%~2" set "opt=" exit/b :\R-- set "mod=Restore" set "num=" set "opt=" exit/b :\-N- set "mod=%sys%" set "num=%~1" set "opt=" exit/b :\-NO set "mod=%sys%" set "num=%~1" set "opt=%~2" exit/b :\--O set "mod=%sys%" set "num=" set "opt=%~1" exit/b :\M-- set "mod=%~1" set "num=" set "opt=" exit/b :\MN- set "mod=%~1" set "num=%~2" set "opt=" exit/b :\M-O set "mod=%~1" set "num=" set "opt=%~2" exit/b :\MNO set "mod=%~1" set "num=%~2" set "opt=%~3" exit/b :\--- set "mod=%sys%" set "num=" set "opt=" exit/b :: Clear_WFP_Message.vbs -- clears the WFP message :: 清除WFP消息的脚本 ' Clears WFP message ' 清楚WFP消息 const win="Windows File Protection" const wi2="Unable To Locate Component" set arg=wscript.arguments if arg.count then flg=arg.item(0) else wscript.echo "Bad parameters." wscript.quit end if set w=wscript.createobject("wscript.shell") set f=wscript.createobject("scripting.filesystemobject") x=999 while x > 0 if w.appactivate(win) then w.sendkeys "{ESC}" w.sendkeys "{TAB}{ENTER}" end if if w.appactivate(wi2) then w.sendkeys "{ESC}{TAB}{ENTER}" end if if f.fileexists(flg) then x=45 f.deletefile(flg) end if wscript.sleep 333 x=x-1 wend [ Last edited by qingfushuan on 2007-5-31 at 12:09 PM ]

第13楼　slore	发表于 2007-05-31 13:43
铂金会员　发帖 2,478　积分 5,212
外国人的replace.bat

第14楼　lopmn	发表于 2007-05-31 15:50
初级用户　发帖 20　积分 43
我拷，外国人就是吊，这么复杂。我是看都看不懂。。。。

第15楼　lopmn	发表于 2007-05-31 16:00
初级用户　发帖 20　积分 43
算了。谢谢大家