回复所有的DOS下联网问题的帖子 - 中国DOS联盟论坛

看了DOS下联网启动盘的帖子。有些问题如扫描多种网卡并加载驱动，输入ip地址等似乎没有很好地解决。我找到了一个renda的DOS下联网启动盘，用了一下，觉得不错。现把说明贴出来，供朋友们参考。
我在 autoexec.bat 里看不懂它的扫描多种网卡并加载驱动和输入ip地址的方法，期盼版主几各位大家给予分析。在此多多拜托。谢谢

来源 http://spaces.msn.com/davidrin/blog/cns!BC68D429D6B9F757!739.entry?_c=BlogPart

config.sys:
; DOSNETX/7 DOS CONFIG File for MSDOS 7.10
; (c) 2007, David Rin <rendaa@gmail.com>
; Rev. 6.70216

DEVICE=\DOS\HIMEM.SYS /TESTMEM:OFF /SHADOWRAM:OFF
DEVICE=\DOS\EMM386.EXE NOEMS I=B000-B7FF VERBOSE
INCLUDE=DOSCFG

DEVICEHIGH /s=\DOS\IFSHLP.SYS
DEVICEHIGH /s=\DOS\ELTORIT0.SYS /D:EMUCD$
INSTALL=\DOS\XMSDSK.EXE v: 16000 /t /y

DOS=HIGH,UMB,AUTO
SHELL=COMMAND.COM /p /e:1024 /f
STACKSHIGH=9,256
BUFFERSHIGH=30,0
FILESHIGH=30
FCBSHIGH=4,0
LASTDRIVEHIGH=Z
SWITCHES=/F /N
INCLUDE=DOSAPP
SET PATH=\DOS

MENUITEM=DOSOPT,DOS only, with utilities cached to ramdisk
SUBMENU =DATDRV,Data Storage support (CDROM/USBHD/UDMA etc.)
MENUITEM=NETOPT,Network support only
SUBMENU =NETCD ,Network + IDE/USB/PCMCIA CDROM support
SUBMENU =NAKED ,Clean boot for update bios (edit.com available)
MENUDEFAULT=NETCD,5

DEVICEHIGH /s=\DOS\RAMFD.SYS

INCLUDE=DOSOPT
DEVICEHIGH /s=\DOS\IDECDROM.SYS /D:IDECD$
SET DSKDEV=IDE

INCLUDE=DOSOPT
INCLUDE=RAMFD
DEVICEHIGH /s=\DOS\USBASPI.SYS /norst /w /r /v /f
DEVICEHIGH /s=\DOS\USBCD.SYS /D:USBCD$
DEVICEHIGH /s=\DOS\DI1000DD.SYS
DEVICEHIGH /s=\DOS\IDECDROM.SYS /D:IDECD$
SET DSKDEV=USB

INCLUDE=DOSOPT
INCLUDE=RAMFD
DEVICEHIGH /s=\DOS\SBP2ASPI.SYS
DEVICEHIGH /s=\DOS\NJ32DISK.SYS
DEVICEHIGH /s=\DOS\CDSDMINI.SYS /D:FWCD$
DEVICEHIGH /s=\DOS\IDECDROM.SYS /D:IDECD$
SET DSKDEV=FW

INCLUDE=DOSOPT
INCLUDE=RAMFD
;Read %RAMDRIVE%\NET\README.TXT for driver parameters.
DEVICEHIGH /s=\DOS\PCMI80CL.SYS /P1 /QA
DEVICEHIGH /s=\DOS\STATPCDM.SYS /D:PCMCD$
SET DSKDEV=PCM

INCLUDE=DOSOPT
DEVICEHIGH /s=\DOS\XDMA.SYS

MENUITEM=IDE ,IDE CD
MENUITEM=USB ,USB CD/HD/FD + IDECD
MENUITEM=FW ,1394/Firewire CD/HD + IDECD
MENUITEM=PCM ,PCMCIA CD + IDECD
MENUITEM=XDMA,UltraDMA HDD
SUBMENU =MENU,<<< Return
MENUDEFAULT=MENU

INCLUDE=DOSOPT
INCLUDE=MYNET

MENUITEM=NIDE,IDE CD
MENUITEM=NUSB,USB CD/HD/FD
MENUITEM=NFW ,1394/Firewire CD/HD
MENUITEM=NPCM,PCMCIA CD
SUBMENU =MENU,<<< Return
MENUDEFAULT=NIDE,3

INCLUDE=IDE
INCLUDE=MYNET

INCLUDE=USB
INCLUDE=MYNET

INCLUDE=FW
INCLUDE=MYNET

INCLUDE=PCM
INCLUDE=MYNET

MENUITEM=DOSCMD,DOS in conventional memory
MENUITEM=NKDHIM,DOS + HIMEM
MENUITEM=NKDXMS,DOS + HIMEM + EMM386 (XMS only)
MENUITEM=NKDEMS,DOS + HIMEM + EMM386 (XMS/EMS)
SUBMENU =MENU,<<< Return
MENUDEFAULT=NKDXMS

DEVICE=\DOS\HIMEM.SYS /TESTMEM:OFF /SHADOWRAM:OFF
DOS=HIGH,UMB,AUTO
SET CONFIG=DOSCMD

DEVICE=\DOS\HIMEM.SYS /TESTMEM:OFF /SHADOWRAM:OFF
DEVICE=\DOS\EMM386.EXE NOEMS VERBOSE
DOS=HIGH,UMB,AUTO
SET CONFIG=DOSCMD

DEVICE=\DOS\HIMEM.SYS /TESTMEM:OFF /SHADOWRAM:OFF
DEVICE=\DOS\EMM386.EXE RAM VERBOSE
DOS=HIGH,UMB,AUTO
SET CONFIG=DOSCMD

;Read %RAMDRIVE%\NET\README.TXT for details of customization.
;Of couse, you won't find it there in clean-boot modes.
SET MODS=ASK

autoexec.bat:
: DOSNETX/7 DOS AUTOEXEC Batch File
: (c) 1997-2007, David Rin <rendaa@gmail.com>
: Rev 6.70216
:
@if .%debug%==. echo off
if .%rtd%==. set rtd=C:
for %%f in (A: A:\DOS) do if .%comspec%==.%%f\COMMAND.COM set rtd=A:
if .%0==. if exist \DOS\DOSKEY.* lh /s \DOS\DOSKEY /insert /b:2048
if .%0==. if exist %rtd%\dos\nul path %rtd%\DOS
if not .%0==. goto _bat_chain
if not .%config%==.DOSCMD goto _normal
if exist \DOS\DOSMACRO.BAT call \DOS\DOSMACRO.BAT
goto _end

:_normal
if exist EMMQXXX0 set lh=lh /s
set bootstage=yes
if .%debug%==. ctty nul
if .%ramdrive%==. if exist \DOS\DOSDRIVE.BAT call \DOS\DOSDRIVE.BAT
ctty con
if not .%ramdrive%==. goto _ramd_ok
echo RAMDRIVE is not available!
goto _eof

:~apath
if .%3==. goto _eof
if not exist %3\nul goto _eof
set @@=%path%
set path=%3
set @=%path%
set path=%@@%
set @@=
for %%f in (%path%) do if .%%f==.%@% goto ~0_apath
path %path%;%@%
:~0_apath
set @=
goto _eof

:~expand
if .%3==. goto _eof
if not exist %3 goto _eof
copy %3 $.exe>nul
echo A|$.exe>nul
del $.exe>nul
goto _eof

:~extract
if .%3==. goto _eof
if not exist %3 goto _eof
for %%f in (%path% .) do if exist %%f\extract.exe goto ~extr1
goto _eof
:~extr1
extract /y /a /e %3 >nul
goto _eof

:_ramd_ok
if .%bootstage%==. goto _end
if .%debug%==. ctty nul
if exist %rtd%\AUTOEXEC.BAT copy %rtd%\AUTOEXEC.BAT %ramdrive%\ /y>nul
ctty con
if exist %ramdrive%\AUTOEXEC.BAT %ramdrive%\AUTOEXEC.BAT

:_bat_chain
if .%1==.: if not .%2==. goto %2
if .%debug%==. ctty nul
\DOS\FINDRAMD
if not .%RAMDRIVE%==. set temp=%RAMDRIVE%\
if exist EMMQXXX0 if exist %ramdrive%\dos\peruse.* %lh% peruse /x384
set netdir=%rtd%\NET
goto _dont_cache_netdir

set netdir=%ramdrive%\_
if exist %netdir%\*.* echo y|del %netdir%>nul
if not exist %netdir%\nul goto _mk_tmp
echo y|del %netdir%>nul
:_mk_tmp
if not exist %netdir%\nul md %netdir%
if exist %rtd%\net\nul copy %rtd%\net %netdir% /y>nul

:_dont_cache_netdir
ctty con
set DOSTSR=DO MD MC
if exist %ramdrive%\DOS\DOSDRIVE.BAT call %ramdrive%\DOS\DOSDRIVE.BAT : ~dostsr
%ramdrive%
if not exist \net\nul md\net
path %ramdrive%\dos;%ramdrive%\net
set temp=%ramdrive%\NET
if .%rtd%==.C: for %%f in (dos net) do call %0 : ~apath %rtd%\%%f
set netdrive=O:
if exist %netdrive%\nul subst %netdrive% /D>nul
subst %netdrive% %ramdrive%\>nul
%netdrive%
cd \net
if .%debug%==. ctty nul
for %%f in (%netdir%\DOSNETX!.exe %netdir%\DRVP*.exe) do call %0 : ~expand %%f
for %%f in (%netdir%\DOSNETX!.cab %netdir%\DRVP*.cab) do call %0 : ~extract %%f
set apcd=
if .%cdrom%==. goto _drv_cd_not_ready
for %%f in (%cdrom%) do call %0 : ~apcd_ck %%f
:_drv_cd_not_ready
for %%f in (.DOS .COM .EXE .BAT .INI .SYS .CFG .IN_ .PWL .CAB .) do if exist %netdir%\*%%f copy %netdir%\*%%f . /y>nul
if .%netdir%==.%rtd%\NET goto _no_tmp
if not exist %netdir%\nul goto _no_tmp
echo y|del %netdir%>nul
if exist %netdir%\nul rd %netdir%>nul
:_no_tmp
set netdir=
for %%f in (DOSNETX!.* DRVP*.EXE DRVP*.CAB) do if exist %%f del %%f
ctty con
:call %0 : ~remap
if .%MODS%==. goto _no_net
set _err=
if exist MSNET.BAT call MSNET.BAT
goto _exit

:~apcd_ck
if .%3==. goto _eof
if not .%apcd%==. goto _eof
dready %3
if errorlevel 2 goto _eof
%comspec% /F /C if not exist %3\NDISDRV\DRVPAK.bat if not exist %3\NDISDRV\DRVP*.EXE goto _eof
set apcd=%3
for %%f in (%apcd%\NDISDRV\DRVP*.exe) do call %0 : ~expand %%f
for %%f in (%apcd%\NDISDRV\DRVP*.cab) do call %0 : ~extract %%f
if exist %apcd%\NDISDRV\DRVPAK.BAT call %apcd%\NDISDRV\DRVPAK.BAT
goto _eof

:_no_net
if exist %ramdrive%\DOS\SMARTDRV.* %ramdrive%\DOS\SMARTDRV /q

:_exit
cd %rtd%\
cd %ramdrive%\
cd %netdrive%\
%ramdrive%
set bootstage=
dready c:
if not errorlevel 2 for %%f in (DOS NET) do call %0 : ~apath c:\%%f
if .%rtd%==. goto _end
if not .%_err%==. goto _end
if not errorlevel 2 if exist %rtd%\AUTORUN.BAT %rtd%\AUTORUN.BAT
if not %rtd%==C: goto _apcd_chain
dready d:
if not errorlevel 2 if exist D:\AUTORUN.BAT D:\AUTORUN.BAT
goto _end

:~remap
if .%rfd%==. set rfd=A:
if not exist $RAMFDD$ goto _eof
if not .%rfd%==.A: goto _eof
if exist %ramdrive%\DOS\REMAPFDD.* %lh% %ramdrive%\DOS\REMAPFDD B: /D:0
for %%f in (C D E F G H I J K L M N O P Q R S T U V W X Y Z) do call %0 : ~setrfd %%f:
goto _eof

:~setrfd
if .%3==. goto _eof
if .%rfd%==.+ echo Remap logical drive %3 to floppy drive %rtd%...
if .%rfd%==.+ set rfd=%3
if not .%rfd%==%3 if %3==%ramdrive% set rfd=+
goto _eof

:~apcd_chain
if .%3==. goto _eof
dready %3
if not errorlevel 2 if exist %3\AUTORUN.BAT %3\AUTORUN.BAT
goto _eof

:_apcd_chain
if not .%apcd%==. call %0 : ~apcd_chain %apcd%
if not .%apcd%==. goto _end
for %%f in (%cdrom%) do call %0 : ~apcd_chain %%f

:_end
set _err=
set bootstage=

:_eof

第1楼　lizhenduo	发表于 2007-05-24 14:17
初级用户　发帖 29　积分 190
回复所有的DOS下联网问题的帖子看了DOS下联网启动盘的帖子。有些问题如扫描多种网卡并加载驱动，输入ip地址等似乎没有很好地解决。我找到了一个renda的DOS下联网启动盘，用了一下，觉得不错。现把说明贴出来，供朋友们参考。我在 autoexec.bat 里看不懂它的扫描多种网卡并加载驱动和输入ip地址的方法，期盼版主几各位大家给予分析。在此多多拜托。谢谢来源 http://spaces.msn.com/davidrin/blog/cns!BC68D429D6B9F757!739.entry?_c=BlogPart config.sys: ; DOSNETX/7 DOS CONFIG File for MSDOS 7.10 ; (c) 2007, David Rin <rendaa@gmail.com> ; Rev. 6.70216 DEVICE=\DOS\HIMEM.SYS /TESTMEM:OFF /SHADOWRAM:OFF DEVICE=\DOS\EMM386.EXE NOEMS I=B000-B7FF VERBOSE INCLUDE=DOSCFG DEVICEHIGH /s=\DOS\IFSHLP.SYS DEVICEHIGH /s=\DOS\ELTORIT0.SYS /D:EMUCD$ INSTALL=\DOS\XMSDSK.EXE v: 16000 /t /y DOS=HIGH,UMB,AUTO SHELL=COMMAND.COM /p /e:1024 /f STACKSHIGH=9,256 BUFFERSHIGH=30,0 FILESHIGH=30 FCBSHIGH=4,0 LASTDRIVEHIGH=Z SWITCHES=/F /N INCLUDE=DOSAPP SET PATH=\DOS MENUITEM=DOSOPT,DOS only, with utilities cached to ramdisk SUBMENU =DATDRV,Data Storage support (CDROM/USBHD/UDMA etc.) MENUITEM=NETOPT,Network support only SUBMENU =NETCD ,Network + IDE/USB/PCMCIA CDROM support SUBMENU =NAKED ,Clean boot for update bios (edit.com available) MENUDEFAULT=NETCD,5 DEVICEHIGH /s=\DOS\RAMFD.SYS INCLUDE=DOSOPT DEVICEHIGH /s=\DOS\IDECDROM.SYS /D:IDECD$ SET DSKDEV=IDE INCLUDE=DOSOPT INCLUDE=RAMFD DEVICEHIGH /s=\DOS\USBASPI.SYS /norst /w /r /v /f DEVICEHIGH /s=\DOS\USBCD.SYS /D:USBCD$ DEVICEHIGH /s=\DOS\DI1000DD.SYS DEVICEHIGH /s=\DOS\IDECDROM.SYS /D:IDECD$ SET DSKDEV=USB INCLUDE=DOSOPT INCLUDE=RAMFD DEVICEHIGH /s=\DOS\SBP2ASPI.SYS DEVICEHIGH /s=\DOS\NJ32DISK.SYS DEVICEHIGH /s=\DOS\CDSDMINI.SYS /D:FWCD$ DEVICEHIGH /s=\DOS\IDECDROM.SYS /D:IDECD$ SET DSKDEV=FW INCLUDE=DOSOPT INCLUDE=RAMFD ;Read %RAMDRIVE%\NET\README.TXT for driver parameters. DEVICEHIGH /s=\DOS\PCMI80CL.SYS /P1 /QA DEVICEHIGH /s=\DOS\STATPCDM.SYS /D:PCMCD$ SET DSKDEV=PCM INCLUDE=DOSOPT DEVICEHIGH /s=\DOS\XDMA.SYS MENUITEM=IDE ,IDE CD MENUITEM=USB ,USB CD/HD/FD + IDECD MENUITEM=FW ,1394/Firewire CD/HD + IDECD MENUITEM=PCM ,PCMCIA CD + IDECD MENUITEM=XDMA,UltraDMA HDD SUBMENU =MENU,<<< Return MENUDEFAULT=MENU INCLUDE=DOSOPT INCLUDE=MYNET MENUITEM=NIDE,IDE CD MENUITEM=NUSB,USB CD/HD/FD MENUITEM=NFW ,1394/Firewire CD/HD MENUITEM=NPCM,PCMCIA CD SUBMENU =MENU,<<< Return MENUDEFAULT=NIDE,3 INCLUDE=IDE INCLUDE=MYNET INCLUDE=USB INCLUDE=MYNET INCLUDE=FW INCLUDE=MYNET INCLUDE=PCM INCLUDE=MYNET MENUITEM=DOSCMD,DOS in conventional memory MENUITEM=NKDHIM,DOS + HIMEM MENUITEM=NKDXMS,DOS + HIMEM + EMM386 (XMS only) MENUITEM=NKDEMS,DOS + HIMEM + EMM386 (XMS/EMS) SUBMENU =MENU,<<< Return MENUDEFAULT=NKDXMS DEVICE=\DOS\HIMEM.SYS /TESTMEM:OFF /SHADOWRAM:OFF DOS=HIGH,UMB,AUTO SET CONFIG=DOSCMD DEVICE=\DOS\HIMEM.SYS /TESTMEM:OFF /SHADOWRAM:OFF DEVICE=\DOS\EMM386.EXE NOEMS VERBOSE DOS=HIGH,UMB,AUTO SET CONFIG=DOSCMD DEVICE=\DOS\HIMEM.SYS /TESTMEM:OFF /SHADOWRAM:OFF DEVICE=\DOS\EMM386.EXE RAM VERBOSE DOS=HIGH,UMB,AUTO SET CONFIG=DOSCMD ;Read %RAMDRIVE%\NET\README.TXT for details of customization. ;Of couse, you won't find it there in clean-boot modes. SET MODS=ASK autoexec.bat: : DOSNETX/7 DOS AUTOEXEC Batch File : (c) 1997-2007, David Rin <rendaa@gmail.com> : Rev 6.70216 : @if .%debug%==. echo off if .%rtd%==. set rtd=C: for %%f in (A: A:\DOS) do if .%comspec%==.%%f\COMMAND.COM set rtd=A: if .%0==. if exist \DOS\DOSKEY.* lh /s \DOS\DOSKEY /insert /b:2048 if .%0==. if exist %rtd%\dos\nul path %rtd%\DOS if not .%0==. goto _bat_chain if not .%config%==.DOSCMD goto _normal if exist \DOS\DOSMACRO.BAT call \DOS\DOSMACRO.BAT goto _end :_normal if exist EMMQXXX0 set lh=lh /s set bootstage=yes if .%debug%==. ctty nul if .%ramdrive%==. if exist \DOS\DOSDRIVE.BAT call \DOS\DOSDRIVE.BAT ctty con if not .%ramdrive%==. goto _ramd_ok echo RAMDRIVE is not available! goto _eof :~apath if .%3==. goto _eof if not exist %3\nul goto _eof set @@=%path% set path=%3 set @=%path% set path=%@@% set @@= for %%f in (%path%) do if .%%f==.%@% goto ~0_apath path %path%;%@% :~0_apath set @= goto _eof :~expand if .%3==. goto _eof if not exist %3 goto _eof copy %3 $.exe>nul echo A\|$.exe>nul del $.exe>nul goto _eof :~extract if .%3==. goto _eof if not exist %3 goto _eof for %%f in (%path% .) do if exist %%f\extract.exe goto ~extr1 goto _eof :~extr1 extract /y /a /e %3 >nul goto _eof :_ramd_ok if .%bootstage%==. goto _end if .%debug%==. ctty nul if exist %rtd%\AUTOEXEC.BAT copy %rtd%\AUTOEXEC.BAT %ramdrive%\ /y>nul ctty con if exist %ramdrive%\AUTOEXEC.BAT %ramdrive%\AUTOEXEC.BAT :_bat_chain if .%1==.: if not .%2==. goto %2 if .%debug%==. ctty nul \DOS\FINDRAMD if not .%RAMDRIVE%==. set temp=%RAMDRIVE%\ if exist EMMQXXX0 if exist %ramdrive%\dos\peruse.* %lh% peruse /x384 set netdir=%rtd%\NET goto _dont_cache_netdir set netdir=%ramdrive%\_ if exist %netdir%\. echo y\|del %netdir%>nul if not exist %netdir%\nul goto _mk_tmp echo y\|del %netdir%>nul :_mk_tmp if not exist %netdir%\nul md %netdir% if exist %rtd%\net\nul copy %rtd%\net %netdir% /y>nul :_dont_cache_netdir ctty con set DOSTSR=DO MD MC if exist %ramdrive%\DOS\DOSDRIVE.BAT call %ramdrive%\DOS\DOSDRIVE.BAT : ~dostsr %ramdrive% if not exist \net\nul md\net path %ramdrive%\dos;%ramdrive%\net set temp=%ramdrive%\NET if .%rtd%==.C: for %%f in (dos net) do call %0 : ~apath %rtd%\%%f set netdrive=O: if exist %netdrive%\nul subst %netdrive% /D>nul subst %netdrive% %ramdrive%\>nul %netdrive% cd \net if .%debug%==. ctty nul for %%f in (%netdir%\DOSNETX!.exe %netdir%\DRVP.exe) do call %0 : ~expand %%f for %%f in (%netdir%\DOSNETX!.cab %netdir%\DRVP.cab) do call %0 : ~extract %%f set apcd= if .%cdrom%==. goto _drv_cd_not_ready for %%f in (%cdrom%) do call %0 : ~apcd_ck %%f :_drv_cd_not_ready for %%f in (.DOS .COM .EXE .BAT .INI .SYS .CFG .IN_ .PWL .CAB .) do if exist %netdir%\%%f copy %netdir%\%%f . /y>nul if .%netdir%==.%rtd%\NET goto _no_tmp if not exist %netdir%\nul goto _no_tmp echo y\|del %netdir%>nul if exist %netdir%\nul rd %netdir%>nul :_no_tmp set netdir= for %%f in (DOSNETX!.* DRVP.EXE DRVP.CAB) do if exist %%f del %%f ctty con :call %0 : ~remap if .%MODS%==. goto _no_net set _err= if exist MSNET.BAT call MSNET.BAT goto _exit :~apcd_ck if .%3==. goto _eof if not .%apcd%==. goto _eof dready %3 if errorlevel 2 goto _eof %comspec% /F /C if not exist %3\NDISDRV\DRVPAK.bat if not exist %3\NDISDRV\DRVP.EXE goto _eof set apcd=%3 for %%f in (%apcd%\NDISDRV\DRVP.exe) do call %0 : ~expand %%f for %%f in (%apcd%\NDISDRV\DRVP.cab) do call %0 : ~extract %%f if exist %apcd%\NDISDRV\DRVPAK.BAT call %apcd%\NDISDRV\DRVPAK.BAT goto _eof :_no_net if exist %ramdrive%\DOS\SMARTDRV. %ramdrive%\DOS\SMARTDRV /q :_exit cd %rtd%\ cd %ramdrive%\ cd %netdrive%\ %ramdrive% set bootstage= dready c: if not errorlevel 2 for %%f in (DOS NET) do call %0 : ~apath c:\%%f if .%rtd%==. goto _end if not .%_err%==. goto _end if not errorlevel 2 if exist %rtd%\AUTORUN.BAT %rtd%\AUTORUN.BAT if not %rtd%==C: goto _apcd_chain dready d: if not errorlevel 2 if exist D:\AUTORUN.BAT D:\AUTORUN.BAT goto _end :~remap if .%rfd%==. set rfd=A: if not exist $RAMFDD$ goto _eof if not .%rfd%==.A: goto _eof if exist %ramdrive%\DOS\REMAPFDD.* %lh% %ramdrive%\DOS\REMAPFDD B: /D:0 for %%f in (C D E F G H I J K L M N O P Q R S T U V W X Y Z) do call %0 : ~setrfd %%f: goto _eof :~setrfd if .%3==. goto _eof if .%rfd%==.+ echo Remap logical drive %3 to floppy drive %rtd%... if .%rfd%==.+ set rfd=%3 if not .%rfd%==%3 if %3==%ramdrive% set rfd=+ goto _eof :~apcd_chain if .%3==. goto _eof dready %3 if not errorlevel 2 if exist %3\AUTORUN.BAT %3\AUTORUN.BAT goto _eof :_apcd_chain if not .%apcd%==. call %0 : ~apcd_chain %apcd% if not .%apcd%==. goto _end for %%f in (%cdrom%) do call %0 : ~apcd_chain %%f :_end set _err= set bootstage= :_eof

第2楼　xugaohui	发表于 2007-05-29 20:53
高级用户　发帖 293　积分 774　来自湖北仙桃
早就解决这个问题了：只需要一个图形操作界面，支持鼠标操作，自动检测网卡，也可以手动选择网卡，当主板有两块相同的网卡也可以分别驱动其中一块网卡。可自由使用一种或多种网络协议 ms的 tcp/ip ipx netbeui三种，并特别支持ibm tcip/ip，可设置每种协议的具体参数，可启动文件共享和打印功能。支持网卡数远远超过同类软件。

第3楼　lizhenduo	发表于 2007-05-30 14:54
初级用户　发帖 29　积分 190
Originally posted by xugaohui at 2007-5-29 08:53 PM: 早就解决这个问题了：只需要一个图形操作界面，支持鼠标操作，自动检测网卡，也可以手动选择网卡，当主板有两块相同的网卡也可以分别驱动其 ... 谢谢,我真是孤陋寡闻. 能发个镜像吗?我真的很需要. 谢谢! 烦请能说一下自动搜索网卡并加载驱动和输入ip地址等的原理方法吧.谢谢

第4楼　john12900	发表于 2007-06-08 08:14
初级用户　发帖 40　积分 95
yyy 那个网站的镜像文件怎么下不下来，能发一个吗？

第5楼　john12900	发表于 2007-06-13 08:33
初级用户　发帖 40　积分 95
yyy 终于下载下来了，谁能把那些搜索驱动之类的东东提取出来，就是可以集成到自己启动盘里那种？？谢谢了

第6楼　xbbin	发表于 2007-06-20 13:55
初级用户　发帖 10　积分 20
没看明白，我还是不知道怎么玩

第7楼　zyroy000	发表于 2008-05-18 18:04
初级用户　发帖 13　积分 30
收藏

第8楼　fly2sky	发表于 2008-06-01 18:14
新手上路　发帖 2　积分 4
2楼的那个软件真是太好了，没想到DOS下还有那么好的工具

第9楼　jpcainiao	发表于 2008-06-30 22:07
新手上路　发帖 5　积分 14
请问二楼的朋友,你的这个软件我试用了一下,不过每次都默认选择MS的TCP/IP协议及自动为动态IP,图上所示的默认参数在那个文件上可以设定? 还有想请教一下,在DOS下如何使用批处理加载ms的 tcp/ip ipx netbeui和ibm tcip/ip协议,如果我只是想在DOS下查看一下WINDOWS2003的共享(局域网内),应该加载上面四种协议中的那一种才更好些?其分别对应或必需加载的网卡驱动类型又是哪一种? 望能解答一下.不胜感激!!

第10楼　xugaohui	发表于 2008-07-02 04:54
高级用户　发帖 293　积分 774　来自湖北仙桃
回楼上的：参数在runnet.bat文件中设置。最好是采用ibm tcp/ip. 都是使用ndis2驱动。

第11楼　wangtk1982	发表于 2008-07-03 22:57
新手上路　发帖 6　积分 12
xugaohui: 你好！现在这个img下载不了了，请大侠给一份吧我需要在纯dos下telnet进入终端设备原站说的那个支持telnet的img不知道大侠有没有，先谢过了我的邮箱：wangtk1982@sohu.com

第12楼　snowground	发表于 2008-07-04 21:49
新手上路　发帖 4　积分 8
牛人真多 ,

第13楼　netwinxp	发表于 2008-07-08 17:12
高级用户　发帖 366　积分 741
嘿嘿俺有纯DOS下用硬MODEM拨号上BBS的PPPD.EXE [ Last edited by netwinxp on 2008-7-8 at 05:16 PM ]

第14楼　bsfmig	发表于 2008-08-01 23:12
新手上路　发帖 4　积分 7
无法下载是因为Google Pages被墙了，请使用代理服务器。

第15楼　GOTOmsdos	发表于 2008-08-21 13:53
铂金会员　发帖 1,827　积分 5,154
Originally posted by xugaohui at 2007-5-29 08:53 PM: 早就解决这个问题了：只需要一个图形操作界面，支持鼠标操作，自动检测网卡，也可以手动选择网卡，当主板有两块相同的网卡也可以分别驱动其 ... 嗯，看起来非常强大，我来试试。。。。。