如何在98启动软盘里加载SATA光驱？ - 中国DOS联盟论坛



menuitem=IDE_CDROM, Start computer with IDE/ATAPI CD-ROM support.
menuitem=OAK_CDROM, Start computer with other IDE/ATAPI CD-ROM support.
menuitem=USB_CDROM, Start computer with USB CD-ROM support.
menuitem=SATA_CDROM, Start computer with SATA CD-ROM support.
menudefault=IDE_CDROM,30
menucolor=7,0


devicehigh=himem.sys /testmem:off
device=IDECD.sys /D:idecd001
devicehigh=ramdrive.sys /E 4096


devicehigh=himem.sys /testmem:off
device=oakcdrom.sys /D:idecd001
devicehigh=ramdrive.sys /E 4096


devicehigh=himem.sys /testmem:off
devicehigh=usb\ramfd.sys
devicehigh=usb\usbaspi.sys
devicehigh=usb\di1000dd.sys
devicehigh=usb\usbcd.sys /d:USB-CD
devicehigh=Usbmass.exe
devicehigh=ramdrive.sys /E 4096


devicehigh=himem.sys /testmem:off
DEVICE=GCDROM.SYS /D:MSCD000 /C0
DEVICE=GCDROM.SYS /D:MSCD001 /C1
DEVICE=GCDROM.SYS /D:MSCD002 /C2
devicehigh=ramdrive.sys /E 4096



files=20
buffers=30
dos=high,umb
stacks=9,256
lastdrive=z
SWITCHES=/N /F

第1楼　aliu	发表于 2007-03-26 02:02
新手上路　发帖 4　积分 10
如何在98启动软盘里加载SATA光驱？求助如何在98启动软盘里加载SATA光驱？希望可以在98启动软盘了里可以加入STAT光驱的驱动，引导SATA光驱启动，读取光盘上的文件和程序。 [ Last edited by aliu on 2007-3-25 at 01:04 PM ]

第2楼　lianjiang2004	发表于 2007-03-26 02:09
金牌会员　发帖 1,884　积分 3,946
加gcdrom

第3楼　bc12060101	发表于 2007-03-26 02:09
银牌会员　发帖 712　积分 1,455
嘿嘿，加入SATA光驱驱动（还得改写一下CONFIG.SYS文件）应该是gcdrom.sys吧。

第4楼　aliu	发表于 2007-03-26 04:21
新手上路　发帖 4　积分 10
能否详细的说明在98启动盘内CONFIG.SYS该如何改写？万分感谢

第5楼　barton	发表于 2007-03-28 23:48
中级用户　发帖 197　积分 480　来自黄冈
menuitem=IDE_CDROM, Start computer with IDE/ATAPI CD-ROM support. menuitem=OAK_CDROM, Start computer with other IDE/ATAPI CD-ROM support. menuitem=USB_CDROM, Start computer with USB CD-ROM support. menuitem=SATA_CDROM, Start computer with SATA CD-ROM support. menudefault=IDE_CDROM,30 menucolor=7,0 devicehigh=himem.sys /testmem:off device=IDECD.sys /D:idecd001 devicehigh=ramdrive.sys /E 4096 devicehigh=himem.sys /testmem:off device=oakcdrom.sys /D:idecd001 devicehigh=ramdrive.sys /E 4096 devicehigh=himem.sys /testmem:off devicehigh=usb\ramfd.sys devicehigh=usb\usbaspi.sys devicehigh=usb\di1000dd.sys devicehigh=usb\usbcd.sys /d:USB-CD devicehigh=Usbmass.exe devicehigh=ramdrive.sys /E 4096 devicehigh=himem.sys /testmem:off DEVICE=GCDROM.SYS /D:MSCD000 /C0 DEVICE=GCDROM.SYS /D:MSCD001 /C1 DEVICE=GCDROM.SYS /D:MSCD002 /C2 devicehigh=ramdrive.sys /E 4096 files=20 buffers=30 dos=high,umb stacks=9,256 lastdrive=z SWITCHES=/N /F