|
proof
高级用户
   
积分 687
发帖 222
注册 2005-8-21
状态 离线
|
『楼 主』:
GHOST 恢复过程中 A:\GHOSTERR.TXT 错误原因考
使用 LLM 解释/回答一下
刻录了一张光盘,上面包含GHOST程序和一个500M的磁盘映像C.GHO
从光盘向硬盘恢复C.GHO,工作到75%,进程停止,提示:
Output error file to the following location:
A:\GHOSTERR.TXT
OK Cancel
反复几次,都是停在75%
运行硬盘上的GHOST程序,选用硬盘上的C.GHO映像,恢复成功;
运行硬盘上的GHOST程序,选用光盘上的C.GHO映像,恢复成功;
运行光盘上的GHOST程序,选用硬盘上的C.GHO映像,恢复成功;
唯独运行光盘上的GHOST程序,选用光盘上的C.GHO映像,恢复进程到75%,失败。
搜索网上的答案,有以下几种:
1. 光驱、光盘质量问题;
2. 光盘损耗太大,映像文件损坏;
3. GHOST版本问题;
4. 主板、内存问题;
5. 分区、FORMAT硬盘、FAT32格式;
都是胡话,人云亦云,以讹传讹。根据是:
1. 光驱、光盘质量问题;
那么多用户的光驱、光盘都有问题?我的光驱做别的工作时都正常。
2. 光盘损耗太大,映像文件损坏;
我用GHOST把光盘C.GHO映像文件check了一遍,没有问题,成功通过。
3. GHOST版本问题;
难道GHOST制作公司会犯这种错误?
4. 主板、内存问题;
害得多少用户折腾一天。
5. 分区、FORMAT硬盘;
这招更损。
我就是用现在的硬盘环境制作的GHO映像文件。
Burned a CD containing the GHOST program and a 500M disk image C.GHO. When restoring C.GHO from the CD to the hard drive, it stopped at 75% and the prompt was:
Output error file to the following location:
A:\GHOSTERR.TXT
OK Cancel
It stopped at 75% repeatedly.
Running the GHOST program on the hard drive, selecting the C.GHO image on the hard drive, the restoration was successful;
Running the GHOST program on the hard drive, selecting the C.GHO image on the CD, the restoration was successful;
Running the GHOST program on the CD, selecting the C.GHO image on the hard drive, the restoration was successful;
Only when running the GHOST program on the CD, selecting the C.GHO image on the CD, the restoration process stopped at 75% and failed.
Searched online for answers, and there were the following kinds:
1. Problem with the CD drive or CD quality;
2. The CD is too worn and the image file is damaged;
3. Problem with the GHOST version;
4. Problem with the motherboard or memory;
5. Partition, FORMAT hard drive, FAT32 format;
All nonsense, people repeating what others say without verification. The reasons are:
1. Problem with the CD drive or CD quality;
So many users have problems with their CD drives or CDs? My CD drive works normally for other tasks.
2. The CD is too worn and the image file is damaged;
I checked the CD C.GHO image file with GHOST and it was fine, passed successfully.
3. Problem with the GHOST version;
Could the GHOST production company make such a mistake?
4. Problem with the motherboard or memory;
Made many users toss about for a day.
5. Partition, FORMAT hard drive;
This move is even more vicious.
I made the GHO image file using the current hard drive environment.
|
|
2007-1-30 08:50 |
|
|
lianjiang2004
金牌会员
     
积分 3946
发帖 1884
注册 2006-1-20
状态 离线
|
|
2007-1-30 09:00 |
|
|
NaturalJ0
银牌会员
    
积分 1181
发帖 533
注册 2006-8-14
状态 离线
|
『第 3 楼』:
使用 LLM 解释/回答一下
你改下参数,把那个GHOSTERR.TXT存到硬盘上去,然后再看看里面提示什么错。
You modify the parameters, save that GHOSTERR.TXT to the hard disk, and then see what errors are indicated in it.
|
|
2007-1-31 00:52 |
|
|
wtpublic
初级用户
 
积分 199
发帖 46
注册 2004-11-10
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
直接从光盘执行Ghost安装时,读盘过程中偶尔出错且重试后又正常的信息,需要存为 Log 文件记录下来(即:GHOSTERR.TXT ),恰巧当前盘 A:又是不可写的虚拟盘,所以异常终止了。
当前盘为硬盘的时候,偶尔出现的类似如下信息就可以成功地存入Log文件了:
Read error, retrying...OK (反正诸如此类吧)
谁能保证每次读光盘头一趟就能成功读出?多试几次能读出光盘信息本已无大碍,大可以继续安装……
所以,我分析还是归因于 Ghost 程序的异常处理太过敏感了。本来,把重试OK的情况忽略掉,就没前面遭遇的那回事了,又何必那么较真呢?适得其反啊。
When directly executing Ghost installation from the CD, occasional errors occur during the reading process and it returns to normal after retrying. The information needs to be saved as a Log file (i.e., GHOSTERR.TXT). Coincidentally, the current drive A: is an unwritable virtual drive, so it terminated abnormally.
When the current drive is a hard disk, the similar information like the following that occasionally appears can be successfully saved into the Log file:
Read error, retrying...OK (and so on like this)
Who can guarantee that the first pass of reading the CD header will succeed? Trying several times to read the CD information is already not a big deal, and you can continue the installation...
So, I analyze that it is still due to the overly sensitive exception handling of the Ghost program. Originally, if the situation of retrying OK is ignored, there would be no previous problems. Why be so serious? It backfires.
|
|
2007-2-1 16:08 |
|
|
ksuday
初级用户
 
积分 38
发帖 19
注册 2006-10-22
状态 离线
|
『第 5 楼』:
使用 LLM 解释/回答一下
我也遇到过,换了盘就没事了
I also encountered this, and it was fine after changing the disk.
|
|
2007-2-4 05:22 |
|
|
proof
高级用户
   
积分 687
发帖 222
注册 2005-8-21
状态 离线
|
『第 6 楼』:
使用 LLM 解释/回答一下
Originally posted by wtpublic at 16:08:
直接从光盘执行Ghost安装时,读盘过程中偶尔出错且重试后又正常的信息,需要存为 Log 文件记录下来(即:GHOSTERR.TXT ),恰巧当前盘 A:又是不可写的 ...
同意这种解释。
我也感觉是Ghost软件的一个bug
Originally posted by wtpublic at 16:08:
When directly executing Ghost installation from the CD, occasionally an error occurs during the reading process and it works normally after retrying. This information needs to be saved as a Log file (i.e., GHOSTERR.TXT). It so happens that the current drive A: is not writable...
Agree with this explanation.
I also feel it is a bug of the Ghost software
|
|
2007-2-4 12:13 |
|
|
wtpublic
初级用户
 
积分 199
发帖 46
注册 2004-11-10
状态 离线
|
『第 7 楼』:
使用 LLM 解释/回答一下
Originally posted by proof at 2007-2-4 12:13 PM:
同意这种解释。
我也感觉是Ghost软件的一个bug
这个,恐怕还不能算是 Ghost 的 Bug,要怪只能怪人家过于严谨了、要求太高。
Originally posted by proof at 2007-2-4 12:13 PM:
Agree with this explanation.
I also feel it's a bug of Ghost software
Well, this can't really be regarded as a bug of Ghost. It can only be blamed on others being too rigorous and having too high requirements.
|
|
2007-2-8 13:11 |
|
|
zjnbwdj
中级用户
  
积分 300
发帖 137
注册 2005-11-4
状态 离线
|
『第 8 楼』:
使用 LLM 解释/回答一下
据我看大多是光盘超刻所致,现在好多光盘都标称可以刻录710M甚至更多的数据,但据我测试,刻录超过650M就有可能造成刻录的数据损坏或者不完整,但硬盘分区往往较大,所以完全可以容得下GHO文件,楼主可以看下自己刻盘时的数据大小.(PS:我曾刻录过好几张加入了大量常用软件的XP光盘,大小接近700M,结果是往硬盘刻窿时,ghost进度到99%就出现如楼主所说的提示,心痛不已啊.)
In my opinion, most of it is caused by CD overburning. Now many CDs are labeled as able to burn data of 710M or even more, but according to my tests, burning more than 650M may cause the burned data to be damaged or incomplete. However, hard drive partitions are often relatively large, so they can definitely accommodate GHO files. The owner can check the size of the data when burning the CD. (PS: I once burned several XP CDs with a large number of common software added, and the size was close to 700M. As a result, when restoring to the hard drive, the ghost progress reached 99% and then the prompt as the owner said appeared. It was really heart - breaking.)
|
|
2007-2-9 10:30 |
|
|
proof
高级用户
   
积分 687
发帖 222
注册 2005-8-21
状态 离线
|
『第 9 楼』:
使用 LLM 解释/回答一下
Originally posted by zjnbwdj at 10:30:
据我看大多是光盘超刻所致,现在好多光盘都标称可以刻录710M甚至更多的数据,但据我测试,刻录超过650M就有可能造成刻录的数据损坏或者不完整,但硬盘分区往往较大,所以完全可以容得下GHO文件,楼主可以看下自己刻盘时的数据大小.(PS:我曾刻录过好几张加入了大量常用软件的XP光盘,大小接近700M,结果是往硬盘刻窿时,ghost进度到99%就出现如楼主所说的提示,心痛不已啊.)
我刻的光盘数据大小是520M
Originally posted by zjnbwdj at 10:30:
In my opinion, most of them are caused by CD overburning. Now many CDs are labeled as capable of burning data of 710M or even more, but according to my test, burning data exceeding 650M may cause damaged or incomplete burned data. However, the hard disk partition is often large enough, so it can completely accommodate the GHO file. The owner can check the size of the data when burning the disc. (PS: I once burned several XP discs with a large number of commonly used software, and the size was close to 700M. As a result, when burning to the hard disk, the ghost progress reached 99% and the prompt as the owner said appeared, which made me heartbroken.)
The size of the data I burned on the disc is 520M
|
|
2007-2-10 09:42 |
|
|
booyer
新手上路

积分 5
发帖 2
注册 2006-11-22
状态 离线
|
『第 10 楼』:
使用 LLM 解释/回答一下
别信他们的。如果你运行光盘上的GHOST.EXE,然后手动指向硬盘上的GHO文件,看看,没有所谓的A:\GHOSTERR.TXT 了吧。想想,为什么一指向光盘上的GHO文件就会出现这个错误?解决办法只有一个,修改你的AUTOEXEC.BAT文件。但怎么修改,要看你的具体情况决定了。
Last edited by booyer on 2007-3-3 at 01:39 AM ]
Don't believe them. If you run GHOST.EXE on the CD-ROM and then manually point to the GHO file on the hard disk, see, there's no so-called A:\GHOSTERR.TXT anymore. Think about it, why does this error occur when you point to the GHO file on the CD-ROM? The only solution is to modify your AUTOEXEC.BAT file. But how to modify it depends on your specific situation.
Last edited by booyer on 2007-3-3 at 01:39 AM ]
|
|
2007-3-3 14:13 |
|
|
lianjiang2004
金牌会员
     
积分 3946
发帖 1884
注册 2006-1-20
状态 离线
|
『第 11 楼』:
使用 LLM 解释/回答一下
Originally posted by booyer at 2007-3-3 14:13:
别信他们的。如果你运行光盘上的GHOST.EXE,然后手动指向硬盘上的GHO文件,看看,没有所谓的A:\GHOSTERR.TXT 了吧。想想,为什么一指向光盘上的GHO文件就 ...
此言差矣。呵呵
Originally posted by booyer at 2007-3-3 14:13:
Don't believe them. If you run GHOST.EXE on the CD and manually point to the GHO file on the hard disk, you'll see that there's no A:\GHOSTERR.TXT anymore. Think about it, why does it ...
That's not right. Hehe
|

Windows 一键还原
http://www.yjhy.com |
|
2007-3-4 01:34 |
|