|
W
新手上路
积分 9
发帖 3
注册 2006-7-22
状态 离线
|
『楼 主』:
[求助]制作DOS启动盘时遇到的问题
使用 LLM 解释/回答一下
各位大虾好，小弟第一次接触DOS方面的内容，因此有很多不明白的地方。刚从新DOS时代的DOS软件里下了个MS-DOS 7.10标准启动盘，是323K那个，用WinRAR解压到软盘里，提示文件过大，无法继续。解压到本地硬盘，发现有1402K。我查了我的软盘属性，发现只有1.38M（我用的是那种常见的SONY盘）。我知道软盘的实际容量比标称的1.44M要小一点，但像我这样的正常吗？另外，在解压缩不成的情况下，我将那压缩包整个拖入软盘后从软驱启动，可是没成功。请问到底该如何制作这张DOS启动盘啊，望各位大虾予以指点。
Hello, everyone. I'm a newbie to DOS-related content, so I have many questions. Just now, I downloaded an MS-DOS 7.10 standard boot disk from the DOS software of the new DOS era, which is the 323K one. When I used WinRAR to extract it to a floppy disk, it prompted that the file is too large to continue. When I extracted it to the local hard disk, I found it's 1402K. I checked the properties of my floppy disk and found it's only 1.38M (I'm using that common SONY disk). I know that the actual capacity of a floppy disk is a bit smaller than the nominal 1.44M, but is what I'm encountering normal? Also, when the decompression didn't work, I dragged the entire compressed package into the floppy disk and then booted from the floppy drive, but it didn't succeed. Could you, dear大虾, please give me some pointers on how to make this DOS boot disk?
|
|
 2006-7-22 20:36 |
|
|
雨露
管理员
DOS非常爱好者
积分 6209
发帖 2598
注册 2006-1-20
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
想不到还有比我更菜的!<img src="images/smilies/face-smile-big.png" align="absmiddle" border="0">
朋友:你先将之解压到本地硬盘上,看是不是扩展名为IMG或IMA,然后放入一张软盘,接着用WinImage8.0打开它,,选择菜单"磁盘----格式化并写入磁盘"即可!
我刚才也去那个网站下了,发现更简单,解压到本地硬盘后,在该文件夹中只要双击MAKEBOOT.BAT就可以把它写入软盘!
直接将它复制到软盘肯定不行了,这样做没有启动功能呀!
Last edited by 雨露 on 2006-7-22 at 21:38 ]
I didn't expect there are people more noob than me! :D
Friend: You first extract it to the local hard disk and see if the extension is IMG or IMA, then put it into a floppy disk, then open it with WinImage8.0, and select the menu "Disk----Format and Write to Disk"!
I just went to that website to download it too, and found it simpler. After extracting to the local hard disk, just double-click MAKEBOOT.BAT in that folder to write it to the floppy disk!
Directly copying it to the floppy disk won't work. This way it doesn't have the boot function!
Last edited by 雨露 on 2006-7-22 at 21:38 ]
|
|
|
|
2006-7-22 21:30 |
|
|
W
新手上路
积分 9
发帖 3
注册 2006-7-22
状态 离线
|
『第 3 楼』:
使用 LLM 解释/回答一下
谢谢雨露的指点.不好意思,去了乡下半个月,到现在才来谢,请接受我这迟到的感谢.:D
引用"在该文件夹中只要双击MAKEBOOT.BAT就可以把它写入软盘!",我说明一下,那是要在DOS下才行的,windows下不行.关于进入DOS的办法,大家可以拿张空白软盘插入软驱后右键点击3.5软盘,选择格式化并勾选"创建一个MS-DOS启动盘"后开始格式化.完成后重启从软驱启动就可进入DOS.:P
Thanks for the guidance from Yulu. I'm sorry, I went to the countryside for half a month and just came to thank you now. Please accept my belated gratitude. :D
Quoted: "Just double-click MAKEBOOT.BAT in this folder to write it to the floppy disk!", let me explain, that is to be done under DOS, not under Windows. Regarding the way to enter DOS, everyone can insert a blank floppy disk into the floppy drive, then right-click the 3.5-inch floppy disk, select Format and check "Create an MS-DOS startup disk" and then start formatting. After completion, restart and boot from the floppy drive to enter DOS. :P
|
|
|
2006-8-8 22:49 |
|
|
lqhhxp
初级用户
积分 46
发帖 21
注册 2006-8-6
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
windows 下用
WinImage软件可将IMG文件COPY 到A:
Under Windows, you can use the WinImage software to copy the IMG file to A:
|
|
|
2006-8-9 16:37 |
|
|
mike56
新手上路
积分 15
发帖 8
注册 2009-5-11
状态 离线
|
|
|
2010-3-10 22:15 |
|
|
