|
fujianabc
金牌会员
     
积分 3467
发帖 1616
注册 2004-6-21
状态 离线
|
『楼 主』:
找到一个nt 3.51下访问fat32分区的驱动
使用 LLM 解释/回答一下
记得曾经这里讨论过如何用winnt 访问fat32,nt 4.0很简单,sysinternals有一个fat32 for nt4的驱动。至于nt 3.51,则没有下文。
今天无聊在网上搜到了一个nt 3.51的fat32驱动,放在这里给大家共享(里面还包含一个nt 4的fat32驱动)。
它是某高手对nt本身的fat驱动fastfat.sys进行了修改而得到的。
Last edited by fujianabc on 2007-12-11 at 02:13 PM ]
I remember that there was a discussion here before about how to use winnt to access FAT32. For NT 4.0, it's very simple, and Sysinternals has a FAT32 driver for NT4. As for NT 3.51, there was no follow-up.
Today, I was bored and found a FAT32 driver for NT 3.51 online, and I'm sharing it here for everyone (it also contains a FAT32 driver for NT 4).
It was modified by a master from the original FAT driver fastfat.sys of NT itself.
Last edited by fujianabc on 2007-12-11 at 02:13 PM ]
|
|
2006-4-21 17:18 |
|
|
Wengier
系统支持
             “新DOS时代”站长
积分 27736
发帖 10521
注册 2002-10-9
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
我以前曾经也在网上找到一个修改过的FASTFAT.SYS,说是可以让WnNT 3.51支持FAT32,但经测试后发现根本不行。不知道这个和那个是不是一样的(看文件目录十分相似),试过了吗?
I used to find a modified FASTFAT.SYS online, which was said to make WnNT 3.51 support FAT32, but after testing, it didn't work at all. I don't know if this one is the same as that one (the file directories look very similar). Have you tried it?
|

Wengier - 新DOS时代
欢迎大家来到我的“新DOS时代”网站,里面有各类DOS软件和资料,地址:
http://wendos.mycool.net/
E-Mail & MSN: wengierwu AT hotmail.com (最近比较忙,有事请联系DOSroot和雨露,谢谢!)
 |
|
2006-4-22 00:00 |
|
|
fujianabc
金牌会员
     
积分 3467
发帖 1616
注册 2004-6-21
状态 离线
|
『第 3 楼』:
使用 LLM 解释/回答一下
在中文版的winnt 3.51 sp5下试了一下,发觉没用。
Tried it under the Chinese version of WinNT 3.51 SP5, but it didn't work.
|
|
2006-4-22 12:49 |
|
|
Wengier
系统支持
             “新DOS时代”站长
积分 27736
发帖 10521
注册 2002-10-9
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
不过在中文版的WinNT 3.51下用Firefox 1.5x上网的效果倒是不错,看中文也没有问题,包括本论坛。
But the effect of surfing the Internet with Firefox 1.5x under the Chinese version of WinNT 3.51 is quite good, and there is no problem in viewing Chinese characters, including this forum.
|

Wengier - 新DOS时代
欢迎大家来到我的“新DOS时代”网站,里面有各类DOS软件和资料,地址:
http://wendos.mycool.net/
E-Mail & MSN: wengierwu AT hotmail.com (最近比较忙,有事请联系DOSroot和雨露,谢谢!)
 |
|
2006-4-23 00:41 |
|
|
yksoft1
高级用户
   
积分 823
发帖 395
注册 2006-1-28
状态 离线
|
|
2006-4-23 00:48 |
|
|
Wengier
系统支持
             “新DOS时代”站长
积分 27736
发帖 10521
注册 2002-10-9
状态 离线
|
|
2006-4-23 01:30 |
|
|
yksoft1
高级用户
   
积分 823
发帖 395
注册 2006-1-28
状态 离线
|
『第 7 楼』:
使用 LLM 解释/回答一下
好像0.6、1.0、1.04都不能运行。
但是1.5时可以运行的
It seems that versions 0.6, 1.0, and 1.04 cannot run. But version 1.5 can run.
|
|
2006-4-23 10:58 |
|
|
fujianabc
金牌会员
     
积分 3467
发帖 1616
注册 2004-6-21
状态 离线
|
『第 8 楼』:
使用 LLM 解释/回答一下
话题怎么转成firefox了?
要在nt 3.51中访问fat32,利用一些其他工具到是可以的,但这样就是无法挂载成盘符,比如winimage的较早版本(新版本在nt 3.51中无法运行)就可以访问fat32分区。
Why did the topic switch to Firefox?
To access FAT32 in NT 3.51, some other tools can be used, but it's impossible to mount it as a drive letter. For example, earlier versions of WinImage (newer versions don't run in NT 3.51) can access FAT32 partitions.
|
|
2006-4-23 19:15 |
|
|
雨露
管理员
          DOS非常爱好者
积分 6209
发帖 2598
注册 2006-1-20
状态 离线
|
『第 9 楼』:
使用 LLM 解释/回答一下
 嘿嘿,是4楼的站长先跑的题! 
:PHehe, it's the webmaster on the 4th floor who got off track first! ; )
|

|
|
2006-4-23 22:10 |
|
|
Wengier
系统支持
             “新DOS时代”站长
积分 27736
发帖 10521
注册 2002-10-9
状态 离线
|
『第 10 楼』:
使用 LLM 解释/回答一下
Originally posted by fujianabc at 2006-4-23 07:15 PM:
话题怎么转成firefox了?
要在nt 3.51中访问fat32,利用一些其他工具到是可以的,但这样就是无法挂载成盘符,比如winimage的较早版本(新版本在nt 3.51中无法运行)就可以访问fat32分区。
回到正题<img src="images/smilies/face-raspberry.png" align="absmiddle" border="0">,今天又试了一下,发现NT 3.51下加载更新的FAT驱动后真的可以访问FAT32分区,不过前提是需要在注册表中加上相应的驱动器定义,例如:
键: F:
字符串值: \Device\Harddisk0\Partition2 (即第1个硬盘的第2个分区)
位置:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\DOS Devices
这样就可以用F盘来访问这个FAT32分区了,而且中英文长文件名均支持。
Originally posted by fujianabc at 2006-4-23 07:15 PM:
Why did the topic shift to Firefox?
It is possible to access FAT32 in NT 3.51 using some other tools, but then it cannot be mounted as a drive letter. For example, earlier versions of WinImage (newer versions don't run on NT 3.51) can access FAT32 partitions.
Back to the topic:P, I tried again today and found that after loading a newer FAT driver under NT 3.51, it is really possible to access the FAT32 partition. However, the premise is that the corresponding drive definition needs to be added in the registry, for example:
Key: F:
String value: \Device\Harddisk0\Partition2 (that is, the second partition of the first hard disk)
Location: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\DOS Devices
In this way, the F drive can be used to access this FAT32 partition, and both Chinese and English long file names are supported.
|

Wengier - 新DOS时代
欢迎大家来到我的“新DOS时代”网站,里面有各类DOS软件和资料,地址:
http://wendos.mycool.net/
E-Mail & MSN: wengierwu AT hotmail.com (最近比较忙,有事请联系DOSroot和雨露,谢谢!)
 |
|
2008-1-27 08:14 |
|
|
fujianabc
金牌会员
     
积分 3467
发帖 1616
注册 2004-6-21
状态 离线
|
『第 11 楼』:
使用 LLM 解释/回答一下
Originally posted by Wengier at 2008-1-27 08:14 AM:
回到正题:P,今天又试了一下,发现NT 3.51下加载更新的FAT驱动后真的可以访问FAT32分区,不过前提是需要在注册表中加上相应的驱动器定义,例如: ...
站长强,现在还在研究这个。楼顶的那个驱动前一阶段已经被我删掉了,腾出空间上传了其他附件。
Originally posted by Wengier at 2008-1-27 08:14 AM:
Back to the topic: P, I tried it again today and found that after loading the updated FAT driver under NT 3.51, you can really access the FAT32 partition, but the premise is that you need to add the corresponding drive definition in the registry, for example: ...
The webmaster is strong, still researching this now. The previous driver on the top floor was deleted by me a while ago to make space to upload other attachments.
|
|
2008-1-27 12:03 |
|
|
fujianabc
金牌会员
     
积分 3467
发帖 1616
注册 2004-6-21
状态 离线
|
『第 12 楼』:
使用 LLM 解释/回答一下
顺便提一下,现在的vista sp1/2008中又引入了一个新的fat格式exFAT,支持大于4GB的单个文件。
我试了一下,这个文件系统的驱动exfat.sys,也可以在xp/2003下使用。
Last edited by fujianabc on 2008-1-27 at 12:45 PM ]
By the way, in the current Vista SP1/2008, a new FAT format called exFAT has been introduced, which supports single files larger than 4GB.
I tried it, and the driver for this file system, exfat.sys, can also be used under XP/2003.
Last edited by fujianabc on 2008-1-27 at 12:45 PM ]
|
|
2008-1-27 12:44 |
|
|
Wengier
系统支持
             “新DOS时代”站长
积分 27736
发帖 10521
注册 2002-10-9
状态 离线
|
『第 13 楼』:
使用 LLM 解释/回答一下
Originally posted by fujianabc at 2008-1-27 12:03 PM:
站长强,现在还在研究这个。楼顶的那个驱动前一阶段已经被我删掉了,腾出空间上传了其他附件。
其实也没有去“研究”这个啦,只是正好在网上看到相关资料,试试而已,结果果然成功了(这样NT 3.51下就可以看到整个硬盘了)。
Originally posted by fujianabc at 2008-1-27 12:03 PM:
The webmaster is strong, still researching this now. The driver on the top floor was deleted by me in the previous stage, freeing up space to upload other attachments.
Actually, I didn't really "research" this. It's just that I happened to see relevant information online, tried it, and it succeeded as expected (so that the entire hard disk can be seen under NT 3.51).
|

Wengier - 新DOS时代
欢迎大家来到我的“新DOS时代”网站,里面有各类DOS软件和资料,地址:
http://wendos.mycool.net/
E-Mail & MSN: wengierwu AT hotmail.com (最近比较忙,有事请联系DOSroot和雨露,谢谢!)
 |
|
2008-1-27 14:51 |
|
|
fujianabc
金牌会员
     
积分 3467
发帖 1616
注册 2004-6-21
状态 离线
|
『第 14 楼』:
使用 LLM 解释/回答一下
Originally posted by Wengier at 2008-1-27 02:51 PM:
其实也没有去“研究”这个啦,只是正好在网上看到相关资料,试试而已,结果果然成功了(这样NT 3.51下就可以看到整个硬盘了)。
现在还在用nt 3.51也够厉害的了
Originally posted by Wengier at 2008-1-27 02:51 PM:
Actually, I didn't really "study" this. I just happened to see relevant information online and tried it out. As a result, it was successful (so you can see the entire hard drive under NT 3.51).
It's quite impressive that you're still using NT 3.51 now
|
|
2008-1-27 18:14 |
|
|
Michael
钻石会员
       
积分 10046
发帖 3039
注册 2002-11-11
状态 离线
|
『第 15 楼』:
使用 LLM 解释/回答一下
Windows NT 3.51,真是个好系统,不过现在太过时了。
Windows NT 3.51 is really a good system, but it's too outdated now.
|

简单就是美 |
|
2008-1-27 18:22 |
|