|
awera
初级用户
积分 94
发帖 36
注册 2005-9-19
状态 离线
|
『楼 主』:
[求助]紧急！登录xp时老是自动注销返回登录窗口
使用 LLM 解释/回答一下
昨天用朋友电脑上网，第二次开机时登录administrator后老是不进入桌面，到安全模式选择了“系统还原”那一项，但是好像没有什么反应啊，于是重启，结果就是登录系统时马上就自动注销，又返回登录窗口，登录->注销->登录，如此循环！！！！
xp_sp2的系统，我好像也没改什么东西啊，晕死。
以前win2000的系统也出过类似故障，但是后来我自己修好了，可能因为多次调整分区后造成混乱以致win2000系统认不出系统盘时哪一个造成的吧，后来用diskgen重建mbr及分区表，又不知怎的，好了。
但是这个机子我并没有改分区表啊，而且好不容易用了u盘启动盘进去看了一下，只有一个主分区和两个扩展分区啊，试了一下上述方法，但是无效。
你们有没有遇到类似情况的啊？
盼望得到高手的解答！！！
谢谢！！！！
（我守在这里等待你的回复）
I used a friend's computer to go online yesterday. When I logged in as administrator for the second time after booting, it always didn't enter the desktop. I selected the "System Restore" option in safe mode, but it seemed to have no response. So I restarted, and the result was that when logging in to the system, it automatically logged out immediately, and returned to the login window. It was a cycle of logging in -> logging out -> logging in!!!
It's an XP_sp2 system, and I don't seem to have changed anything. Oh my god.
There was a similar problem with the previous Win2000 system, but later I fixed it myself. Maybe it was caused by confusion after multiple adjustments to partitions, so that the Win2000 system couldn't recognize which one was the system disk. Later, I used DiskGen to rebuild the MBR and partition table, and somehow it was fine.
But I didn't change the partition table on this computer, and I finally used the USB boot disk to enter and saw that there was only one primary partition and two extended partitions. I tried the above method, but it was ineffective.
Have you encountered a similar situation?
Looking forward to the solution from the experts!!!
Thank you!!!!
(I'm waiting here for your reply)
|
|
 2006-2-3 10:00 |
|
|
awera
初级用户
积分 94
发帖 36
注册 2005-9-19
状态 离线
|
|
|
2006-2-3 10:50 |
|
|
JonePeng
金牌会员
Ｄ◎＄ Ｆαп
积分 4562
发帖 1883
注册 2004-1-19
来自 广东广州
状态 离线
|
『第 3 楼』:
使用 LLM 解释/回答一下
Please provide the content of the reply in the post so that I can translate it.
|
－－－－＝＝＝＝≡≡≡≡ 我的至爱，永远是MSDOS！≡≡≡≡＝＝＝＝－－－－
 |
|
|
2006-2-3 12:41 |
|
|
areyong
中级用户
积分 211
发帖 39
注册 2003-6-25
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
也有可能与
C:\Documents and Settings\ 这个目录有关(比如说目录损坏,权限损坏等) 或者是这个目录下的其它几个目录,如Administrator,ALL USER等几个目录有关。
可以这样试下:
用XPE光盘启动,或者把硬盘挂到别的2K/XP系统下,或者用DOS4NTFS,
反正是能查到C盘,把C:\Documents and Settings\下的"Administrator"这个目录改名（或者其它几个目录改名）试试。
It is also possible to be related to the directory C:\Documents and Settings\ (for example, directory corruption, permission corruption, etc.) or other directories under this directory, such as Administrator, ALL USER and several other directories.
You can try this way:
Boot with an XPE CD, or hang the hard disk to another 2K/XP system, or use DOS4NTFS,
Anyway, as long as you can access the C drive, try renaming the "Administrator" directory under C:\Documents and Settings\ (or rename several other directories).
|
|
|
2006-2-3 14:38 |
|
|
willsort
元老会员
Batchinger
积分 4432
发帖 1512
注册 2002-10-18
状态 离线
|
『第 5 楼』:
使用 LLM 解释/回答一下
───────────────── 版务记录 ─────────────────
执行：Will Sort
操作：移动主题：自《DOS疑難解答 & 問題討論 （解答室）》
说明：依照主题内容分类，更适合于发表在此版区
提示：原版区转向链接三日后将删除
───────────────── 版务记录 ─────────────────
───────────────── Moderation Record ─────────────────
Performed by: Will Sort
Operation: Move Topic: From "DOS Doubts & Discussions (Q&A Room)"
Explanation: Classified according to the topic content, more suitable for posting in this board area
Note: The original board transfer link will be deleted after three days
───────────────── Moderation Record ─────────────────
|
※ Batchinger 致 Bat Fans：请访问 批处理编程的异类 ，欢迎交流与共享批处理编程心得！ |
|
|
2006-2-3 18:40 |
|
|
awera
初级用户
积分 94
发帖 36
注册 2005-9-19
状态 离线
|
|
|
2006-2-13 12:19 |
|
|
htysm
高级用户
积分 866
发帖 415
注册 2005-12-4
状态 离线
|
『第 7 楼』:
使用 LLM 解释/回答一下
"只有一个主分区和两个扩展分区啊"
怎么会有两个扩展分区呀。
"Only one primary partition and two extended partitions?
Why are there two extended partitions?"
|
|
|
2006-2-13 15:07 |
|
|
electronixtar
铂金会员
积分 7493
发帖 2672
注册 2005-9-2
状态 离线
|
|
|
2006-2-13 21:39 |
|
|
ko20010214
版主
积分 7294
发帖 1628
注册 2002-10-16
状态 离线
|
『第 9 楼』:
使用 LLM 解释/回答一下
以前碰到过这种情况，具体是怎么引起的不记得了，
好像是我乱删注册表引起的还是优化时引起的。
后来还好有光驱，有深山红叶的PE盘，用它引导到WINPE里再对本地硬盘的系统的注册表进行还原操作，（因为当时删了某一条注册表信息就引起这个现象，所以知道如何还原，现在隔太久了，不记得了），就恢复正常了。
I encountered this situation before, and I can't remember exactly what caused it.
It seems that it was caused by me randomly deleting the registry or during optimization.
Later, fortunately, I had a CD drive and a Shenshan Hongye PE disk. I used it to boot into WINPE and then performed a restore operation on the registry of the local hard disk system. (Because I deleted a certain registry information at that time, which caused this phenomenon, so I knew how to restore it. Now it has been too long, and I can't remember.) Then it returned to normal.
|
ko20010214
=================================
大功告成，打个Kiss!
ko20010214@MSN.com
神州优雅Q300C
Intel CeleronM 370处理器 | 256MbDDR内存
40G硬盘 | USB2.0 | IEEE 1394
13.3 ' WXGA 宽屏(16:10) | COMBO光驱
10/100M网卡 | 四合一读卡器
|
|
|
2006-2-19 20:09 |
|
