config.sys出错,请各位帮看一下拜托大家拉 - 中国DOS联盟论坛

这是我写的启动盘可是在虚拟机中启动出了好多错
我是刚学dos ,好多都弄不清楚,麻烦大家给看一下


@ECHO OFF
set EXPAND=YES
SET DIRCMD=/O:N



xmsdsk 4096 /y 
PAUSe
findramd 
path=%RAMDRIVE%\;a:\
path
copy command.com %RAMDRIVE%\ > NUL
set comspec=%RAMDRIVE%\command.com
copy extract.exe %RAMDRIVE%\ > NUL
%RAMDRIVE%\
extract /y /e /l %RAMDRIVE% a:\tools.cab > NUL

set temp=c:\
set tmp=c:\
cls
if "%config%"=="m1" GOTO m1cd
if "%config%"=="m2" goto m2usb
if "%config%"=="m3" goto m3ntfs
if "%config%"=="m4" goto QUIT
if "%config%"=="m5" goto m5chs

:m1cd
LH SHSUCDX /D:?IDE-CD /D:?USB-CD > nul
findcd >nul
goto common

:m2usb
goto common

:m3ntfs
NTFS4DOS.EXE
goto common

:m5chs
call chs.bat
goto common

:common
LH %RAMDRIVE%\DOSKEY
LH %RAMDRIVE%\CTMOUSE
SMARTDRV.EXE
puse
FINDRAMD.EXE
FINDCD.EXE
::=======================================
::=     Your Ramdrive is %RAMDRIVE%     =
::=     your CD-ROM is %CDROM%          =
::=                                     =
::=======================================
ECHO.
ECHO.
::  if you have a graphics FileManager please
::  input "vc.bat" ,and then Enter

:QUIT



menuitem=m1, Start DOS with CD-ROM support (emm386 mode).
menuitem=m2, Start DOS with CD-ROM and USB drivers (emm386 mode)
menuitem=m3, Start DOS with CD-ROM and ntfs drivers (emm386 mode)
menuitem=m4, Start DOS ( No any drivers )
menuitem=m5, View this DOS Readle file ( with chinses)
menudefault=CD,30
menucolor=7,0


device=a:\drivers\himem.sys /testmemff
DEVICE=a:\drivers\EMM386.EXE NOEMS X=D000
DEVICEHIGH=a:\drivers\UDMA.SYS
INCLUDE CD


device=a:\drivers\himem.sys /testmemff
DEVICE=a:\drivers\EMM386.EXE NOEMS X=D000
DEVICEHIGH=a:\drivers\UDMA.SYS
INCLUDE USB


device=a:\drivers\himem.sys /testmemff
DEVICE=a:\drivers\EMM386.EXE NOEMS X=D000
DEVICEHIGH=a:\drivers\UDMA.SYS




device=a:\drivers\himem.sys /testmemff
DEVICE=a:\drivers\EMM386.EXE NOEMS X=D000
DEVICEHIGH=a:\drivers\UDMA.SYS


DEVICE=a:\drivers\DUSE.EXE INT EMU CDW=3 DDW=3 XFER=32 DRIVES=2 CDD=USB-CD OBAR=0xD000
DEVICE=a:\drivers\USBASPI.SYS /R
DEVICEHIGH=a:\drivers\DI1000DD.SYS
DEVICEHIGH=a:\drivers\USBCD.SYS /D:USB-CD
DEVICE=a:\drivers\ASPIOHCI.SYS /INT /ALL
DEVICE=a:\drivers\ASPIUHCI.SYS /INT /ALL


DEVICEHIGH=a:\drivers\VIDE-CDD.SYS /D:IDE-CD
:EVICEHIGH=a:\drivers\ASPICD.SYS /D:SCSI-CD
:EVICEHIGH=a:\drivers\CLOAKING.EXE



SET TMP=C:\
SET TEMP=C:\
DOS=HIGH,UMB,AUTO
NUMLOCK=OFF
FCBSHIGH=4,0
FILESHIGH=30
BUFFERSHIGH=30,0
LASTDRIVEHIGH=32
STACKSHIGH=9,256

[ Last edited by allpurpose on 2006-1-6 at 18:28 ]

第1楼　allpurpose	发表于 2006-01-06 16:32
新手上路　发帖 3　积分 10
config.sys出错,请各位帮看一下拜托大家拉这是我写的启动盘可是在虚拟机中启动出了好多错我是刚学dos ,好多都弄不清楚,麻烦大家给看一下 @ECHO OFF set EXPAND=YES SET DIRCMD=/O:N xmsdsk 4096 /y PAUSe findramd path=%RAMDRIVE%\;a:\ path copy command.com %RAMDRIVE%\ > NUL set comspec=%RAMDRIVE%\command.com copy extract.exe %RAMDRIVE%\ > NUL %RAMDRIVE%\ extract /y /e /l %RAMDRIVE% a:\tools.cab > NUL set temp=c:\ set tmp=c:\ cls if "%config%"=="m1" GOTO m1cd if "%config%"=="m2" goto m2usb if "%config%"=="m3" goto m3ntfs if "%config%"=="m4" goto QUIT if "%config%"=="m5" goto m5chs :m1cd LH SHSUCDX /D:?IDE-CD /D:?USB-CD > nul findcd >nul goto common :m2usb goto common :m3ntfs NTFS4DOS.EXE goto common :m5chs call chs.bat goto common :common LH %RAMDRIVE%\DOSKEY LH %RAMDRIVE%\CTMOUSE SMARTDRV.EXE puse FINDRAMD.EXE FINDCD.EXE ::======================================= ::= Your Ramdrive is %RAMDRIVE% = ::= your CD-ROM is %CDROM% = ::= = ::======================================= ECHO. ECHO. :: if you have a graphics FileManager please :: input "vc.bat" ,and then Enter :QUIT menuitem=m1, Start DOS with CD-ROM support (emm386 mode). menuitem=m2, Start DOS with CD-ROM and USB drivers (emm386 mode) menuitem=m3, Start DOS with CD-ROM and ntfs drivers (emm386 mode) menuitem=m4, Start DOS ( No any drivers ) menuitem=m5, View this DOS Readle file ( with chinses) menudefault=CD,30 menucolor=7,0 device=a:\drivers\himem.sys /testmemff DEVICE=a:\drivers\EMM386.EXE NOEMS X=D000 DEVICEHIGH=a:\drivers\UDMA.SYS INCLUDE CD device=a:\drivers\himem.sys /testmemff DEVICE=a:\drivers\EMM386.EXE NOEMS X=D000 DEVICEHIGH=a:\drivers\UDMA.SYS INCLUDE USB device=a:\drivers\himem.sys /testmemff DEVICE=a:\drivers\EMM386.EXE NOEMS X=D000 DEVICEHIGH=a:\drivers\UDMA.SYS device=a:\drivers\himem.sys /testmemff DEVICE=a:\drivers\EMM386.EXE NOEMS X=D000 DEVICEHIGH=a:\drivers\UDMA.SYS DEVICE=a:\drivers\DUSE.EXE INT EMU CDW=3 DDW=3 XFER=32 DRIVES=2 CDD=USB-CD OBAR=0xD000 DEVICE=a:\drivers\USBASPI.SYS /R DEVICEHIGH=a:\drivers\DI1000DD.SYS DEVICEHIGH=a:\drivers\USBCD.SYS /D:USB-CD DEVICE=a:\drivers\ASPIOHCI.SYS /INT /ALL DEVICE=a:\drivers\ASPIUHCI.SYS /INT /ALL DEVICEHIGH=a:\drivers\VIDE-CDD.SYS /D:IDE-CD :EVICEHIGH=a:\drivers\ASPICD.SYS /D:SCSI-CD :EVICEHIGH=a:\drivers\CLOAKING.EXE SET TMP=C:\ SET TEMP=C:\ DOS=HIGH,UMB,AUTO NUMLOCK=OFF FCBSHIGH=4,0 FILESHIGH=30 BUFFERSHIGH=30,0 LASTDRIVEHIGH=32 STACKSHIGH=9,256 [ Last edited by allpurpose on 2006-1-6 at 18:28 ] 附件 s.jpg.gif (2.88 KiB)

第2楼　220110	发表于 2006-01-06 17:58
荣誉版主　发帖 313　积分 718
第五行：PAUSe是什么东西？

第3楼　allpurpose	发表于 2006-01-06 18:04
新手上路　发帖 3　积分 10
PAUSe 那是暂停命令,因为出错了,且有看不到出错的提示.我把它暂停下来,看看能否载入内存盘

第4楼　allpurpose	发表于 2006-01-06 18:26
新手上路　发帖 3　积分 10
呵呵，原来是那查找内存盘的的程序有问题,重换了一个,现在搞定了,不过在载入ntfs分区出了点问题,我是用ntfs4dos.但不能载入ntfs