批处理诊断专室 - 中国DOS联盟论坛 - 中国DOS联盟之联合DOS论坛

@ECHO OFF
KPUSH 27 27
KPUSH>NUL
TM /R=30 /D=250
LH KILLER
LH DOSKEY
LH CTMOUSE
LH CTMOUSE>NUL
IF NOT %CONFIG%#==M5# GOTO BOOT
ECHO.
ECHO Now preparing to open README with Chinese support...
XMSDSK 80 /Y>NUL
FINDRAMD>NUL
IF %RAMDRIVE%#==# ECHO Can't create RAM disk!
IF %RAMDRIVE%#==# GOTO SHUT
EXTRACT /E /L %RAMDRIVE%\ DOSET.CAB EDIT.COM>NUL
XZL
%RAMDRIVE%\EDIT README.TXT
XZL /Q
:SHUT
ECHO Now trying to shutdown the computer..
ECHO.
SHUTDOWN S
ECHO.
ECHO Shutdown failed. Now restart the computer..
ECHO.
SHUTDOWN R
GOTO END
:BOOT
DREADY C:
IF ERRORLEVEL 1 ECHO Warning: Can't find any valid hard drives!
IF ERRORLEVEL 1 GOTO NOCACHE
ECHO Y|LOCK C:>NUL
ECHO.
ECHO Preparing to load the hard disk cache(PC-CACHE), press any key to cancel..
WAIT 2
IF ERRORLEVEL 1 ECHO Cancelled.
IF NOT ERRORLEVEL 1 LH PCCACHE /SIZEXT:4096 /WRITE:OFF /WIN /MINI
:NOCACHE
ECHO.
LH MSCDEX /D:IDE-CD /D:SCSI-CD /D:USB-CD /S /K
XMSDSK 4096 /Y
ECHO Setting up the RAM disk...
FINDRAMD>NUL
IF %RAMDRIVE%#==# GOTO NORAM
IF NOT EXIST %RAMDRIVE%\SYSTEM\NUL MD %RAMDRIVE%\SYSTEM
COPY COMMAND.COM %RAMDRIVE%\SYSTEM>NUL
EXTRACT /E /L %RAMDRIVE%\SYSTEM DOSET.CAB>NUL
EXTRACT /E /L %RAMDRIVE%\SYSTEM VC.CAB>NUL
ECHO The necessary tools have been successfully loaded to drive %RAMDRIVE%.
MD %RAMDRIVE%\TEMP
SET COMSPEC=%RAMDRIVE%\SYSTEM\COMMAND.COM
SET TMP=%RAMDRIVE%\TEMP
SET TEMP=%RAMDRIVE%\TEMP
PATH=%RAMDRIVE%.;%RAMDRIVE%\SYSTEM
GOTO NEXT
:NORAM
ECHO Warning: Can't create RAM disk!
SET COMSPEC=A:\COMMAND.COM
:NEXT
SET DIRCMD=/OGN /4
SET PROMPT=$P$G
PATH=%PATH%;C:.;A:.;..
LH SHARE
LH ZENO /Q
LH MOUSCLIP /M
LH DOSLFN /C- /Z:CP936UNI.TBL
IF %CONFIG%#==M3# NTFSDOS /U
LH ESCAPE
FINDCD /Q
CLS
WRITEXT 1 1 -f15 Note:
ECHO.
IF NOT %CDROM%#==# ECHO For accessing CD/DVD drive, use the drive letter %CDROM%(1st).
IF NOT %RAMDRIVE%#==# ECHO For accessing RAM drive, use the drive letter %RAMDRIVE%.
IF NOT %CONFIG%#==M3# ECHO For accessing NTFS drives(if any), type NTFSDOS at the command line.
ECHO At any time, you can press F12 key to return to DOS, or use the mouse.
BREAK ON
LFNFOR ON
IF %RAMDRIVE%#==# GOTO END
ECHO.
ECHO Press ENTER in 2 seconds if you want to start Volkov Commander..
WAIT 2
SET VC=
IF ERRORLEVEL 13 IF NOT ERRORLEVEL 14 SET VC=1
IF %VC%#==# ECHO Skipped.
ECHO.
ECHO Now you're in MS-DOS 7.10 prompt.
ECHO.
ECHO For more information, please look at README.TXT(in Chinese).
ECHO To start Chinese system for Chinese, type XZL at the command line.
WRITEXT 0+ 1 "Any comments, please come to the forum at: " -f15 http://dosbbs.2ya.com/ -f7
ECHO.
IF %VC%#==# GOTO END
SET VC=
ECHO.
ECHO Starting Volkov Commander...
ECHO.
LH VC
:END
ECHO.

第76楼　csmhsc	发表于 2003-06-08 00:00
初级用户　发帖 4　积分 120
55 小弟弟我看不懂

第77楼　我爱DOS	发表于 2003-06-09 00:00
初级用户　发帖 52　积分 317
bat不是拿来写程序的啊，怎能写病毒呢

第78楼　dreamgoon	发表于 2003-06-09 00:00
初级用户　发帖 3　积分 116
各位高手们，我是一位刚接触dos的新手啊！我很想学好它，但却不知从何下手，希望各位能给我点见议，指点一下我。谢谢了！！

第79楼　我爱DOS	发表于 2003-06-10 00:00
初级用户　发帖 52　积分 317
先找一些这方面的资料看看命令的用法，有什么不明的在来提问，

第80楼　如是大师	发表于 2003-06-10 00:00
元老会员　发帖 3,351　积分 9,654　来自湖北
恶性的bat文件也不下于病毒了。

第81楼　amingshao	发表于 2003-06-11 00:00
初级用户　发帖 7　积分 131
请问怎样用bat备份文件要用批处理要怎样编辑呢。。

第82楼　anson	发表于 2003-06-14 00:00
初级用户　发帖 66　积分 321
有关AUTOEXEC.BAT的问题~~~! 想问一下在AUTOEXEC.BAT里面如何设置和定义光驱盘符?如何指定读取光驱~~~?

第83楼　如是大师	发表于 2003-06-15 00:00
元老会员　发帖 3,351　积分 9,654　来自湖北
用set命令指定变量

第84楼　anson	发表于 2003-06-15 00:00
初级用户　发帖 66　积分 321
例如呢?怎样用才可以设置光盘?

第85楼　anson	发表于 2003-06-15 00:00
初级用户　发帖 66　积分 321
@ECHO OFF KPUSH 27 27 KPUSH>NUL TM /R=30 /D=250 LH KILLER LH DOSKEY LH CTMOUSE LH CTMOUSE>NUL IF NOT %CONFIG%#==M5# GOTO BOOT ECHO. ECHO Now preparing to open README with Chinese support... XMSDSK 80 /Y>NUL FINDRAMD>NUL IF %RAMDRIVE%#==# ECHO Can't create RAM disk! IF %RAMDRIVE%#==# GOTO SHUT EXTRACT /E /L %RAMDRIVE%\ DOSET.CAB EDIT.COM>NUL XZL %RAMDRIVE%\EDIT README.TXT XZL /Q :SHUT ECHO Now trying to shutdown the computer.. ECHO. SHUTDOWN S ECHO. ECHO Shutdown failed. Now restart the computer.. ECHO. SHUTDOWN R GOTO END :BOOT DREADY C: IF ERRORLEVEL 1 ECHO Warning: Can't find any valid hard drives! IF ERRORLEVEL 1 GOTO NOCACHE ECHO Y\|LOCK C:>NUL ECHO. ECHO Preparing to load the hard disk cache(PC-CACHE), press any key to cancel.. WAIT 2 IF ERRORLEVEL 1 ECHO Cancelled. IF NOT ERRORLEVEL 1 LH PCCACHE /SIZEXT:4096 /WRITE:OFF /WIN /MINI :NOCACHE ECHO. LH MSCDEX /D:IDE-CD /D:SCSI-CD /D:USB-CD /S /K XMSDSK 4096 /Y ECHO Setting up the RAM disk... FINDRAMD>NUL IF %RAMDRIVE%#==# GOTO NORAM IF NOT EXIST %RAMDRIVE%\SYSTEM\NUL MD %RAMDRIVE%\SYSTEM COPY COMMAND.COM %RAMDRIVE%\SYSTEM>NUL EXTRACT /E /L %RAMDRIVE%\SYSTEM DOSET.CAB>NUL EXTRACT /E /L %RAMDRIVE%\SYSTEM VC.CAB>NUL ECHO The necessary tools have been successfully loaded to drive %RAMDRIVE%. MD %RAMDRIVE%\TEMP SET COMSPEC=%RAMDRIVE%\SYSTEM\COMMAND.COM SET TMP=%RAMDRIVE%\TEMP SET TEMP=%RAMDRIVE%\TEMP PATH=%RAMDRIVE%.;%RAMDRIVE%\SYSTEM GOTO NEXT :NORAM ECHO Warning: Can't create RAM disk! SET COMSPEC=A:\COMMAND.COM :NEXT SET DIRCMD=/OGN /4 SET PROMPT=$P$G PATH=%PATH%;C:.;A:.;.. LH SHARE LH ZENO /Q LH MOUSCLIP /M LH DOSLFN /C- /Z:CP936UNI.TBL IF %CONFIG%#==M3# NTFSDOS /U LH ESCAPE FINDCD /Q CLS WRITEXT 1 1 -f15 Note: ECHO. IF NOT %CDROM%#==# ECHO For accessing CD/DVD drive, use the drive letter %CDROM%(1st). IF NOT %RAMDRIVE%#==# ECHO For accessing RAM drive, use the drive letter %RAMDRIVE%. IF NOT %CONFIG%#==M3# ECHO For accessing NTFS drives(if any), type NTFSDOS at the command line. ECHO At any time, you can press F12 key to return to DOS, or use the mouse. BREAK ON LFNFOR ON IF %RAMDRIVE%#==# GOTO END ECHO. ECHO Press ENTER in 2 seconds if you want to start Volkov Commander.. WAIT 2 SET VC= IF ERRORLEVEL 13 IF NOT ERRORLEVEL 14 SET VC=1 IF %VC%#==# ECHO Skipped. ECHO. ECHO Now you're in MS-DOS 7.10 prompt. ECHO. ECHO For more information, please look at README.TXT(in Chinese). ECHO To start Chinese system for Chinese, type XZL at the command line. WRITEXT 0+ 1 "Any comments, please come to the forum at: " -f15 http://dosbbs.2ya.com/ -f7 ECHO. IF %VC%#==# GOTO END SET VC= ECHO. ECHO Starting Volkov Commander... ECHO. LH VC :END ECHO.

第86楼　如是大师	发表于 2003-06-15 00:00
元老会员　发帖 3,351　积分 9,654　来自湖北
SET DIRCMD=/OGN /4后加进 set cdrom=你设定的盘符 LH MSCDEX /D:MSCD001 /L:%CDROM%

第87楼　anson	发表于 2003-06-15 00:00
初级用户　发帖 66　积分 321
SET DIRCMD=/OGN /4后加进这句是什么意思?

第88楼　如是大师	发表于 2003-06-15 00:00
元老会员　发帖 3,351　积分 9,654　来自湖北
哦，这个你没有，就不必管他了。。

第89楼　oyster	发表于 2003-06-16 00:00
初级用户　发帖 7　积分 140
cd % window% 是什么意思啊？

第90楼　如是大师	发表于 2003-06-16 00:00
元老会员　发帖 3,351　积分 9,654　来自湖北
进入所设定的%windows%这个变量。