HD-COPY 最新版本 - 中国DOS联盟论坛 - 中国DOS联盟之联合DOS论坛

-----------------------------------------------------------------------------

H D - C O P Y 2 . 5 E
___________________________
~^~^~^~^~^~^~^~^~^~^~^~^~^~

Copyright (c) 1992-96 by Oliver Fromme -- All Rights Reserved
Oliver Fromme, Klingestr. 2, 38640 Goslar, Germany
Internet email: fromme@rz.tu-clausthal.de

This Program is CARDWARE. You may copy it, use it, and give it to your
friends under the following conditions:

* Don't charge any money for it.
* Only distribute the complete package, without any files missing.
* Don't modify the files in any way.
* If you use this program or if you think that it's useful (or both...?),
please send a postcard (e. g. with a beautiful picture of your home
town), see my address above.
* If you include this program on a CD-ROM, please send me a free copy of
that CD-ROM.

Distribution of HD-COPY in any way is explicitely desired, provided that the
above conditions are met.

ATTENTION:
YOU ARE USING HD-COPY AT YOUR OWN RISK! THE AUTHOR (OLIVER FROMME) IS NOT
LIABLE FOR ANY DAMAGE CAUSED BY THE USE OF HD-COPY OR BY THE INABILITY
TO USE HD-COPY. IF YOU ARE NOT SURE ABOUT THIS, OR IF YOU DON'T ACCEPT
THIS, THEN DO NOT USE HD-COPY!

All product names mentioned in this manual and software are trademarks or
registered trademarks of their respective owners. They are used for
identification purposes only.

-----------------------------------------------------------------------------

What is HD-COPY?
~~~~~~~~~~~~~~~~

HD-COPY is the fastest copy-program I know (and I know many) --- there's
definitely no faster one. You can also use it to format disks at various
formats (from 720 Kb to 1.764 Mb in this version of HD-COPY), which is
faster than DOS' FORMAT and produces less errors.

Of course you can also use it with lower density disks (720 Kb or 360 Kb).
The following DD formats are supported:

* 320 Kb, 360 Kb, 720 Kb

* "special" DD formats: 400 Kb, 800 Kb, 820 Kb and similar

The following HD formats are supported:

* 5 1/4 inch drives: 1.2 Mb, 1.44 Mb, 1.48 Mb and similar

* 3 1/2 inch drives: 1.2 Mb, 1.44 Mb, 1.48 Mb, 1.72 Mb and similar

All these formats are compatible. For example, you can copy a 1.44Mb disk
from 3 1/2 to 5 1/4. There's one exception: you can't copy more than
1.48 Mb to a 5 1/4 inch disk (it's impossible for technical and physical
reasons). And, of course, you can't copy 1.2 Mb or more to a DD disk.

Typical operation times of HD-COPY (without FAT-selection, see below):

Format, Drive 1.2, 5? 1.2, 3? 1.44, 3? 1.44, 5? 1.72, 3?
-----------------------------------------------------------------------
Read/Write/Verify(1) 30 32 36 58 70
Read/Write/Verify(2) 27 32 32 58 70
Form.+Write 67 64 80 107 131
Form.+Write+Verify 94 96 112 160 196
Format 54 65 65 55 67
Format+Verify 68 65 81 109 133

(1) applies to disks formatted with DOS' FORMAT or any other program (such
as FDFORMAT).
(2) applies to disks formatted with HD-COPY. As you can see, these disks
are handled 3 to 4 seconds faster (at standard formats).

When you switch on FAT-selection, the durations depend on how full the
disk is:

Format, Drive 1.2, 5? 1.2, 3? 1.44, 3? 1.44, 5? 1.72, 3?
------------------------------------------------------------------------
Read/Write/Verify(1) 0-30 0-32 0-36 0-58 0-70
Read/Write/Verify(2) 0-27 0-32 0-32 0-58 0-70
Form.+Write 54-67 64 64-80 54-107 64-131
Form.+Write+Verify 54-94 64-96 64-112 54-160 64-196

For 1.48 Mb, look at the duration for 1.44 Mb and add 2.5%.

Note: To use non-standard disks (i.e. 5 1/4 disks with more than 1.2 Mb
or 3 1/2 disks with more than 1.44 Mb) outside HD-COPY, you have to install
a TSR program like FDREAD, because the DOS/BIOS doesn't like disks with an
unusual number of sectors. HD-COPY itself doesn't need FDREAD, since it has
its own routines to handle special formats.

FDREAD and FDFORMAT are Public Domain programs by Christoph H. Hochst則ter,
available on ftp-servers all over the world.

With kind permission of Christoph H. Hochst則ter, FDREAD is distributed
within the HD-Copy package. See FDREAD.DOC for instructions.

-----------------------------------------------------------------------------

What do I need?
~~~~~~~~~~~~~~~

* IBM-AT or 100% compatible clone (80286 minimum!)
* a mouse (Microsoft comp.) OR a keyboard (or both)
* at least one disk drive (DD or HD)
* a monochrome or colour adapter (Hercules, CGA, EGA, VGA)
* MS-DOS 3.2 or above

You needn't have the following, but it's recommended:

* two HD (high density) disk drives
* EGA or VGA color adapter
* a mouse (Microsoft compatible) AND a keyboard

What you MUST NOT have:

* Software cache programs (e. g. SmartDrive, HyperDisk).
If you have one, switch it off, at least for the floppy disk drives.
(The current version of HD-Copy seems to work with Smartdrive
(DOS 5.0/Windows 3.1) and HyperDisk, but that's not extensively tested.)
* Other memory resident programs (TSRs), which are accessing
your disk drives. Disable or unload them.

HD-COPY works fine with monochrome adapters (like Hercules or MDA), but
it doesn't look as good as with color adapters.

-----------------------------------------------------------------------------

Sorry folks, I've not translated the entire manual. If there's somebody
willing to do that, I'd very much appreciate it.

Don't worry, HD-COPY is very easy to use, so you probably won't need a manual
at all. There is an online help function: Use the cursor keys to select a
menu entry, then press the F1 key to get a help text about that topic.

If you are new to HD-COPY, then just start it by typing "HD-COPY" and read
the online help of the menu entries which seem important to you.

The remainder of this text file describes those things which are not covered
by the online help.

-----------------------------------------------------------------------------

General Usage

Basically, there are three ways to work with HD-COPY:
1. The easiest way: use your mouse.
Click on any main menu entry to perform the desired action.
Click on any option entry to change that option.
Click on the source window to read from the source disk.
Click on the destination window to write to a destination disk.
Click on the title line of the source/destination window to change
the source/destination drive (only if you have two drives).
Note: Disk read/write can only be interrupted by a key stroke,
not by a mouse click.
Click on "Format destination" (main menu) to enter the format
menu, then choose your favourite disk format.
2. Use the cursor keys to walk around, hit the return key to perform
the action which is highlighted.
3. Every action has a hot key (displayed in red). Experienced users
may use this, because it's faster than mouse moving and clicking.
Note that you must press the Shift key and the hot key simultaneously
to access the options.

Command Line Parameters

Type "HD-COPY /?" to get a help text about command line parameters.

Those parameters are evaluated in the following order:
1. Environment variable HD-COPYCMD
2. Configuration file HD-COPY.CFG (same directory as HD.COPY.EXE)
3. Command line parameters

HD-COPY.CFG may contain comments, preceded by ";", "%" ,or "#",
the remainder of the respective line is ignored.
If a parameter occurs more than once (e.g. "/I- /I+"), the last
one is valid (i.e. "/I+").

There's a "Save Configuration" function in the "Special" menu of HD-Copy,
which automatically creates a HD-COPY.CFG file containing the current
options.

Buffering

HD-COPY dynamically allocates memory to store the contents of disks (this
is refered to as HD-COPY's internal buffer). If possible, HD-COPY uses
XMS and/or EMS memory. If there is not enough such memory (or none at
all), HD-COPY creates temporary swap files.

First, it tries to create a swap file on a virtual RAM disk. The
appropriate drive and directory is taken from one of these environment
variables (in this order):
HDCTEMP
RAMDISK
RAM
If none of those variables are set, or if there is not enough free space,
HD-COPY uses a swap file in C:\.

Example: Assume you want to copy a disk which contains 1000 Kb, and there
is 200 Kb of XMS and EMS each, and a RAM disk of 500 Kb. Then HD-COPY
would allocate all of the XMS and EMS memory, create a 500 Kb swap file on
the RAM disk, and a 100 Kb swap file on your hard disk (C:\).

Compression of Image Files

With "Put to file" (main menu) you can save an image of a disk to your
hard disk (see the online help).

By default, the image file is slightly compressed, so you can usually save
it to another disk of the same format. But you should additionally
compress it with a "real" compress utility (e.g. ZIP or ARJ) if you are
going to archive lots of disk images.

When you specify the command line parameter "/I-" (may also be changed in
the configuration file), HD-COPY doesn't compress image files, but saves
them as "raw" files without header, which is compatible with some other
disk image utilities.

Note that the "/I" parameter does not affect the "Get from file" function,
since HD-COPY automatically recognizes if the image file is compressed or
not.

Formatting Disks

I strongly recommend that you switch "Auto verify" on. Otherwise HD-COPY
is not able to detect and correct any errors when formatting. (The same
applies when writing to the destination disk, too.) Besides, HD-COPY is
very fast, even if verification is switched on.

Note that track 0 is always verified (regardless of the verify switch),
since this track contains vital information (bootblock, FAT, root
directory).

If you format standard disks (max. 18 sectors at 3.5", 15 sectors at
5.25"), up to two bad sectors per track can be exchanged with "spare
sectors" (similar to hard disks).
In other words, you can format disks which contain bad blocks (or which
FORMAT just refuses to format because the bad block is on track 0) and
still get the full capacity (there are no bad blocks anymore)!
If such an exchange takes place, the corresponding track is verified
twice to ensure data safety.
If there are three or more bad blocks on a track (or if you use a
non-standard format), HD-Copy can't eliminate all bad blocks on that
track. Of course the remaining bad blocks are marked (in the FAT),
so they're not used for data storage.

This also works when writing to the destination disk. When HD-COPY
encounters an error while writing ("Auto verify" must be switched on!),
it tries to reformat the track and exchange the bad sectors.

Auto Verify

I have said this before, but just to make sure that you don't miss it:
If you're not ABSOLUTELY sure about the quality of your disks, turn
"Auto Verify" on! It's worth the additional seconds, believe me.

Password Protection

Use this feature carefully! If "Password" is switched on, it applies to
formatting, reading, writing AND verifying. To write (or read) a
protected disk, it must be formatted with the same password. A protected
disk can't be used with any other program (you get lots of errors).
The only way to use it is to read it with HD-COPY (with the correct
password, of course) and then write it to a normal disk WITHOUT
protection.
Note: The password is case sensitive ("Joe" and "JOE" are different
passwords). You have to enter it twice, the letters are not displayed
on the screen.

"Risky" Mode

(Refer to the online help for more information about the "Expert Mode".)

If the "risky" mode is switched on, HD-COPY scans the disk drives every
second. If there's a new disk in the source drive, it is immediately
read. If there's a new disk in the destination drive, it is immediately
written. So be careful!

If source and destination drive are the same, source and destination disks
are distinguished by the write-protection only. So protect your source
disks!

If you haven't used this mode before, you should try it first with some
unimportant disks, until you are sure that you know how it works.

This mode also works with the "Format" menu, which enables you to format
lots of disks in a short time.

Symbols

These symbols are used in the source and destination window:

R (green) : Read - the track was read successfully
V (green) : Verify - the track was written correctly
T (green) : Test - the track is formatted and (hmm...) can be read
C (green) : Corrected - an bad block was successfully exchanged
C (white) : Cleaning - used with the cleaning option
W (blue) : Write - the track was written
F (purple) : Format - the track was formatted
E (red) : Error - a read or write error occured
B (red) : Buffer error occured (transfer from/to buffer file)
M (red) : Mismatch - disk and buffer data are different
- (grey) : a free (empty) track (needs no further treatment)
?(grey) : a free (empty) track (not yet reached)
(grey) : an allocated track (not yet reached)

-----------------------------------------------------------------------------

That's all for this time. Hope you like it.

But if it doesn't work, please tell me exactly what happened, what
type of machine you used, which DOS and which TSRs you had installed
(a copy of your CONFIG.SYS and AUTOEXEC.BAT would be helpful) and
whatever you think it might be important. Thanks 8-)

If you want me to send you a disk with the latest version of HD-Copy,
send me DM 10 or US$ 10 cash (no other currencies, no stamps) to cover
my expenses.
If you have acces to Internet FTP, you can get the latest version from
ftp.tu-clausthal.de /pub/msdos/utils/dskutl
(there are other nice things, too), or use a WWW browser with this URL:
http://www.rz.tu-claustha.de/~inof/Welcome.html

Bye, So long, Ciao, Tschuess, Per aspera ad astra

Oliver

-----------------------------------------------------------------------------
Oliver Fromme, Klingestr. 2, 38640 Goslar, Germany
Internet/Usenet email: fromme@rz.tu-clausthal.de
WWW: http://www.rz.tu-claustha.de/~inof/Welcome.html
-----------------------------------------------------------------------------
"To boldly go where no man has gone before..." (Star Trek)
-----------------------------------------------------------------------------

第16楼　spitfirebay	发表于 2004-02-01 00:00
初级用户　发帖 14　积分 141
我不明白，讨论这个话题有什么意义？你们为什么老是这么忠情于DOS？有句话说得好：计算机始终只是工具，不是我们的信仰！！DOS，我在系统有问题时才用它，甚至现在在系统有问题是我也不用它了，只用在网上找到的Linux工具盘。不论什么工具，我们有用时就拿来用，没用就放在一边，这才是务实的态度吧？

第17楼　wphs0326	发表于 2004-04-10 00:00
银牌会员　发帖 509　积分 1,708　来自安徽淮南
不管是什么版的，只要是好用的就是最好的，您说呢？

第18楼　wphs0326	发表于 2004-04-10 00:00
银牌会员　发帖 509　积分 1,708　来自安徽淮南
我用的这个是3.0A，我看跟你的也差不多呀打开附件

第19楼　龙王	发表于 2004-04-11 00:00
银牌会员　发帖 334　积分 1,186
版本用过不老少 1.7的比较好转了一圈回来了修复磁道顶呱呱

第20楼　wxmok	发表于 2006-02-15 12:45
初级用户　发帖 14　积分 28
大家携手建造最好的 DOS 论坛

第21楼　myh159357	发表于 2007-02-27 04:33
新手上路　发帖 3　积分 6
找了很久，不知道是不是我要找的

第22楼　Kinglion	发表于 2007-02-27 07:23
铂金会员　发帖 1,924　积分 5,798　来自金獅電腦軟體工作室
真佩服楼上老兄的翻帖能力。希望能帮助你解决问题。

第23楼　Kinglion	发表于 2007-02-27 07:25
铂金会员　发帖 1,924　积分 5,798　来自金獅電腦軟體工作室
改天重新上传文件吧。当初的链接已经实效了。

第24楼　Kinglion	发表于 2007-02-27 22:45
铂金会员　发帖 1,924　积分 5,798　来自金獅電腦軟體工作室
----------------------------------------------------------------------------- H D - C O P Y 2 . 5 E ___________________________ ~^~^~^~^~^~^~^~^~^~^~^~^~^~ Copyright (c) 1992-96 by Oliver Fromme -- All Rights Reserved Oliver Fromme, Klingestr. 2, 38640 Goslar, Germany Internet email: fromme@rz.tu-clausthal.de This Program is CARDWARE. You may copy it, use it, and give it to your friends under the following conditions: * Don't charge any money for it. * Only distribute the complete package, without any files missing. * Don't modify the files in any way. * If you use this program or if you think that it's useful (or both...?), please send a postcard (e. g. with a beautiful picture of your home town), see my address above. * If you include this program on a CD-ROM, please send me a free copy of that CD-ROM. Distribution of HD-COPY in any way is explicitely desired, provided that the above conditions are met. ATTENTION: YOU ARE USING HD-COPY AT YOUR OWN RISK! THE AUTHOR (OLIVER FROMME) IS NOT LIABLE FOR ANY DAMAGE CAUSED BY THE USE OF HD-COPY OR BY THE INABILITY TO USE HD-COPY. IF YOU ARE NOT SURE ABOUT THIS, OR IF YOU DON'T ACCEPT THIS, THEN DO NOT USE HD-COPY! All product names mentioned in this manual and software are trademarks or registered trademarks of their respective owners. They are used for identification purposes only. ----------------------------------------------------------------------------- What is HD-COPY? ~~~~~~~~~~~~~~~~ HD-COPY is the fastest copy-program I know (and I know many) --- there's definitely no faster one. You can also use it to format disks at various formats (from 720 Kb to 1.764 Mb in this version of HD-COPY), which is faster than DOS' FORMAT and produces less errors. Of course you can also use it with lower density disks (720 Kb or 360 Kb). The following DD formats are supported: * 320 Kb, 360 Kb, 720 Kb * "special" DD formats: 400 Kb, 800 Kb, 820 Kb and similar The following HD formats are supported: * 5 1/4 inch drives: 1.2 Mb, 1.44 Mb, 1.48 Mb and similar * 3 1/2 inch drives: 1.2 Mb, 1.44 Mb, 1.48 Mb, 1.72 Mb and similar All these formats are compatible. For example, you can copy a 1.44Mb disk from 3 1/2 to 5 1/4. There's one exception: you can't copy more than 1.48 Mb to a 5 1/4 inch disk (it's impossible for technical and physical reasons). And, of course, you can't copy 1.2 Mb or more to a DD disk. Typical operation times of HD-COPY (without FAT-selection, see below): Format, Drive 1.2, 5? 1.2, 3? 1.44, 3? 1.44, 5? 1.72, 3? ----------------------------------------------------------------------- Read/Write/Verify(1) 30 32 36 58 70 Read/Write/Verify(2) 27 32 32 58 70 Form.+Write 67 64 80 107 131 Form.+Write+Verify 94 96 112 160 196 Format 54 65 65 55 67 Format+Verify 68 65 81 109 133 (1) applies to disks formatted with DOS' FORMAT or any other program (such as FDFORMAT). (2) applies to disks formatted with HD-COPY. As you can see, these disks are handled 3 to 4 seconds faster (at standard formats). When you switch on FAT-selection, the durations depend on how full the disk is: Format, Drive 1.2, 5? 1.2, 3? 1.44, 3? 1.44, 5? 1.72, 3? ------------------------------------------------------------------------ Read/Write/Verify(1) 0-30 0-32 0-36 0-58 0-70 Read/Write/Verify(2) 0-27 0-32 0-32 0-58 0-70 Form.+Write 54-67 64 64-80 54-107 64-131 Form.+Write+Verify 54-94 64-96 64-112 54-160 64-196 For 1.48 Mb, look at the duration for 1.44 Mb and add 2.5%. Note: To use non-standard disks (i.e. 5 1/4 disks with more than 1.2 Mb or 3 1/2 disks with more than 1.44 Mb) outside HD-COPY, you have to install a TSR program like FDREAD, because the DOS/BIOS doesn't like disks with an unusual number of sectors. HD-COPY itself doesn't need FDREAD, since it has its own routines to handle special formats. FDREAD and FDFORMAT are Public Domain programs by Christoph H. Hochst則ter, available on ftp-servers all over the world. With kind permission of Christoph H. Hochst則ter, FDREAD is distributed within the HD-Copy package. See FDREAD.DOC for instructions. ----------------------------------------------------------------------------- What do I need? ~~~~~~~~~~~~~~~ * IBM-AT or 100% compatible clone (80286 minimum!) * a mouse (Microsoft comp.) OR a keyboard (or both) * at least one disk drive (DD or HD) * a monochrome or colour adapter (Hercules, CGA, EGA, VGA) * MS-DOS 3.2 or above You needn't have the following, but it's recommended: * two HD (high density) disk drives * EGA or VGA color adapter * a mouse (Microsoft compatible) AND a keyboard What you MUST NOT have: * Software cache programs (e. g. SmartDrive, HyperDisk). If you have one, switch it off, at least for the floppy disk drives. (The current version of HD-Copy seems to work with Smartdrive (DOS 5.0/Windows 3.1) and HyperDisk, but that's not extensively tested.) * Other memory resident programs (TSRs), which are accessing your disk drives. Disable or unload them. HD-COPY works fine with monochrome adapters (like Hercules or MDA), but it doesn't look as good as with color adapters. ----------------------------------------------------------------------------- Sorry folks, I've not translated the entire manual. If there's somebody willing to do that, I'd very much appreciate it. Don't worry, HD-COPY is very easy to use, so you probably won't need a manual at all. There is an online help function: Use the cursor keys to select a menu entry, then press the F1 key to get a help text about that topic. If you are new to HD-COPY, then just start it by typing "HD-COPY" and read the online help of the menu entries which seem important to you. The remainder of this text file describes those things which are not covered by the online help. ----------------------------------------------------------------------------- General Usage Basically, there are three ways to work with HD-COPY: 1. The easiest way: use your mouse. Click on any main menu entry to perform the desired action. Click on any option entry to change that option. Click on the source window to read from the source disk. Click on the destination window to write to a destination disk. Click on the title line of the source/destination window to change the source/destination drive (only if you have two drives). Note: Disk read/write can only be interrupted by a key stroke, not by a mouse click. Click on "Format destination" (main menu) to enter the format menu, then choose your favourite disk format. 2. Use the cursor keys to walk around, hit the return key to perform the action which is highlighted. 3. Every action has a hot key (displayed in red). Experienced users may use this, because it's faster than mouse moving and clicking. Note that you must press the Shift key and the hot key simultaneously to access the options. Command Line Parameters Type "HD-COPY /?" to get a help text about command line parameters. Those parameters are evaluated in the following order: 1. Environment variable HD-COPYCMD 2. Configuration file HD-COPY.CFG (same directory as HD.COPY.EXE) 3. Command line parameters HD-COPY.CFG may contain comments, preceded by ";", "%" ,or "#", the remainder of the respective line is ignored. If a parameter occurs more than once (e.g. "/I- /I+"), the last one is valid (i.e. "/I+"). There's a "Save Configuration" function in the "Special" menu of HD-Copy, which automatically creates a HD-COPY.CFG file containing the current options. Buffering HD-COPY dynamically allocates memory to store the contents of disks (this is refered to as HD-COPY's internal buffer). If possible, HD-COPY uses XMS and/or EMS memory. If there is not enough such memory (or none at all), HD-COPY creates temporary swap files. First, it tries to create a swap file on a virtual RAM disk. The appropriate drive and directory is taken from one of these environment variables (in this order): HDCTEMP RAMDISK RAM If none of those variables are set, or if there is not enough free space, HD-COPY uses a swap file in C:\. Example: Assume you want to copy a disk which contains 1000 Kb, and there is 200 Kb of XMS and EMS each, and a RAM disk of 500 Kb. Then HD-COPY would allocate all of the XMS and EMS memory, create a 500 Kb swap file on the RAM disk, and a 100 Kb swap file on your hard disk (C:\). Compression of Image Files With "Put to file" (main menu) you can save an image of a disk to your hard disk (see the online help). By default, the image file is slightly compressed, so you can usually save it to another disk of the same format. But you should additionally compress it with a "real" compress utility (e.g. ZIP or ARJ) if you are going to archive lots of disk images. When you specify the command line parameter "/I-" (may also be changed in the configuration file), HD-COPY doesn't compress image files, but saves them as "raw" files without header, which is compatible with some other disk image utilities. Note that the "/I" parameter does not affect the "Get from file" function, since HD-COPY automatically recognizes if the image file is compressed or not. Formatting Disks I strongly recommend that you switch "Auto verify" on. Otherwise HD-COPY is not able to detect and correct any errors when formatting. (The same applies when writing to the destination disk, too.) Besides, HD-COPY is very fast, even if verification is switched on. Note that track 0 is always verified (regardless of the verify switch), since this track contains vital information (bootblock, FAT, root directory). If you format standard disks (max. 18 sectors at 3.5", 15 sectors at 5.25"), up to two bad sectors per track can be exchanged with "spare sectors" (similar to hard disks). In other words, you can format disks which contain bad blocks (or which FORMAT just refuses to format because the bad block is on track 0) and still get the full capacity (there are no bad blocks anymore)! If such an exchange takes place, the corresponding track is verified twice to ensure data safety. If there are three or more bad blocks on a track (or if you use a non-standard format), HD-Copy can't eliminate all bad blocks on that track. Of course the remaining bad blocks are marked (in the FAT), so they're not used for data storage. This also works when writing to the destination disk. When HD-COPY encounters an error while writing ("Auto verify" must be switched on!), it tries to reformat the track and exchange the bad sectors. Auto Verify I have said this before, but just to make sure that you don't miss it: If you're not ABSOLUTELY sure about the quality of your disks, turn "Auto Verify" on! It's worth the additional seconds, believe me. Password Protection Use this feature carefully! If "Password" is switched on, it applies to formatting, reading, writing AND verifying. To write (or read) a protected disk, it must be formatted with the same password. A protected disk can't be used with any other program (you get lots of errors). The only way to use it is to read it with HD-COPY (with the correct password, of course) and then write it to a normal disk WITHOUT protection. Note: The password is case sensitive ("Joe" and "JOE" are different passwords). You have to enter it twice, the letters are not displayed on the screen. "Risky" Mode (Refer to the online help for more information about the "Expert Mode".) If the "risky" mode is switched on, HD-COPY scans the disk drives every second. If there's a new disk in the source drive, it is immediately read. If there's a new disk in the destination drive, it is immediately written. So be careful! If source and destination drive are the same, source and destination disks are distinguished by the write-protection only. So protect your source disks! If you haven't used this mode before, you should try it first with some unimportant disks, until you are sure that you know how it works. This mode also works with the "Format" menu, which enables you to format lots of disks in a short time. Symbols These symbols are used in the source and destination window: R (green) : Read - the track was read successfully V (green) : Verify - the track was written correctly T (green) : Test - the track is formatted and (hmm...) can be read C (green) : Corrected - an bad block was successfully exchanged C (white) : Cleaning - used with the cleaning option W (blue) : Write - the track was written F (purple) : Format - the track was formatted E (red) : Error - a read or write error occured B (red) : Buffer error occured (transfer from/to buffer file) M (red) : Mismatch - disk and buffer data are different - (grey) : a free (empty) track (needs no further treatment) ?(grey) : a free (empty) track (not yet reached) (grey) : an allocated track (not yet reached) ----------------------------------------------------------------------------- That's all for this time. Hope you like it. But if it doesn't work, please tell me exactly what happened, what type of machine you used, which DOS and which TSRs you had installed (a copy of your CONFIG.SYS and AUTOEXEC.BAT would be helpful) and whatever you think it might be important. Thanks 8-) If you want me to send you a disk with the latest version of HD-Copy, send me DM 10 or US$ 10 cash (no other currencies, no stamps) to cover my expenses. If you have acces to Internet FTP, you can get the latest version from ftp.tu-clausthal.de /pub/msdos/utils/dskutl (there are other nice things, too), or use a WWW browser with this URL: http://www.rz.tu-claustha.de/~inof/Welcome.html Bye, So long, Ciao, Tschuess, Per aspera ad astra Oliver ----------------------------------------------------------------------------- Oliver Fromme, Klingestr. 2, 38640 Goslar, Germany Internet/Usenet email: fromme@rz.tu-clausthal.de WWW: http://www.rz.tu-claustha.de/~inof/Welcome.html ----------------------------------------------------------------------------- "To boldly go where no man has gone before..." (Star Trek) -----------------------------------------------------------------------------

第25楼　Kinglion	发表于 2007-02-27 22:49
铂金会员　发帖 1,924　积分 5,798　来自金獅電腦軟體工作室
重新上传文件压缩包由于论坛空间所限，请大家到我的下载空间下载。点此登录 [ Last edited by Kinglion on 2007-3-1 at 10:13 AM ]

第26楼　wang6610	发表于 2007-02-28 04:46
银牌会员　发帖 488　积分 1,246
Originally posted by Kinglion at 2007-2-27 10:49 PM: 重新上传文件压缩包上传不完整。。

第27楼　yardshine	发表于 2007-02-28 23:26
初级用户　发帖 64　积分 132
看大家说了半天，没明白到底哪个是最终版本。3.0是中文版吗？我还是相信外国人做的那个，只不过2.3中文版在哪下载？

第28楼　Kinglion	发表于 2007-03-01 00:04
铂金会员　发帖 1,924　积分 5,798　来自金獅電腦軟體工作室
Originally posted by wang6610 at 2007-2-28 04:46: 上传不完整。。你有更完整的版本吗？为何不上传？我以前上传的的确此这次上传的压缩包完整。只是为了节省空间，有些文件删除了而已。

第29楼　wang6610	发表于 2007-03-01 08:16
银牌会员　发帖 488　积分 1,246
Originally posted by Kinglion at 2007-3-1 12:04 AM: 你有更完整的版本吗？为何不上传？我以前上传的的确此这次上传的压缩包完整。只是为了节省空间，有些文件删除了而已。可能我没说清楚。是上传失败即不能成功解压。

第30楼　雨露	发表于 2007-03-01 08:18
管理员　发帖 2,601　积分 6,215
为何我下载的只有40KB，且打开时说文件受损，修复时也只能修三个文件，主文件无法修复？