|
lianjiang2004
金牌会员
     
积分 3946
发帖 1884
注册 2006-1-20
状态 离线
|
『第 151 楼』:
0130版dspt测试结果:两块硬盘显示均正常。
使用 LLM 解释/回答一下
0130版dspt测试结果:两块硬盘显示均正常。
若能提供dos下不带盘符和卷标的版本,那就太谢谢了。
2.1-2.6去港澳,2.8-月底回老家过年,这段时间可能就没时间测试新版本了。
期待你的正式版早日发布!
dspt
No. Drv Type Volume PartType Act Offset Sectors MBytes
0:1 Primary HPFS/NTFS Yes 63 15438402 7538
0:2 Primary pwin2k Hide HPFS/NTFS 15438465 15293880 7467
0:3 Logic HPFS/NTFS 30732408 20482812 10001
0:4 Logic MYDATA HPFS/NTFS 51215283 30732282 15005
0:5 C: Logic APPZ Win95 FAT32 81947628 61448562 30004
0:6 Logic DV HPFS/NTFS 143396253 90831447 44351
0:7 Logic Hide FAT16 234227763 208782 101
dpit
No. Drv Type Volume PartType Act Offset Sectors MBytes
0:1 Primary HPFS/NTFS Yes 63 15438402 7538
0:2 Primary pwin2k Hide HPFS/NTFS 15438465 15293880 7467
0:3 Extended LBA 30732345 203704200 99464
0:4 Logic HPFS/NTFS 30732408 20482812 10001
0:5 Logic MYDATA HPFS/NTFS 51215283 30732282 15005
0:6 C: Logic APPZ Win95 FAT32 81947628 61448562 30004
0:7 Logic DV HPFS/NTFS 143396253 90831447 44351
0:8 Logic Hide FAT16 234227763 208782 101
0130 version DSPT test results: Both hard drives are displayed normally.
If you can provide a version without drive letters and volume labels under DOS, it would be very thank you.
2.1 - 2.6 go to Hong Kong and Macau, 2.8 - go back to hometown for Chinese New Year at the end of the month, during this period may not have time to test the new version.
Looking forward to the official version of your early release!
DSPT
No. Drv Type Volume PartType Act Offset Sectors MBytes
0:1 Primary HPFS/NTFS Yes 63 15438402 7538
0:2 Primary pwin2k Hide HPFS/NTFS 15438465 15293880 7467
0:3 Logic HPFS/NTFS 30732408 20482812 10001
0:4 Logic MYDATA HPFS/NTFS 51215283 30732282 15005
0:5 C: Logic APPZ Win95 FAT32 81947628 61448562 30004
0:6 Logic DV HPFS/NTFS 143396253 90831447 44351
0:7 Logic Hide FAT16 234227763 208782 101
DPIT
No. Drv Type Volume PartType Act Offset Sectors MBytes
0:1 Primary HPFS/NTFS Yes 63 15438402 7538
0:2 Primary pwin2k Hide HPFS/NTFS 15438465 15293880 7467
0:3 Extended LBA 30732345 203704200 99464
0:4 Logic HPFS/NTFS 30732408 20482812 10001
0:5 Logic MYDATA HPFS/NTFS 51215283 30732282 15005
0:6 C: Logic APPZ Win95 FAT32 81947628 61448562 30004
0:7 Logic DV HPFS/NTFS 143396253 90831447 44351
0:8 Logic Hide FAT16 234227763 208782 101
|

Windows 一键还原
http://www.yjhy.com |
|
2007-1-31 01:06 |
|
|
19951001
高级用户
    流落街头
积分 570
发帖 272
注册 2005-10-17 来自 北京
状态 离线
|
『第 152 楼』:
使用 LLM 解释/回答一下
to lianjiang2004:
你要的不显示盘符和卷标的版本,没有时间限制。
Last edited by 19951001 on 2007-2-6 at 06:05 AM ]
to lianjiang2004:
The version that doesn't display drive letters and volume labels you requested, there's no time limit.
Last edited by 19951001 on 2007-2-6 at 06:05 AM ]
|
|
2007-1-31 06:11 |
|
|
lianjiang2004
金牌会员
     
积分 3946
发帖 1884
注册 2006-1-20
状态 离线
|
『第 153 楼』:
使用 LLM 解释/回答一下
Originally posted by 19951001 at 2007-1-31 06:11:
to lianjiang2004:
你要的不显示盘符和卷标的版本,没有时间限制。
收下了,谢谢!
Originally posted by 19951001 at 2007-1-31 06:11:
to lianjiang2004:
The version that doesn't display the drive letter and volume label you requested, with no time limit.
Received, thank you!
|

Windows 一键还原
http://www.yjhy.com |
|
2007-1-31 06:32 |
|
|
pfox
银牌会员
    
积分 1451
发帖 446
注册 2002-10-20
状态 离线
|
『第 154 楼』:
使用 LLM 解释/回答一下
Originally posted by 19951001 at 2007-1-28 11:32 PM:
to pfox:
一楼的版本没有时间限制,没有加入显示卷标的 ...
一楼的版本不符合我的要求,要107喽版本的无限制版,看来只有期待3月1日了。
The first-floor version doesn't meet my requirements. I want the unlimited version of the 107th floor version. It seems I can only wait until March 1st.
|

我的下载空间 |
|
2007-2-8 22:49 |
|
|
pfox
银牌会员
    
积分 1451
发帖 446
注册 2002-10-20
状态 离线
|
『第 155 楼』:
使用 LLM 解释/回答一下
Originally posted by lianjiang2004 at 2007-1-30 09:27 PM:
有个请求,不知作者以后能否考虑?
具体要求:增加参数,控制是否显示盘符,盘标。
缘由:
我在一键备份恢复的【批处理】中要用dpit在DOS下获取 ...
为什么不用lmod配合tfind处理呢?
Originally posted by lianjiang2004 at 2007-1-30 09:27 PM:
There is a request. I wonder if the author can consider it in the future?
Specific requirements: Add parameters to control whether to display the drive letter and drive label.
Reason:
I need to use dpit to obtain... in the for one-click backup and restore...
Why not use lmod in combination with tfind for processing?
|

我的下载空间 |
|
2007-2-8 22:54 |
|
|
cchessbd
高级用户
   
积分 525
发帖 222
注册 2006-8-28
状态 离线
|
『第 156 楼』:
使用 LLM 解释/回答一下
可以发正式版了吗
Can the official version be released?
|
|
2007-2-10 05:38 |
|
|
llztt1
中级用户
  
积分 214
发帖 94
注册 2007-1-11
状态 离线
|
『第 157 楼』:
使用 LLM 解释/回答一下
请解决
把加载IFS或NTFS驱动后的盘符加进去
添加功能:默认不加硬盘号参数,就操作所有硬盘
谢谢哈
Please solve
Add the drive letters after loading the IFS or NTFS driver
Add function: By default, do not add the hard disk number parameter, just operate all hard disks
Thank you ha
|
|
2007-2-11 07:50 |
|
|
terse
银牌会员
    
积分 2404
发帖 946
注册 2005-9-8
状态 离线
|
『第 158 楼』:
使用 LLM 解释/回答一下
为什么不能象GHOST一样以1:X表示第一硬盘 2:X表示第二硬盘呢?
我用dipt 1 /find:all 得到的是 1:X 自动ghost还是麻烦啊!
也许是我用的不对吧!有没有同时显示多块硬盘的参数啊?
Why can't it be like GHOST where 1:X represents the first hard disk and 2:X represents the second hard disk?
I used dipt 1 /find:all and got 1:X. Automatically ghosting is still troublesome!
Maybe I'm using it incorrectly. Is there a parameter that can display multiple hard disks at the same time?
|
|
2007-2-11 10:23 |
|
|
llztt1
中级用户
  
积分 214
发帖 94
注册 2007-1-11
状态 离线
|
『第 159 楼』:
使用 LLM 解释/回答一下
只要硬盘分区结构解析正确,统一一个标准就行,反正都得用批处理分析之
19951001能给我一份无限制的不显示盘符的吧??谢谢
As long as the hard disk partition structure is parsed correctly and a unified standard is established, anyway, it has to be analyzed with batch processing.
19951001, can you give me a version without restrictions that doesn't display the drive letters?? Thanks
|
|
2007-2-11 13:32 |
|
|
lianjiang2004
金牌会员
     
积分 3946
发帖 1884
注册 2006-1-20
状态 离线
|
『第 160 楼』:
使用 LLM 解释/回答一下
只要硬盘分区结构解析正确,统一一个标准就行,反正都得用批处理分析之
-----------------
同意。这是问题关键。其它只是形式问题。
As long as the hard disk partition structure is analyzed correctly and a unified standard is established, anyway, it all needs to be analyzed with batch processing.
-----------------
Agreed. This is the key issue. The others are just form issues.
|

Windows 一键还原
http://www.yjhy.com |
|
2007-2-11 22:01 |
|
|
llztt1
中级用户
  
积分 214
发帖 94
注册 2007-1-11
状态 离线
|
『第 161 楼』:
使用 LLM 解释/回答一下
lianjiang2004
发给我一份无限制不显盘符的DPIT吧,做网刻批处理用
现在一楼的版本显盘符,我觉得显示不了IFS加载后NTFS盘符这个问题没解决前 显示盘符功能就算鸡肋了
还有一楼那个版本我用DPIT /1 /L正常,一加/NOEXT 竟然就参数错误,出来一大堆使用介绍
lianjiang2004
Send me a version of DPIT without restrictions and no drive letters displayed, for use in network boot batch processing.
Now the version on the first floor displays drive letters. I think this problem of not being able to display NTFS drive letters after IFS is loaded has not been solved. Before this problem is solved, the drive letter display function is even a chicken rib.
Also, with the version on the first floor, I use DPIT /1 /L normally. But as soon as I add /NOEXT, there is a parameter error, and a lot of usage introductions come out.
|
|
2007-2-11 22:29 |
|
|
lianjiang2004
金牌会员
     
积分 3946
发帖 1884
注册 2006-1-20
状态 离线
|
『第 162 楼』:
使用 LLM 解释/回答一下
你翻一下,几天前作者发了个无限制,不显示盘符卷标的版本。我现在是在老家,用电话上网,非常慢。也可下个2006-12-26版本。
下面是061226版。不知能否传上去。
Last edited by lianjiang2004 on 2007-2-12 at 01:10 AM ]
A few days ago the author released a version without restrictions and without displaying the drive letter volume label. I'm now in my hometown and using the phone to access the internet, which is very slow. You can also download the version from 2006-12-26.
The following is the 061226 version. I don't know if it can be uploaded.
Last edited by lianjiang2004 on 2007-2-12 at 01:10 AM ]
附件
1: dpit1226.rar (2007-2-12 01:09, 14.48 KiB, 下载附件所需积分 1 点
,下载次数: 14)
|

Windows 一键还原
http://www.yjhy.com |
|
2007-2-12 00:49 |
|
|
llztt1
中级用户
  
积分 214
发帖 94
注册 2007-1-11
状态 离线
|
『第 163 楼』:
使用 LLM 解释/回答一下
OK,测试正常,/NOEXT也能使用了,多谢啦,呵呵
OK, the test is normal, and /NOEXT can also be used. Thanks a lot, hehe
|
|
2007-2-12 04:40 |
|
|
llztt1
中级用户
  
积分 214
发帖 94
注册 2007-1-11
状态 离线
|
『第 164 楼』:
使用 LLM 解释/回答一下
发现DPIT AEFDISK等工具都没有很全面显示硬盘分区结构,譬如我设置硬盘有空的未分配空间,DPIT或AEFDISK都无视之,只显示出了已经划分过分区,而XUSEN工具盘中的PSI就好些了,显示结果和WINDOWS下看到的一致。。
是不是我应用的参数不对,我就用了DPIT 0 /L来显示分区机构的。。
I found that tools like DPIT and AEFDISK don't fully display the hard disk partition structure. For example, I set there is empty unallocated space on the hard disk, but DPIT or AEFDISK ignore it and only show the partitioned parts. However, PSI in the XUSEN tool disk is better, and the display result is consistent with what is seen under WINDOWS. Is it because I used the wrong parameters? I just used DPIT 0 /L to display the partition structure.
|
|
2007-2-12 22:57 |
|
|
19951001
高级用户
    流落街头
积分 570
发帖 272
注册 2005-10-17 来自 北京
状态 离线
|
『第 165 楼』:
使用 LLM 解释/回答一下
Originally posted by terse at 2007-2-11 10:23:
为什么不能象GHOST一样以1:X表示第一硬盘 2:X表示第二硬盘呢?
我用dipt 1 /find:all 得到的是 1:X 自动ghost还是麻烦啊!
也许是我用的不对吧!有没有同时显示多块硬盘的参数啊?
DPIT 加入 /ghost 参数可以满足你的要求
Originally posted by terse at 2007-2-11 10:23:
Why can't it be like GHOST where 1:X represents the first hard disk and 2:X represents the second hard disk?
Using dipt 1 /find:all gives me 1:X, and it's still troublesome to automatically ghost!
Maybe I'm not using it correctly. Is there a parameter to display multiple hard disks at the same time?
DPIT with the /ghost parameter can meet your requirements
|
|
2007-2-13 00:05 |
|