QEMM 系列（6.0---9.01）下载！！！ - 中国DOS联盟论坛

Quarterdeck Expanded Memory Manager 386 V9.0
Copyright (c) 1986-1997 by Quarterdeck Corporation
U.S. Patent Numbers 5,237,669 and 5,367,658
Serial number: QEDU9000108543
Registered to: GOD

赏屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯?
? QEMM386 ?
? Copyright (c) 1986-1997 ?
? Quarterdeck Corporation ?
? ?
? QEMM is an expanded memory manager for 80386, 80486 ?
? and Pentium computers. It also provides High RAM ?
? and other capabilities. ?
? ?
?Syntax: ?
? DEVICE=QEMM386.SYS [switches] ?
? ?
?QEMM switches: ?
? ADAPTERRAM=xxxx-yyyy An adapter has RAM in the range ?
? ADAPTERROM=xxxx-yyyy An adapter has ROM in the range ?
? AUTO Turn on only if necessary ?
? BOOTCOLORS:N:R:B:C:S:T List of color attributes to customize ?
? the QuickBoot Menu (i.e. for monochrome ?
? monitors use BOOTCOLORS:7:70:7:7:7:7) ?
? BOOTENABLE:N Disable QuickBoot ?
? BOOTFLOPPY:N Don't check floppy first for QuickBoot ?
? BOOTTIMEOUT=xx Countdown in seconds for the QuickBoot Menu ?
? BOOTVIA19:N Disable QuickBoot broadcast to drivers and TSRs ?
? COMPAQ386S Identify this as a COMPAQ 386S ?
? COMPAQEGAROM Relocate COMPAQ's video ROM ?
? COMPAQFEATURES:N Disable EGAROM, HALFROM, ROMMEMORY ?
? COMPAQHALFROM Split system ROM in half ?
? COMPAQROMMEMORY Use COMPAQ memory reserved for ROM ?
? DISKBUF=xx Set the size of the SCSI disk buffer ?
? DISKBUFFRAME=xx Buffer disk access into the page frame ?
? DMA=xx Set the size of the DMA buffer ?
? DOS4 Alter EMS page ordering for DOS 4.00 ?
? EMBMEM=xxxxx Limit memory available as EMBs to xxxxxK ?
? EMS:N Do not be an expanded memory manager ?
? EXCLUDE=xxxx-yyyy Consider the range unmappable ?
? EXCLUDEBYTES=xxxxx:nnnn Preserve nnnn bytes inside mapped ?
? region at linear address xxxxx ?
? EXCLUDESTEALTH=xxxx Do not Stealth a particular ROM ?
? EXCLUDESTEALTHINT=xx Do not Stealth a particular interrupt ?
? EXTMEM=xxxxx Reserve xxxxxK of extended memory ?
? FASTINT10:n Do not speed up INT 10s with Stealth ?
? FILL:N Do not fill conventional memory ?
? FORCEEMS Still act like EMS even if no frame ?
? FORCESTEALTHCOPY Copy tables even when eXcluded ?
? FRAME=xxxx Set the page frame; xxxx=seg or NONE ?
? FRAMEBUF:y/n Buffer INT 21s into the page frame ?
? FRAMELENGTH=x Set the page frame to be x pages ?
? GETSIZE[:f] Report the memory used if loaded high ?
? HANDLES=xxx Set the number of EMS handles ?
? HMA:N Do not allow access to the HMA ?
? HMAMIN=xx Set the minimum size of the HMA (0-63K) ?
? IBMBASIC Maintain access to the IBM Basic area ?
? INCLUDE=xxxx-yyyy Consider the range available for high RAM ?
? LOCKDMA Do not allow interrupts during DMA processing ?
? MAPREBOOT:N Do not map the "reboot" page of the system ROM ?
? MAPS=xx Set the number of alternate register sets ?
? MEMORY=xxxxx Use only xxxxxK of extended memory ?
? OFF Turn QEMM OFF ?
? ON Turn QEMM ON ?
? PENT:VME[:nn][:N] Disable Pentium int monitoring extensions ?
? by individual soft int (:nn 0-FF) ?
? or completely (:N) ?
? PENT:PSE:N Disable Pentium paging extensions ?
? RAM[=xxxx-yyyy] Put RAM everywhere or in the range ?
? REGION=x Specify the region to load high into ?
? RESPONSEFILE=name Specify the file to get the Region from ?
? ROM[=xxxx[-yyyy]] Map ROM everywhere or in the range ?
? ROMHOLES:N Do not find holes in the system ROM ?
? SHADOWRAM:type Specify the type of ShadowRAM ?
? (LEAP, NEAT, NEC, OPTI, PEAK, SCAT, ?
? TOPCAT, 386, CY82C597, or NONE) ?
? SORT:Y Sort memory by speed ?
? STEALTHTHUNK=xxxx-yyyy Special Stealth compatiblity page ?
? STEALTHROM:m/f Reclaim address space of ROMs ?
? SUSPENDRESUME Support "Suspend/Resume" feature of laptop ?
? TASKS=xx Set the interrupt nesting level ?
? TOKENRING:N Do not look for a token ring adapter ?
? TOPMEMORY:N Do not look for "top memory" ?
? TRAP8042 Trap I/O to the 8042 to disable A20 ?
? UNMAPFREEPAGES Unmap pages from the frame when free ?
? UNUSUALEXT The extended memory BIOS is non-standard ?
? USERAM=xxxxxxx-yyyyyyy Specify paragraphs of additional ?
? memory that QEMM cannot otherwise find ?
? USEXMS:N Do not allow QEMM to get memory from XMS ?
? VCPISHARE:Y Share the page table with VCPI clients ?
? VDS:N Disable support for Virtual DMA Services ?
? VIDEOFILL:N Do not fill into video memory ?
? VIDEORAM:N Do not put RAM into video memory ?
? VIDRAMEGA Configure for EGA feature of VIDRAM ?
? VIDRAMEMS Configure for EMS feature of VIDRAM ?
? VIRTUALHDIRQ:N Do not suppress INT 15/90 with Stealth ?
? VXDDIR=path Specify the directory of the .VXD files ?
? WATCHDOG=[0,1,2] Set the type of Watchdog timer ?
? WINDOWS3:N Do not support Windows 3 ?
? WINSHRINKUMBS:N Do not reclaim unused High RAM for WINDOWS ?
? XBDA:n/y/h/l/f Control whether the extended BIOS Data Area ?
? is relocated High or Low or Not moved ?
? XMS:N Do not be an extended memory manager ?
? PAUSEONERROR:N Do not pause on error ?
? PAUSE Pause while parsing commands ?
? HELP Display this help text ?
? ? List all commands ?
韧屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯?

第1楼　3dfx	发表于 2010-03-10 02:13
高级用户　发帖 195　积分 721
QEMM 系列（6.0---9.01）下载！！！ QEMM6.0 http://u.115.com/file/f47a940f06 qemm60.zip QEMM7.03 http://u.115.com/file/f4d8f1e71 qemm703.zip QEMM7.04 http://u.115.com/file/f42da4d72 QEMM-v7.04.rar QEMM7.5 http://u.115.com/file/f4f2e30a1d QEMM75.rar QEMM8 http://u.115.com/file/f46272158d QEMM8.rar QEMM97(9.0) http://u.115.com/file/f485e9fa88 QEMM97.rar QEMM97(9.01) http://u.115.com/file/f475d73d03 QEMM_97_9.01.zip

第2楼　3dfx	发表于 2010-03-10 02:18
高级用户　发帖 195　积分 721
Quarterdeck Expanded Memory Manager 386 V9.0 Copyright (c) 1986-1997 by Quarterdeck Corporation U.S. Patent Numbers 5,237,669 and 5,367,658 Serial number: QEDU9000108543 Registered to: GOD 赏屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯? ? QEMM386 ? ? Copyright (c) 1986-1997 ? ? Quarterdeck Corporation ? ? ? ? QEMM is an expanded memory manager for 80386, 80486 ? ? and Pentium computers. It also provides High RAM ? ? and other capabilities. ? ? ? ?Syntax: ? ? DEVICE=QEMM386.SYS [switches] ? ? ? ?QEMM switches: ? ? ADAPTERRAM=xxxx-yyyy An adapter has RAM in the range ? ? ADAPTERROM=xxxx-yyyy An adapter has ROM in the range ? ? AUTO Turn on only if necessary ? ? BOOTCOLORS:N:R:B:C:S:T List of color attributes to customize ? ? the QuickBoot Menu (i.e. for monochrome ? ? monitors use BOOTCOLORS:7:70:7:7:7:7) ? ? BOOTENABLE:N Disable QuickBoot ? ? BOOTFLOPPY:N Don't check floppy first for QuickBoot ? ? BOOTTIMEOUT=xx Countdown in seconds for the QuickBoot Menu ? ? BOOTVIA19:N Disable QuickBoot broadcast to drivers and TSRs ? ? COMPAQ386S Identify this as a COMPAQ 386S ? ? COMPAQEGAROM Relocate COMPAQ's video ROM ? ? COMPAQFEATURES:N Disable EGAROM, HALFROM, ROMMEMORY ? ? COMPAQHALFROM Split system ROM in half ? ? COMPAQROMMEMORY Use COMPAQ memory reserved for ROM ? ? DISKBUF=xx Set the size of the SCSI disk buffer ? ? DISKBUFFRAME=xx Buffer disk access into the page frame ? ? DMA=xx Set the size of the DMA buffer ? ? DOS4 Alter EMS page ordering for DOS 4.00 ? ? EMBMEM=xxxxx Limit memory available as EMBs to xxxxxK ? ? EMS:N Do not be an expanded memory manager ? ? EXCLUDE=xxxx-yyyy Consider the range unmappable ? ? EXCLUDEBYTES=xxxxx:nnnn Preserve nnnn bytes inside mapped ? ? region at linear address xxxxx ? ? EXCLUDESTEALTH=xxxx Do not Stealth a particular ROM ? ? EXCLUDESTEALTHINT=xx Do not Stealth a particular interrupt ? ? EXTMEM=xxxxx Reserve xxxxxK of extended memory ? ? FASTINT10:n Do not speed up INT 10s with Stealth ? ? FILL:N Do not fill conventional memory ? ? FORCEEMS Still act like EMS even if no frame ? ? FORCESTEALTHCOPY Copy tables even when eXcluded ? ? FRAME=xxxx Set the page frame; xxxx=seg or NONE ? ? FRAMEBUF:y/n Buffer INT 21s into the page frame ? ? FRAMELENGTH=x Set the page frame to be x pages ? ? GETSIZE[:f] Report the memory used if loaded high ? ? HANDLES=xxx Set the number of EMS handles ? ? HMA:N Do not allow access to the HMA ? ? HMAMIN=xx Set the minimum size of the HMA (0-63K) ? ? IBMBASIC Maintain access to the IBM Basic area ? ? INCLUDE=xxxx-yyyy Consider the range available for high RAM ? ? LOCKDMA Do not allow interrupts during DMA processing ? ? MAPREBOOT:N Do not map the "reboot" page of the system ROM ? ? MAPS=xx Set the number of alternate register sets ? ? MEMORY=xxxxx Use only xxxxxK of extended memory ? ? OFF Turn QEMM OFF ? ? ON Turn QEMM ON ? ? PENT:VME[:nn][:N] Disable Pentium int monitoring extensions ? ? by individual soft int (:nn 0-FF) ? ? or completely (:N) ? ? PENT:PSE:N Disable Pentium paging extensions ? ? RAM[=xxxx-yyyy] Put RAM everywhere or in the range ? ? REGION=x Specify the region to load high into ? ? RESPONSEFILE=name Specify the file to get the Region from ? ? ROM[=xxxx[-yyyy]] Map ROM everywhere or in the range ? ? ROMHOLES:N Do not find holes in the system ROM ? ? SHADOWRAM:type Specify the type of ShadowRAM ? ? (LEAP, NEAT, NEC, OPTI, PEAK, SCAT, ? ? TOPCAT, 386, CY82C597, or NONE) ? ? SORT:Y Sort memory by speed ? ? STEALTHTHUNK=xxxx-yyyy Special Stealth compatiblity page ? ? STEALTHROM:m/f Reclaim address space of ROMs ? ? SUSPENDRESUME Support "Suspend/Resume" feature of laptop ? ? TASKS=xx Set the interrupt nesting level ? ? TOKENRING:N Do not look for a token ring adapter ? ? TOPMEMORY:N Do not look for "top memory" ? ? TRAP8042 Trap I/O to the 8042 to disable A20 ? ? UNMAPFREEPAGES Unmap pages from the frame when free ? ? UNUSUALEXT The extended memory BIOS is non-standard ? ? USERAM=xxxxxxx-yyyyyyy Specify paragraphs of additional ? ? memory that QEMM cannot otherwise find ? ? USEXMS:N Do not allow QEMM to get memory from XMS ? ? VCPISHARE:Y Share the page table with VCPI clients ? ? VDS:N Disable support for Virtual DMA Services ? ? VIDEOFILL:N Do not fill into video memory ? ? VIDEORAM:N Do not put RAM into video memory ? ? VIDRAMEGA Configure for EGA feature of VIDRAM ? ? VIDRAMEMS Configure for EMS feature of VIDRAM ? ? VIRTUALHDIRQ:N Do not suppress INT 15/90 with Stealth ? ? VXDDIR=path Specify the directory of the .VXD files ? ? WATCHDOG=[0,1,2] Set the type of Watchdog timer ? ? WINDOWS3:N Do not support Windows 3 ? ? WINSHRINKUMBS:N Do not reclaim unused High RAM for WINDOWS ? ? XBDA:n/y/h/l/f Control whether the extended BIOS Data Area ? ? is relocated High or Low or Not moved ? ? XMS:N Do not be an extended memory manager ? ? PAUSEONERROR:N Do not pause on error ? ? PAUSE Pause while parsing commands ? ? HELP Display this help text ? ? ? List all commands ? 韧屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯?

第3楼　Michael	发表于 2010-03-10 09:27
钻石会员　发帖 3,041　积分 10,056
QEMM好是好，就是兼容性太差了。

第4楼　DOSforever	发表于 2010-03-10 21:03
金牌会员　发帖 2,239　积分 4,639
goooooooooooooooooooooooooood

第5楼　DOSforever	发表于 2010-03-10 21:06
金牌会员　发帖 2,239　积分 4,639
QEMM 唯一的缺点就是几乎只为 MS-DOS 所设计的，在其它版本的 DOS 下无法发挥出它的内存优化特性。

第6楼　DOSforever	发表于 2010-03-10 21:08
金牌会员　发帖 2,239　积分 4,639
令我们 QEMM 爱好者所遗憾的是，至今为止都没找到 QEMM 参数的详细用法说明。

第7楼　DOSforever	发表于 2010-03-10 21:56
金牌会员　发帖 2,239　积分 4,639
下载看了下，除了 6.0 外，其它的都是安装版，并且都有序列号提供。很好，很好，甚好，甚慰。

第8楼　DOSforever	发表于 2010-03-10 22:00
金牌会员　发帖 2,239　积分 4,639
Originally posted by Michael at 2010-3-10 09:27: QEMM好是好，就是兼容性太差了。以前我就一直听说 QEMM 兼容性太差了，不过我用下来几乎没遇到兼容性问题，好像是说和游戏的兼容性差。不过从另一方面说 QEMM 的防死机功能比 EMM386 强，遇到不是很严重的错误时它会提示你是终止这条指令还是 reboot 。

第9楼　kaixinmao	发表于 2010-04-03 19:06
初级用户　发帖 14　积分 27
下来了各个版本都实验了下，发现对内存的支持还是很容易造成错误。

第10楼　tangtai	发表于 2010-04-06 21:10
等待验证用户　发帖 314　积分 640
谢谢楼主分享噢！！！

第11楼　willsion	发表于 2010-04-14 13:24
高级用户　发帖 312　积分 793
晕，这么快就过期了？

第12楼　3dfx	发表于 2010-04-15 13:27
高级用户　发帖 195　积分 721
重新激活了下载地址。。。快去下吧。。。

第13楼　wl00560	发表于 2010-04-15 14:06
银牌会员　发帖 709　积分 1,384
终于可以下载了，就是速度慢了点，好在文件不大……

第14楼　willsion	发表于 2010-04-19 18:04
高级用户　发帖 312　积分 793
Originally posted by 3dfx at 2010-4-15 01:27 PM: 重新激活了下载地址。。。快去下吧。。。谢谢，已经下载了。

第15楼　7825252	发表于 2010-07-27 19:02
新手上路　发帖 3　积分 6
樓主真是好心~各種版本都有~感恩的心...