My Netac USB flash drive (16M) can be recognized under DOS, but it can't be assigned a drive letter, and after detection finishes it hangs. The exact prompt is as follows: (I'm using Wengier's DOS 7.1 boot disk)
ASPIi Manager for USB mass-storage Version 2.06
copyright ------------------------------------2000-2003(copyright info)
ID:0 LUN:0=Netac Onlydisk 2000
DI1000 ASPI Disk Drive Ver 2.0
Copyright(c) 2001 NOVAC CO.LTD
Available ID=0
ID 0 = H.. Netac Onlydisk
#1: ???
Your program caused a divide overflow error
If the problem persists contact your program vendor.
After the above information is shown, the system hangs and does nothing further.
What exactly is going on?
ASPIi Manager for USB mass-storage Version 2.06
copyright ------------------------------------2000-2003(copyright info)
ID:0 LUN:0=Netac Onlydisk 2000
DI1000 ASPI Disk Drive Ver 2.0
Copyright(c) 2001 NOVAC CO.LTD
Available ID=0
ID 0 = H.. Netac Onlydisk
#1: ???
Your program caused a divide overflow error
If the problem persists contact your program vendor.
After the above information is shown, the system hangs and does nothing further.
What exactly is going on?



